Claas Maxflex 930-560 (530) Combines Operator Manual FR

File List:

00 0300 955 7.pdf

00 0300 955 7.pdf:

Instructions for use
Contents
1 Introduction
1.1 General instructions
1.1.1 Validity of the notice
1.1.2 Information regarding this user manual
1.1.3 Icons and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Notes on maintenance
1.1.7 Notes regarding warranty
1.1.8 Spare parts and technical questions
1.2 Use in accordance with instructions
1.2.1 Use in accordance with instructions
1.2.2 Reasonably foreseeable misuse
2 Security
2.1 Recognize the warnings
2.1.1 Warning pictogram
2.1.2 Signal word
2.2 Safety tips
2.2.1 Meaning of the instructions for use
2.2.2 Observe warning pictograms and warnings
2.2.3 Requirements for all people who work with the machine
2.2.4 Risk areas
2.2.5 Do not stand between the machine and the front tool
2.2.6 Passengers
2.2.7 Couple the machine with the front tool or cutting carriage
2.2.8 Risk of injury due to rotating shafts
2.2.9 Constructive modifications
2.2.10 Optional equipment and spare parts
2.2.11 Operation only after proper commissioning
2.2.12 Technical condition
2.2.13 Risks in the event of damage to the machine
2.2.14 Maintain safety devices in operational capacity
2.2.15 Personal safety equipment
2.2.16 Wear suitable clothing
2.2.17 Remove dirt and loose objects
2.2.18 Prepare the machine for road travel
2.2.19 Inappropriate operating consumables
2.2.20 Safety in handling operating consumables and secondary consumable materials
2.2.21 Environmental protection and disposal
2.2.22 Electric shock from the electrical system
2.2.23 Liquids under pressure
2.2.24 Only carry out work on the machine when it is stopped
2.2.25 Maintenance and repair work
2.2.26 Machine elements recorded and loads
2.2.27 Risks due to welding work
2.3 Safety marking
2.3.1 Structure of warning pictograms
2.3.2 Warning pictograms on the front tool
3 Description of the machine
3.1 Overview and mode of operation
3.1.1 Overview
3.1.2 Conservation of the instructions for use
3.1.3 MAXFLEX operating mode
3.2 Optional machine equipment
3.2.1 Cereal sensing stirrup
3.2.2 Stone deflector
3.2.3 Scrapers
3.2.4 Outer fingers of the reel
3.2.5 Anti-winding device
3.2.6 Exterior baffle extension
3.2.7 Lighting
3.3 Nameplates and identification numbers
3.3.1 Front tool nameplate
3.4 Machine information
3.4.1 Sticker
4 Control and display elements
4.1 Front tool
4.1.1 Control panel
5 Technical characteristics
5.1 MAXFLEX
5.1.1 Authorized machines
5.1.2 Dimensions
5.1.3 Weight
5.1.4 Cutting widths
5.1.5 Reel
5.1.6 Feed auger
5.1.7 Cutting device
5.2 Operating consumables
5.2.1 Lubricants
6 Preparing the machine
6.1 Stop and immobilize the machine
6.1.1 Stop and immobilize the machine
6.2 Load the front tool
6.2.1 Load the front implement and secure it
6.3 Install the front tool
6.3.1 Install the front tool
6.3.2 Prepare for locking
6.3.3 Hanging the front tool
6.3.4 Lock the front tool
6.3.5 Install the cardan shaft
6.3.6 Hanging the PTO shaft protection chain
6.3.7 Install the multicoupler
6.3.8 Setting the front implement on the combine harvester information system
6.4 Remove the front tool
6.4.1 Remove the front tool
6.4.2 Remove the multicoupler
6.4.3 Remove the cardan shaft
6.4.4 Unlock the front tool
6.4.5 Unhook the front tool
6.5 Harvest collection
6.5.1 Install the reel safety supports
6.5.2 Loosen the reel safety legs
6.6 Feed auger
6.6.1 Adapt the scraper profiles according to the supply channel
6.7 Cutting device
6.7.1 Install the protection device on the cutter bar
7.1 Driving the machine
7.1.1 Prepare for road travel
7.1.2 Prepare to move into the field
7.1.3 Adjusting the parking position
7.1.4 Adjust the working position
7.1.5 Before work
7.1.6 Check crop absorption
7.2 Cereal harvest
7.2.1 Adjusting the front implement to the grain harvest
7.2.2 Lock the cutting deck
7.2.3 Install the grain feeler stirrups*
7.3 Soybean harvest
7.3.1 Adjust the front implement according to the soybean harvest
7.3.2 Remove the grain feeler brackets*
7.3.3 Unlock the cutting deck
7.4 Management
7.4.1 Unfold the LASER PILOT*
7.5 Electrical and electronic system
7.5.1 Connecting and disconnecting lighting*
Control the lighting on the front tool
Control lighting from the cabin
7.6 Harvest collection
7.6.1 Mount the divider
Set the divider
7.6.2 Install the divider tips
7.6.3 Remove the divider tips
7.6.4 Install the exterior deflector*
7.6.5 Remove the exterior deflector*
7.6.6 Adjust the reel fingers
7.7 Feed auger
7.7.1 Adjust the scraper profiles of the feed auger
7.7.2 Adjust the position of the feed auger
7.7.3 Adjust the feed auger fingers
7.7.4 Remove the auger plate extensions
7.7.5 Install the worm sheet extensions
7.7.6 Change feed auger speed
7.8 Cutting device
7.8.1 Adjusting the cutting height for soybean harvesting
7.8.2 Installing and removing the corn lifter with the quick release
Install the corn lifter
Remove the corn lifter
7.8.3 Install and remove the corn lifters
7.8.4 Changing the knife drive speed
7.9 Ground guidance
7.9.1 Adjust the skates
8 Faults and solutions
8.1 Causes and remedies
8.1.1 Improve harvest flow
8.1.2 Harvest collection
8.1.3 Feed auger
8.1.4 Cutting device
8.1.5 Ground guidance
8.2 Electrical and electronic system
8.2.1 Prepare welding work
8.3 Hydraulic system
8.3.1 Balancing the reel hydraulic cylinders
8.4 Harvest collection
8.4.1 Carry out the basic reel height adjustment
8.4.2 Replacing the reel fingers
8.5 Feed auger
8.5.1 Replace feed auger fingers with quick lock
8.5.2 Replace the feed auger fingers
8.5.3 Remove the dust plate
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or every day
9.1.2 Every 100 operating hours
9.1.3 Every 250 operating hours
9.1.4 Every 500 hours of service or annually
9.1.5 Preservation measures for the front tool
9.2 Lubrication plan
9.2.1 Lubricate the lubrication points every 10 operating hours
Valid for: MONTANA
9.2.2 Lubricate the lubrication points every 100 operating hours
9.2.3 Lubricate the lubrication points every 250 operating hours
9.3 Workouts
9.3.1 Setting drives
9.3.2 Remove the belt (R01)
9.3.3 Install the belt (R01)
9.3.4 Adjust the belt (R01)
9.3.5 Remove the chain (K01)
9.3.6 Install the chain (K01)
9.3.7 Adjust the chain (K01)
9.3.8 Remove the chain (K02)
9.3.9 Install the chain (K02)
9.3.10 Adjust the chain (K02)
9.4 Hydraulic system
9.4.1 Check hydraulic hose lines
9.5 Harvest collection
9.5.1 Clean the cutting deck
9.6 Cutting device
9.6.1 Replacing the knives
9.6.2 Replacing the segmented knife
Install the knife connector
Assemble the knife segments (A) with the reinforcing plate
Assemble the knife segments (B) without reinforcing plate
9.6.3 Adjust the equalizer*
9.6.4 Adjusting the upper fingers*
9.6.5 Replace the blade section
9.6.6 Replacing short double fingers
9.6.7 Replace split double fingers
9.7 Ground guidance
9.7.1 Cleaning the skates
9.7.2 Adjust the pad relief
9.7.3 Adjust cross arm relief
9.7.4 Replacing the wear pads
9.7.5 Replace the traction strap
Adjust the traction strap
9.7.6 Replacing the traction strap
Adjust the traction strap
10 Decommissioning and disposal
10.1 General instructions
10.1.1 Decommissioning and disposal
11 Declaration of conformity
11.1 Front tool
11.1.1 Declaration of conformity for CE