Claas Scorpion 736 (K32) Telehandlers Operator Manual EN

File List:

00 0288 993 7.pdf
00 0288 997 2.pdf
00 0301 051 0.pdf
00 0302 629 2.pdf
00 0302 633 3.pdf
00 0302 765 3.pdf
00 0303 482 0.pdf

00 0288 993 7.pdf:

SCORPION 1033 VARIPOWERSCORPION 741 VARIPOWERSCORPION 736 VARIPOWERSCORPION 732 VARIPOWERSCORPION 635 VARIPOWER
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance notes
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Importance of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Requirements for all persons working with the machine
2.2.4 Children in danger
2.2.5 Hazard areas
2.2.6 Persons riding on the machine
2.2.7 Hitching the machine to the working attachment
2.2.8 Hitching the machine to the trailer
2.2.9 Structural alterations
2.2.10 Optional equipment and spare parts
2.2.11 Roll-over protective structure and falling object protective structure
2.2.12 Control of the machine while it is running
2.2.13 Operation only following proper putting into operation
2.2.14 Technical condition
2.2.15 Danger from damage to the machine
2.2.16 Respecting technical limit values
2.2.17 Keeping safety devices functional
2.2.18 Personal protective equipment
2.2.19 Wearing suitable clothing
2.2.20 Removing dirt and loose objects
2.2.21 Field of view and viewing aids
2.2.22 Preparing the machine for road travel
2.2.23 Hazards when driving on the road and on the field
2.2.24 Towing or salvaging the machine
2.2.25 Lifted loads
2.2.26 Solid ground
2.2.27 Parking the machine safely
2.2.28 Unsuitable operating utilities
2.2.29 Safe handling of operating and auxiliary utilities
2.2.30 Fuel is harmful to your health
2.2.31 Refrigerant is harmful to your health
2.2.32 Environmental protection and disposal
2.2.33 Keeping the cab free of chemicals
2.2.34 Avoiding fires
2.2.35 Potentially fatal electric shock from electric overhead lines
2.2.36 Behaviour in case of voltage flashover from overhead lines and of lightning strikes
2.2.37 Electrocution by electrical system
2.2.38 Oscillations may damage your health
2.2.39 Pressurised fluids
2.2.40 Toxic exhaust gas
2.2.41 Hot surfaces
2.2.42 Accessing and leaving the machine safely
2.2.43 Working on machine only after shutting it down
2.2.44 Maintenance operations and repair work
2.2.45 Danger from welding work
2.2.46 Checking and charging the battery
2.3 Safety marking
2.3.1 Structure of safety decals
2.3.2 Overview of warning signs
SCORPION 1033
SCORPION 741 / 736 / 732 / 635
2.3.3 Warning signs on the machine
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
* safety decal
safety decal
safety decal
3 Machine description
3.1 Overview and method of operation
3.1.1 Overview of telehandler
SCORPION 1033
SCORPION 741 / 736 / 732 / 635
3.2 Identification plates and identification numbers
3.2.1 Identification plate of telescopic loader
3.2.2 EC approval
3.2.3 Cab identification plate
3.3 Information on the machine
3.3.1 Position of decals
SCORPION 1033
SCORPION 741 / 736 / 732 / 635
3.3.2 Decals
Lashing point
Slinging point, lifting point
Rescue point
Switching position*
Windscreen washer liquid
Sound power level
Emergency exit
Ground speed
Urea solution
Hydraulic oil
Tank nozzle
Wheel nuts
Lubrication chart
Pre-heating device 230 V*
Tyre pressure table
Brake fluid
Lifting capacity curve
Control lever
Slow speed device and hand throttle*
Rear hydraulics*
Work lights*
Maximum tongue load*
Manual lubrication points*
High Flow*
Front socket*
Pre-heating device 120 V*
Maximum load-carrying capacity*
Refrigerant*
4 Operating and display elements
4.1 Cab and operator’s platform
4.1.1 Operator’s platform
4.1.2 Front controls
4.1.3 Controls in the side console
4.1.4 Controls in the right-side roof console
4.1.5 Controls in the left-side roof console
4.1.6 Heater and air conditioner controls
4.1.7 Control lever
4.1.8 Control stalk
4.1.9 Ignition lock
4.1.10 Display unit on the steering column
4.1.11 Load moment indicator
4.1.12 Level indicator
4.1.13 Compressed air brake system pressure gauge*
4.1.14 Radio
4.1.15 Arm rest
4.1.16 Controls on the telescopic arm
4.2 On-board information system
4.2.1 Warnings and fault messages
4.2.2 3.5 display unit
menu
menu
4.2.3 7 display unit*
menu
menu
4.2.4 Status symbols in the display unit
5 Technical specifications
5.1 SCORPION
5.1.1 Dimensions of SCORPION 1033
5.1.2 Dimensions of SCORPION 741
5.1.3 Dimensions of SCORPION 736
5.1.4 Dimensions of SCORPION 732
5.1.5 Dimensions of SCORPION 635
5.1.6 Weight
5.1.7 Load-carrying capacity
5.1.8 Explanations regarding the lifting capacity curve
Symbols on the lifting capacity curves
5.1.9 SCORPION 1033 lifting capacity curve
5.1.10 SCORPION 741 lifting capacity curve
5.1.11 SCORPION 736 lifting capacity curve
5.1.12 SCORPION 732 lifting capacity curve
5.1.13 SCORPION 635 lifting capacity curve
5.1.14 Static and dynamic testing
5.1.15 Vertical loads
Calculation of ground pressure
Calculation example for front wheels on solid ground
Calculation example for front wheels on loose ground
Calculation example for rear wheels on solid ground
Calculation example for rear wheels on loose ground
Support area on solid ground
Support area on loose ground
Support area with support
Calculation example of front tyres with support
5.1.16 Vibrations
Hand/arm vibrations
Whole-body vibrations
5.1.17 Sound pressure level and sound power level
5.1.18 Temperature of use
5.1.19 Diesel engine TCD 3.6 L4
5.1.20 TCD 3.6 L4 (D914) diesel engine
5.1.21 CO2 emissions of diesel engine
5.1.22 Chassis
Ground drive
Ground speed
5.1.23 Axles
Front axle
Rear axle
5.1.24 Working attachments
5.1.25 Tyres and tyre pressure
5.1.26 Snow chains* or guard chains*
5.1.27 Foam-filled tyres*
5.1.28 Brake
5.1.29 Steering
5.1.30 Telescopic arm
5.1.31 Trailer hitch
Registration as an agricultural or forestry tractor
Registration as self-propelled working machine
5.1.32 Electric system
5.1.33 Hydraulic system
Working hydraulics
5.1.34 Restrictions of field of view in SCORPION 1033
Restriction of field of view with load hitched
Restriction of field of view with a load
Restriction of field of view for lorry loading
5.1.35 Restrictions of field of view in SCORPION 741 / 736 / 732
Restriction of field of view with load hitched
Restriction of field of view with a load
Restriction of field of view for lorry loading
5.1.36 Restrictions of field of view in SCORPION 635
Restriction of field of view with load hitched
Restriction of field of view with a load
Restriction of field of view for lorry loading
5.1.37 Stability during operation
Conditions for lifting operation
Conditions for transport operation
5.1.38 Stability during operation with lift eye*
Conditions for lifting operation
Conditions for transport operation
5.2 Operating utilities
5.2.1 Lubricants
5.2.2 Hydraulic oil
5.2.3 Brake fluid
5.2.4 Coolant
5.2.5 Fuels
5.2.6 Refrigerant
5.2.7 Windscreen washer liquid
6 Machine preparation
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.1.2 Lowering the working attachment to the ground
6.1.3 Switching the battery isolating switch
6.1.4 Securing the machine against rolling away
6.1.5 Folding open and folding up the folding wheel chocks*
6.1.6 Stopping the ground drive with the EMERGENCY OFF switch
6.1.7 Engaging the parking position
6.2 Accessing workplaces and maintenance spaces
6.2.1 Accessing and leaving the cab
Accessing and leaving
Accessing the cab
Leaving the cab
6.3 Diesel engine
6.3.1 Selecting the permitted fuel
6.3.2 Observing the fuel specification
6.3.3 Observing the urea specification
Use of the urea solution
Purity and standard of urea solution
Storage of urea solution in tanks and containers
Properties of urea solution at high and low outside temperatures
6.3.4 Using winter fuel at low temperatures
6.3.5 Refuelling the machine
Refuelling fuel
Topping up urea solution
6.4 Implement
6.4.1 Removing the working attachment
6.4.2 Relieving the pressure in the hydraulic system
Relieving the hydraulic pressure in control circuit III
Pressure relief* of control circuit III / control circuit III High Flow*
Relieving the hydraulic pressure in control circuit IV*
6.4.3 Disconnecting the hydraulic lines of control circuit III
Disconnecting the connections of control circuit III
Disconnecting the connections of control circuit III change-over*
Disconnecting the leakage oil connection*
6.4.4 Disconnecting the hydraulic lines of control circuit III High Flow*
6.4.5 Disconnecting the multi-coupler*
6.4.6 Disconnecting the front socket*
6.4.7 Removing the working attachment from the mechanical implement carrier*
6.4.8 Removing the working attachment from the hydraulic implement carrier*
6.4.9 Installing the working attachment
6.4.10 Installing the working attachment on the mechanical implement carrier*
6.4.11 Installing the working attachment on the hydraulic implement carrier*
6.4.12 Connecting the hydraulic lines of control circuit III
Aligning the connections of hydraulic lines
Connecting the connections of control circuit III
Connecting the connections of control circuit III change-over*
Connecting the leakage oil connection*
6.4.13 Connecting the hydraulic lines of control circuit III High Flow*
6.4.14 Connecting the multi-coupler*
6.4.15 Connecting the front socket*
6.4.16 Checking the working attachment lock
Visual inspection
Mechanical check
6.4.17 Connecting the hydraulic lines of control circuit IV*
Connecting the connections of control circuit IV
6.4.18 Disconnecting the hydraulic lines of control circuit IV*
6.4.19 Connecting the rear socket*
6.5 Hitch
6.5.1 Connecting a trailer with a tipper function*
6.5.2 Disconnecting a trailer with a tipper function*
6.6 Loading the machine
6.6.1 Preparing the machine for loading
6.6.2 Loading the machine
6.6.3 Lashing down the machine
6.6.4 Driving the machine on a loading space
6.6.5 Driving the machine from a loading space
7 Operation
7.1 Driving and transportation
7.1.1 Preparing for driving operation
7.1.2 Preparing road travel
7.1.3 Carry out a function check
7.1.4 Driving
Starting off the machine
7.1.5 Moving the working attachment to transport position
7.1.6 Pick up and unload the material
7.1.7 Levelling
Forward levelling
Backwards levelling
7.1.8 Loading a transport vehicle
7.1.9 Picking up a load from the ground
7.1.10 Picking up a load from an elevated point
7.1.11 Putting the load down on the ground
7.1.12 Putting down a load at an elevated point
7.1.13 Towing the machine from the hazard area
Towing points and salvaging points
Preparing the machine for towing
Towing the machine
After towing
7.1.14 Loading cycle counter*
Counting the loading cycles
Resetting the loading cycle counter
7.2 Diesel engine
7.2.1 Starting the diesel engine
Synchronizing the steering
Warming up the hydraulic oil to operating temperature
7.2.2 Switching off the diesel engine
7.2.3 Pre-heating device for hydraulic oil and coolant (230 / 120 V)*
Activating pre-heating
Deactivating pre-heating
7.2.4 Fuel pre-heating device (12 V)*
7.3 Chassis
7.3.1 Selecting the direction of travel
7.3.2 Selecting the driving range
7.3.3 Slow speed device*
7.3.4 Level compensation*
7.3.5 Vibration damping*
7.3.6 Hand throttle*
7.3.7 Opening and closing the ground drive pump high-pressure valves
7.4 Brake
7.4.1 Braking the machine
7.4.2 Applying and releasing the parking brake
7.4.3 Releasing and applying the parking brake mechanically
Releasing the parking brake
Applying the parking brake
7.5 Steering
7.5.1 Setting the steering mode
Setting front wheel steering
Setting 4-wheel steering
Setting crab steering
Setting manual crab steering without lock key
Setting manual crab steering with lock key
Correcting the rear axle steering angle
7.6 Implement
7.6.1 Preparing working with the working attachment
7.6.2 Blocking and releasing the working hydraulics
7.6.3 Function of load moment indicator
7.6.4 Checking the load moment indicator
7.6.5 Raising and lowering the telescopic arm
Raising the telescopic arm
Lowering the telescopic arm
7.6.6 Extending and retracting the telescopic boom
Extending the telescopic boom
Retracting the telescopic boom
7.6.7 Tipping the working attachment out and in
Tipping in the working attachment
Tipping out the working attachment
7.6.8 Automatic bucket return*
7.6.9 Control circuit III
Operating control circuit III
Setting the flow rate*
Changing over control circuit III*
7.6.10 Control circuit III High Flow*
Operating the control circuit III High Flow
Setting the flow rate*
7.6.11 Control circuit IV*
Operating control circuit IV
Setting the flow rate*
7.6.12 Tipping cylinder lock*
7.6.13 Emergency lowering*
Activating emergency lowering
7.7 Hitch
7.7.1 Overview of trailer hitches
7.7.2 Operating the automatic trailer hitch
Adjusting the trailer hitch height
Hitching the trailer
Unhitching the trailer
7.7.3 Operating the Piton trailer hitch
Adjusting the trailer hitch height
Hitching the trailer
Unhitching the trailer
7.7.4 Operating the ball-type hitch
Adjusting the trailer hitch height
Adjusting the hold-down clip height
Hitching the trailer
Unhitching the trailer
7.7.5 Operating the Cuna trailer hitch
Adjusting the trailer hitch height
Hitching the trailer
Unhitching the trailer
7.7.6 Operating the manoeuvring hitch
Hitching the trailer
Unhitching the trailer
7.7.7 Operating the automatic pin-type hitch
Hitching the trailer
Unhitching the trailer
7.7.8 Operating the pin-type hitch
Hitching the trailer
Unhitching the trailer
7.7.9 Operating the hitch hook
Adjusting the trailer hitch
Hitching the trailer
Unhitching the trailer
Adjusting the trailer hitch
Hitching the trailer
Unhitching the trailer
7.7.10 Connecting the compressed-air brake system*
7.7.11 Operating the compressed-air brake system*
7.7.12 Switching the antifreeze pump for the compressed-air brake system* on and off
7.7.13 Connecting the hydraulic trailer brake*
1-line system*
Connecting the brake hose
Removing the brake hose
2-line system*
Connecting the brake hose
Removing the brake hose
7.7.14 Operating the hydraulic trailer brake*
7.7.15 Operating a trailer with tipper function
Raising and lowering the tipper
Raising and lowering the tipper
7.8 Electric and electronic system
7.8.1 Electronic immobiliser*
Programming the ignition key
Deleting an ignition key
7.8.2 Camera system*
Adjusting the side view camera*
Correcting the angle
Adjusting the rear view camera*
Correcting the angle
7.8.3 Reversing warning system
Reversing horn
7.8.4 Setting the warning beacon*
Switching the warning beacon on and off
Removing the warning beacon
Folding down the warning beacon*
7.8.5 Switching the side light on and off
7.9 Cab and operator’s platform
7.9.1 Opening the emergency exit
7.9.2 Adjusting the driver’s seat
7.9.3 Applying the seat belt
7.9.4 Adjusting the steering column
Adjusting the distance of the steering wheel
Adjusting the steering wheel height
Adjusting the steering wheel inclination
7.9.5 Adjusting heater, ventilation and air conditioner*
Setting the temperature
Setting the fan
Switching the air conditioner* on and off
7.9.6 Opening and closing the cab window
Open the upper cab door section a little
Opening the upper part of the cab door by 180°
Opening the rear cab window
7.9.7 Adjusting the roll-up sun screen*
7.9.8 Switching the cab interior lighting on and off
7.9.9 Adjusting the viewing aids
Overview
Adjusting the internal mirror
Adjusting the right side view mirror and the rear view mirror
Adjusting the left side view mirror and rear view mirror
Adjusting the front viewing aid*
Adjusting the rear viewing aid*
7.9.10 Actuating the windscreen washer system
Actuating the windscreen washer system
Actuating the rear windscreen washer system
7.9.11 Removing the front protection*
7.10 Central lubrication system
7.10.1 Central lubrication system*
8 Faults and remedies
8.1 Overview
8.1.1 Resetting the maintenance indicator
8.1.2 Overview of fault codes
8.1.3 Overview of fault codes
8.2 Diesel engine
8.2.1 Overview of diesel engine faults
8.2.2 Overview of faults on air filter system
8.2.3 Overview of exhaust treatment system faults
Warning and malfunction strategies
Symbols of urea tank
Exhaust gas treatment system symbols
Diesel particulate filter* symbols
Override output reduction
8.3 Brake
8.3.1 Overview of faults on the brake system
8.4 Steering
8.4.1 Overview of faults on the steering system
8.5 Implement
8.5.1 Overview of faults on the working attachment
8.6 Hydraulic system
8.6.1 Overview of faults on the hydraulic system
8.7 Electric and electronic system
8.7.1 Jump-start process
Connecting the external battery
Disconnecting the external battery
8.7.2 Overview of faults on the electric system
8.7.3 Overview of faults on electronic immobilizer*
8.7.4 Fuses in engine compartment
8.7.5 Fuses in the cab
8.7.6 Relays in engine compartment
8.7.7 Relays in the cab
8.7.8 Preparing welding work
8.8 Cab and operator’s platform
8.8.1 Overview of faults on the heating system
Heating output
Cooling capacity
8.9 Central lubrication system
8.9.1 Overview of faults on the central lubrication system*
9 Maintenance
9.1 Preparing maintenance
9.1.1 Moving the machine to the maintenance position
9.1.2 Applying the safety lock*
9.1.3 Opening and closing the engine bonnet
9.2 Maintenance intervals
9.2.1 Every 10 operating hours or daily
9.2.2 Every 50 operating hours
9.2.3 After the first 100 operating hours
9.2.4 Every 250 operating hours
9.2.5 After the first 500 operating hours
9.2.6 Every 500 operating hours
9.2.7 Every 1000 operating hours
9.2.8 Every 1500 operating hours
9.2.9 Every 2 years
9.2.10 Every 2000 operating hours
9.2.11 Every 3000 operating hours
9.2.12 Every 4000 operating hours
9.2.13 Every 6000 operating hours
9.2.14 Every 10000 operating hours
9.3 Lubrication plan
9.3.1 Lubricating the lubrication points every 50 operating hours
Central lubrication points*
Hitch hook* and lift eye*
9.3.2 Grease points, grease every 250 operating hours
9.4 Diesel engine
9.4.1 Cleaning the diesel engine
9.4.2 Difficulty factors for
9.4.3 Checking the diesel engine oil level (TCD 3.6 L4 / TCD 3.6 L4 (D914))
Checking the oil level
Topping up oil
9.4.4 Draining condensed water from the fuel prefilter (TCD 3.6 L4)
9.4.5 Draining condensed water from the fuel prefilter (TCD 3.6 L4 (D914))
9.4.6 Draining condensed water and sediments from the fuel tank
9.4.7 Bleeding the fuel system (TCD 3.6 L4 / TCD 3.6 L4 (D914))
9.4.8 Cleaning the cooling system (TCD 3.6 L4 / TCD 3.6 L4 (D914))
9.4.9 Adjusting the reversing fan*
9.4.10 Checking the coolant level (TCD 3.6 L4 / TCD 3.6 L4 (D914))
Checking the filling level
Topping up coolant
9.4.11 Cleaning or changing the air filter elements (TCD 3.6 L4 (D914))
Removing the filter element
Cleaning the filter housing and the lid
Replacing the safety element
Installing the filter element
9.4.12 Cleaning or replacing air filter elements (TCD 4.1 L4 / TCD 3.6 L4)
Removing the filter element
Cleaning the filter element
Cleaning the filter housing and the lid
Replacing the safety element
Installing the filter element
9.4.13 Cleaning the air filter dust discharge valve (TCD 3.6 L4 (D914))
Cleaning the dust discharge valve
Checking the dust discharge*
9.4.14 Cleaning the air filter dust discharge valve (TCD 4.1 L4 / TCD 3.6 L4)
Cleaning the lid
Cleaning the dust discharge valve
9.4.15 Regenerating the exhaust aftertreatment system
Automatic regeneration
Starting regeneration manually
Cancelling regeneration
Regenerating the diesel particulate filter*
9.5 Chassis
9.5.1 Checking the wheels, tyres and the tyre pressure
9.5.2 Checking the tyre pressure
9.5.3 Checking the tightening torque of wheel nuts
9.6 Brake
9.6.1 Checking the function and effect of the service brake
9.6.2 Checking the function and effect of the parking brake
9.6.3 Checking the service brake fluid level
Topping up brake fluid
9.6.4 Dewatering the compressed air reservoir of the compressed air brake*
9.7 Steering
9.7.1 Checking the steering system function
9.8 Telescopic arm
9.8.1 Greasing the sliding faces on the telescopic boom
9.8.2 Greasing the rear sliding elements
9.8.3 Checking the front sliding elements
9.8.4 Preserving the connecting rods
9.9 Hydraulic system
9.9.1 Checking the hydraulic oil level
Checking the filling level
Topping up hydraulic oil
9.9.2 Checking the hydraulic hoses
Marking of hydraulic hoses
9.10 Electric and electronic system
9.10.1 Checking the lighting
9.10.2 Checking the load moment limitation function
Preparing the machine
Checking the load moment limitation with the standard fork
Checking the load moment limitation with a special fork
9.11 Cab and operator’s platform
9.11.1 Checking the condition and function of the seat belt
9.11.2 Cleaning or replacing the cab air pre-filter*
9.11.3 Checking the filling level in the windscreen washer system
9.12 Central lubrication system
9.12.1 Checking the grease level in the central lubrication system*
Checking the filling level
Topping up grease
9.13 Assembled parts/Machine housing
9.13.1 Cleaning the machine
Prior to cleaning
Cleaning
After cleaning
9.13.2 Checking the fire extinguishers
10 Putting out of operation and disposal
10.1 General information
10.1.1 Removal from service and disposal
11 EC declaration of conformity
11.1 SCORPION
11.1.1 EC declaration of conformity (sample)

00 0288 997 2.pdf:

SCORPION 1033 TRENDSCORPION 741 TRENDSCORPION 736 TRENDSCORPION 732 TRENDSCORPION 635 TREND
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance notes
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Importance of Operator’s Manual
2.2.2 Observe the safety decals and warnings
2.2.3 Requirements for all persons working with the machine
2.2.4 Children in danger
2.2.5 Hazard areas
2.2.6 Persons riding on the machine
2.2.7 Hitching the machine to the working attachment
2.2.8 Hitching the machine to the trailer
2.2.9 Structural changes
2.2.10 Optional equipment and spare parts
2.2.11 Roll-over protective structure and falling object protective structure
2.2.12 Control of the machine while it is running
2.2.13 Operation only following proper putting into operation
2.2.14 Technical condition
2.2.15 Danger from damage to the machine
2.2.16 Respecting technical limit values
2.2.17 Keeping the safety devices functional
2.2.18 Personal protective equipment
2.2.19 Wearing suitable clothing
2.2.20 Removing dirt and loose objects
2.2.21 Field of view and viewing aids
2.2.22 Preparing the machine for road travel
2.2.23 Hazards when driving on the road and on the field
2.2.24 Towing or salvaging the machine
2.2.25 Lifted loads
2.2.26 Solid ground
2.2.27 Parking the machine safely
2.2.28 Unsuitable operating utilities
2.2.29 Safe handling of operating and auxiliary utilities
2.2.30 Fuel is harmful to your health
2.2.31 Refrigerant is harmful to your health
2.2.32 Environmental protection and disposal
2.2.33 Keep the cab free of chemicals
2.2.34 Fire hazard
2.2.35 Potentially fatal electric shock from electric overhead lines
2.2.36 Behaviour in case of voltage flashover from overhead lines and of lightning strikes
2.2.37 Electrocution by electrical system
2.2.38 Oscillations may damage your health
2.2.39 Pressurised fluids
2.2.40 Toxic exhaust gas
2.2.41 Hot surfaces
2.2.42 Accessing and leaving the machine safely
2.2.43 Working on machine only after shutting it down
2.2.44 Maintenance operations and repair work
2.2.45 Danger from welding work
2.2.46 Checking and charging the battery
2.3 Safety marking
2.3.1 Layout of safety decals
2.3.2 Overview of warning signs
SCORPION 1033
SCORPION 741 / 736 / 732 / 635
2.3.3 Warning signs on the machine
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
safety decal
3 Machine description
3.1 Overview and method of operation
3.1.1 Overview of telehandler
SCORPION 1033
SCORPION 741 / 736 / 732 / 635
3.2 Identification plates and identification numbers
3.2.1 Identification plate of telescopic loader
3.2.2 EC approval
3.3 Information on the machine
3.3.1 Position of decals
SCORPION 1033
SCORPION 741 / 736 / 732 / 635
3.3.2 Decals
Lashing point
Slinging point, lifting point
Rescue point
Windscreen washer liquid
Sound power level
Emergency exit
Ground speed
Urea solution
Hydraulic oil
Tank nozzle
Checking the fastening of wheels
Lubrication chart
Pre-heating device 230 V*
Tyre pressure table
Brake fluid
Lifting capacity curve
Control lever
Hand throttle*
Steering types
Work lights*
Maximum vertical load*
Slow speed device
Manual lubrication points*
4 Operating and display elements
4.1 Cab and operator’s platform
4.1.1 Operator’s platform
4.1.2 Front controls
4.1.3 Controls in the side console
4.1.4 Controls in the right-side roof console
4.1.5 Controls in the left-side roof console
4.1.6 Heater and air conditioner controls
4.1.7 Control lever
4.1.8 Control stalk
4.1.9 Ignition lock
4.1.10 Display unit on the steering column
4.1.11 Load moment indicator
4.1.12 Level indicator
4.1.13 Compressed air brake system pressure gauge*
4.1.14 Arm rest
4.1.15 Controls on the telescopic arm
4.2 On-board information system
4.2.1 Warnings and fault messages
4.2.2 Display unit
4.2.3 Display
4.2.4 menu
4.2.5 menu
4.2.6 menu
4.2.7 display
5 Technical specifications
5.1 SCORPION
5.1.1 Dimensions of SCORPION 1033
5.1.2 Dimensions of SCORPION 741
5.1.3 Dimensions of SCORPION 736
5.1.4 Dimensions of SCORPION 732
5.1.5 Dimensions of SCORPION 635
5.1.6 Weight
5.1.7 Load-carrying capacity
5.1.8 SCORPION 1033 lifting capacity curve
5.1.9 SCORPION 741 lifting capacity curve
5.1.10 SCORPION 736 lifting capacity curve
5.1.11 SCORPION 732 lifting capacity curve
5.1.12 SCORPION 635 lifting capacity curve
5.1.13 Explanations regarding the lifting capacity curve
Symbols on the lifting capacity curves
5.1.14 Static and dynamic testing
5.1.15 Vertical loads
Calculation of ground pressure
Example calculation for front wheels on solid ground
Example calculation for front wheels on loose ground
Example calculation for rear wheels on solid ground
Example calculation for rear wheels on loose ground
Support area on solid ground
Support area on loose ground
Support area with support
Example calculation for front wheels with support (50 cm x 50 cm)
5.1.16 Vibrations
Hand/arm vibrations
Whole-body vibrations
5.1.17 Sound pressure level and sound power level
5.1.18 Temperature of use
5.1.19 Diesel engine TCD 3.6 L4
5.1.20 CO2 emissions of diesel engine
5.1.21 Chassis
Ground drive
5.1.22 Axles
Front axle
Rear axle
5.1.23 Tyres and tyre pressure
5.1.24 Snow chains* or guard chains*
5.1.25 Foam-filled tyres*
5.1.26 Brake
5.1.27 Steering
5.1.28 Telescopic arm
5.1.29 Trailer hitch
Registration as an agricultural or forestry tractor
Registration as self-propelled working machine
5.1.30 Electric system
5.1.31 Hydraulic system
Working hydraulics
5.1.32 Restrictions of field of view in SCORPION 1033
Restriction of field of view with load hitched
Restriction of field of view with a load
Restriction of field of view for lorry loading
5.1.33 Restrictions of field of view in SCORPION 741 / 736 / 732
Restriction of field of view with load hitched
Restriction of field of view with a load
Restriction of field of view for lorry loading
5.1.34 Restrictions of field of view in SCORPION 635
Restriction of field of view with load hitched
Restriction of field of view with a load
Restriction of field of view for lorry loading
5.1.35 Stability
Conditions for lifting operation
Conditions for tran