Claas C900-C600 Mega Medion Do-Vx (701) Combines Operator Manual FR

File List:

00 0290 001 1.pdf

00 0290 001 1.pdf:

Contents
1 Introduction
1.1 General advice
1.1.1 Use of the instructions
1.1.2 Validity of the notice
1.1.3 Technical information
1.2 Nameplates and identification numbers
1.2.1 Spare parts and technical questions
1.2.2 Nameplate
3 Safety Tips
3.1 General advice
3.1.1 Important
3.1.2 General safety and accident prevention regulations
3.1.3 Use in accordance with instructions
3.1.4 Clearly non-compliant use
3.1.5 Precautionary measures
3.2 General security measures
3.2.1 Place the safety support in the supply channel
3.2.2 Remove the safety support from the supply channel
3.2.3 Install the cutter bar protection strip
3.2.4 Compressed air and water
3.2.5 Hydraulic fluid poses a risk of injury
3.2.6 Burn prevention
3.2.7 Oil
3.2.8 Fire and explosion prevention
3.2.9 Pipes, tubes and hoses
3.2.10 Before any commissioning
3.2.11 Commissioning the machine
3.2.12 Traveling on public roads
3.2.13 Park the machine
3.2.14 First aid measures
3.2.15 Decommissioning and disposal
3.3 Safety information
3.3.1 Marking of warnings and dangers
3.4 Warning pictograms
3.4.1 General information on warning pictograms
3.4.2 Workouts
3.4.3 Attached parts / machine casing
4 Technical characteristics
4.1 C900-C300 – TYPE 701/702/703
4.1.1 Authorized machines
4.1.2 Dimensions
4.1.3 Weight
4.1.4 Absorption of material
4.1.5 Power supply unit
4.1.6 Cutting device
4.1.7 Safety devices
5 Before first commissioning
5.1 General advice
5.1.1 General safety advice
5.1.2 Checklist for initial commissioning
5.2 Harvest feeding
5.2.1 Remove the transport safety device from the reel
5.2.2 Divider
5.2.3 Install the divider (long/short)
5.2.4 Install the divider (special)
6 Before each commissioning
6.1 General advice
6.1.1 General safety advice
6.1.2 Commissioning checklist
6.2 Power unit
6.2.1 Check the adjustment of the scraper profiles
7 Mount/dismount the front tool
7.1 General advice
7.1.1 General safety advice
7.2 Install the front tool
7.2.1 Install the crutches
7.2.2 Hanging the front tool
7.2.3 Lock the front tool
7.2.4 Install the cardan shaft
7.2.5 Connect the hydraulic system
7.2.6 Connect the electrical circuit (additional equipment)
7.3 Remove the front tool
7.3.1 Disconnect the electrical circuit (additional equipment)
7.3.2 Disconnect the hydraulic system
7.3.3 Dismantle the cardan shaft
7.3.4 Unlock the front tool
7.3.5 Unhook the front tool
7.3.6 Remove the stands
8 Setting for work
8.1 General advice
8.1.1 General safety advice
8.2 Cutting device
8.2.1 Install the corn lifters (optional equipment)
8.2.2 Remove the corn lifters (optional equipment)
8.2.3 Adjust the skates
9.1 General advice
9.1.1 General safety advice
9.2 General order
9.2.1 Before work in the field
9.2.2 Control harvest harvest
9.3 Harvest feeding
9.3.1 Adjust the reel fingers
9.3.2 Adjust the divider
9.4 Power supply unit
9.4.1 Adjusting the profile scraper
9.4.2 Adjust the position of the feed screw
9.4.3 Adjusting the feed screw fingers
9.4.4 Install the auger plate extensions
9.4.5 Remove the extensions from the auger plate
10 Incidents and remedy
10.1 General advice
10.1.1 General safety advice
10.2 General incidents and remedies
10.2.1 The harvested fruit is not taken
10.2.2 The cutter bar is not parallel to the ground
10.2.3 The flow of product coming from the cutting deck is irregular
10.2.4 Low harvest or rolling of the crop
10.2.5 The endless screw stops
10.2.6 Cutting height
10.2.7 Blade Problems
10.2.8 The blade stops
10.2.9 Material wraps around the reel
10.2.10 Reel fingers touch cutter bar
10.2.11 The reel is not parallel to the cutter bar
10.2.12 The reel stops
10.2.13 The reel does not turn
10.2.14 Foreign bodies on the tip of the dividers
10.3 Hydraulics
10.3.1 Bleed the air in the reel hydraulic cylinders.
10.4 Harvest feeding
10.4.1 Adjust the reel height
11 Maintenance
11.1 General advice
11.1.1 General safety advice
11.2 General maintenance information
11.2.1 Fixing material
11.2.2 Post-harvest maintenance work
11.2.3 Tightening torque for metric adjustment thread
11.2.4 Tightening torques for fine metric threads
11.2.5 Tightening torques for hydraulic connections with cutting ring DIN 3861
11.2.6 Tightening torques for hydraulic connections and air conditioning connections with bicone ring and O-ring DIN 3865
11.2.7 Tightening torques for plastic fittings
11.3 Maintenance table
11.3.1 Maintenance frequencies
11.4 Lubricant table
11.4.1 Lubricants
11.5 Gearbox / Clutch
11.5.1 Check the oil level in the knife drive gearbox
11.5.2 Fill the knife drive gearbox with oil
11.5.3 Drain the knife drive gearbox of oil
11.6 Workouts
11.6.1 Remove the reel drive belt
11.6.2 Install the reel drive belt
11.6.3 Remove the blade drive belt
11.6.4 Install the blade drive belt
11.6.5 Adjusting the blade drive belt
11.6.6 Adjusting the feed auger drive chain
11.6.7 Tighten the reel drive chain
11.6.8 Check chain tension
11.7 Cutting device
11.7.1 Replace the blade
11.7.2 Adjust the blade clamps
12 Lubrication plan
12.1 General advice
12.1.1 General safety advice
12.2 Lubrication points
12.2.1 Lubrication frequency
12.2.2 Lubrication points – 10 o’clock left side
12.2.3 Lubrication points – 100 h left side
12.2.4 Lubrication points – 100 h right side
12.2.5 Lubrication points – 250 h left side
Alphabetical index