Claas Maxflo 1200 (538) Combines Operator Manual ES

File List:

00 0297 292 1.pdf
00 0301 548 4.pdf

00 0297 292 1.pdf:

VARIO 1250 / 1050MAXFLEX 1250 / 1050MAXFLO 1250 / 1050C900 – C450V900 – V540
1. Introduction
1.1 Information on the instruction manual
1.1.1 Validity of the manual
1.1.2 Information on the instruction manual
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Instruction manual and other sources of information
Meaning of the instruction manual
2.2.2 Invisible laser beam of 1M laser category
2.2.3 Proper machine application
3 Technical data
3.1 LASER PILOT
3.1.1 LASER PILOT
4 Management
4.1 Address
4.1.1 Deploy the LASER PILOT
4.1.2 Adjust the LASER PILOT
Preparing the terrain
Adjust the LASER PILOT to the harvesting material
Adjust the LASER PILOT to the harvesting material
Prepare the adjustment process
Check the LASER PILOT setting
Vertically adjust the LASER PILOT
Control the horizontal preset of the LASER PILOT
Perform horizontal fine adjustment of the LASER PILOT
5 Incident and solution
5.1 Incident summary
5.1.1 LASER PILOT

00 0301 548 4.pdf:

MAXFLO 1200MAXFLO 1050MAXFLO 900MAXFLO 750
1. Introduction
1.1 Information regarding the instruction manual
1.1.1 Validity of the manual
1.1.2 Information about this instruction manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Maintenance information
1.1.7 Information regarding warranty
1.1.8 Spare parts and technical questions
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Reasonably foreseeable misuse
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Meaning of the instruction manual
2.2.2 Observe graphic danger symbols and alarm indications
2.2.3 Requirements for all people working with the machine
2.2.4 Danger zones
2.2.5 Stay between the machine and the head
2.2.6 Attach the header or transport trailer to the machine
2.2.7 Risk of injury due to rotating shafts
2.2.8 Construction changes
2.2.9 Optional equipment and spare parts
2.2.10 Use only after correct start-up
2.2.11 Technical status
2.2.12 Danger due to damage to the machine
2.2.13 Keep safety devices operational
2.2.14 Personal protective equipment
2.2.15 Wear appropriate clothing
2.2.16 Remove dirt and loose objects
2.2.17 Prepare the machine for road traffic
2.2.18 Unsuitable consumables
2.2.19 Safe handling of consumables and auxiliary materials
2.2.20 Environmental protection and waste disposal
2.2.21 Electrical shock from electrical equipment
2.2.22 Liquids under pressure
2.2.23 Work only on the stopped machine
2.2.24 Maintenance work and repair work
2.2.25 Lifted machine parts and loads
2.2.26 Danger from welding work
2.3 Safety instructions on the machine
2.3.1 Structure of graphic hazard symbols
2.3.2 Graphic danger symbols on the head
3 Machine Description
3.1 Summary and operation
3.1.1 MAXFLO Summary
3.1.2 Operating mode
3.2 Optional machine equipment
3.2.1 External reel tines
3.2.2 Additional feeding augers
3.3 Identification plates and identification numbers
3.3.1 Head identification plate
3.4 Machine information
3.4.1 Adhesives
4 Control and display instruments
4.1 Hydraulic installation
4.1.1 Indicator elements
5 Technical data
5.1 MAXFLO
5.1.1 Eligible machines
5.1.2 Dimensions
5.1.3 Weights
5.1.4 Windlass
5.1.5 Power supply unit
5.1.6 Lubricants
5.1.7 Hydraulic oil
6 Preparation of the machine
6.1 Turn off the machine and secure it
6.1.1 Turn off the machine and secure it
6.2 Perform before commissioning
6.2.1 Perform before first start-up
6.3 Load the head
6.3.1 Load and tie down the head
6.4 Assemble the head
6.4.1 Assemble the head
6.4.2 Prepare the bolting
6.4.3 Identify hydraulic oil
6.4.4 Hanging the head
6.4.5 Locking the head
6.4.6 Assemble the cardan shaft
6.4.7 Installing the multiple coupling
6.4.8 Adjust the stabilizer wheels to the working position
6.5 Disassemble the head
6.5.1 Disassemble the head
6.5.2 Dismantling the multiple coupling
6.5.3 Dismantle articulated shaft
6.5.4 Unlock the head
6.5.5 Unhook the head
6.5.6 Adjust the stabilizer wheels to the transport position
6.6 Hydraulic installation
6.6.1 Remove the transport lock from the hydraulic oil tank
6.6.2 Fill the hydraulic installation of the stabilizer wheels
6.7 Address
6.7.1 Assemble LASER PILOT*
6.8 Harvest harvest
6.8.1 Place the safety supports of the windlass
6.8.2 Remove the safety supports from the reel
6.8.3 Convert the header to row placement
Remove the feed auger
Move the conveyor belt
6.8.4 Convert the header to row placement
6.8.5 Transform the header to threshing
6.9 Mowing device
6.9.1 Installing the switch for the left rapeseed separator blade*
6.9.2 Install the cutter bar protection device
7 Management
7.1 Safety measures for handling
7.1.1 Avoid collision with the cabin roof
7.2 Driving the machine
7.2.1 Prepare the field trip
7.2.2 Prepare for road traffic
7.3 Work application
7.3.1 Before work
7.3.2 Control the collection of harvest material
7.4 Rapeseed harvest
7.4.1 Assemble rapeseed equipment*
7.4.2 Dismantling the rapeseed equipment*
7.5 Address
7.5.1 Deploy LASER PILOT*
7.6 Harvest harvest
7.6.1 Adjust the reel tines
7.6.2 Assemble the crop divider rod
7.6.3 Assemble the rice divider
7.7 Power unit
7.7.1 Adjust the position of the feeding auger
7.7.2 Adjust the feed auger fingers
7.7.3 Modify the speed of the feeding auger
7.7.4 Invert the head
MAXFLO reverse the direction of movement of the conveyor belt
7.7.5 Adjust the speed of the conveyor belts
7.8 Mowing device
7.8.1 Connecting the rapeseed separator blade
7.8.2 Assemble the crop lifter*
7.8.3 Dismantle the crop lifter*
7.8.4 Adjust the skates
Inner skates
Outdoor skates
8 Incident and solution
8.1 Head
8.1.1 Improve flow
8.1.2 Harvest harvest
8.1.3 Feed auger
8.1.4 Mowing device
8.1.5 Ground guidance
8.2 Hydraulic installation
8.2.1 Bleed the reel hydraulic cylinders
8.3 Harvest harvest
8.3.1 Carry out the basic adjustment of the height of the reel
8.3.2 Change the reel tines
8.3.3 Adjust the reel speed sensor
8.4 Power supply unit
8.4.1 Change feed auger fingers
8.4.2 Change the conveyor belt
9 Maintenance
9.1 Summary of maintenance intervals
9.1.1 Before starting the harvest
9.1.2 After the first 50 hours of service
9.1.3 After the first 100 hours of service
9.1.4 Every 50 hours of service
9.1.5 Every 100 hours of service
9.1.6 Every 250 hours of service
9.1.7 Every 500 hours of service or annually
9.1.8 After harvest
9.1.9 Preserve the head
9.2 Greasing scheme
9.2.1 Grease the lubrication points every 100 hours of service
9.2.2 Grease the lubrication points every 250 hours of service
9.3 Transmission, clutch and cardan shaft
9.3.1 Gear summary
9.3.2 Check the bevel gear oil level (G1)
9.3.3 Change the bevel gear oil (G1)
Drain oil
Fill oil
9.3.4 Check the oil level of the bevel spur gear (G2)
9.3.5 Change the oil of the bevel spur gear (G2)
Drain oil
Fill oil
9.3.6 Check the bevel gear oil level (G3)
9.3.7 Change bevel gear oil (G3)
Drain oil
Fill oil
9.3.8 Check the spur gear oil level (G4)
9.3.9 Change spur gear oil (G4)
Drain oil
Fill oil
9.4 Drives
9.4.1 Adjust Reel Drive Chain
9.5 Hydraulic installation
9.5.1 Check the hydraulic oil level
9.5.2 Change hydraulic oil
Drain hydraulic oil
Fill hydraulic oil
9.5.3 Change the hydraulic tank return filter
9.6 Power supply unit
9.6.1 Adjust the tension of the conveyor belts
9.7 Mowing device
9.7.1 Change blades
9.7.2 Adjust the blade guides
Check the low blade guide
Check the wear plate
Check the wear of the upper blade guide
Check the high blade guide
9.7.3 Control the pusher
9.7.4 Change the blade section
9.7.5 Replacing double fingers
9.7.6 Align double fingers
10 Decommissioning and waste disposal
10.1 Decommissioning and waste disposal
10.1.1 Decommissioning and waste disposal
11 EC declaration of conformity
11.1 MAXFLO
11.1.1 EC declaration of conformity