File List:
00 0291 572 4.pdf
00 0294 905 2.pdf
00 0295 130 1.pdf
00 0303 768 3.pdf
00 0291 572 4.pdf:
VARIANT 360VARIANT 365VARIANT 380VARIANT 385
Introduction
General indications
Machine summary
CCN Explanation
CCN (CLAAS Component Number)
General indications
Electrical regulations
Hydraulic regulations
CCN (CLAAS Component Number)
09 Hydraulic
0920 Valves
Main valve block
Rotor Clutch Shutoff Valve (6027)
Function Description
Roto Cut electromagnetic valve, blades REMOVE – PUT IN / open – close the cutting bottom
Function Description
Conveyor bottom valve block
Function Description
Roto Cut solenoid valve, blades REMOVE – PUT IN
Function Description
0980 Hydraulic connection diagram
Global connection diagram of the hydraulic system
Global connection diagram of the hydraulic system up to machine no. 75203628 / 75103242
Global connection diagram of the hydraulic system starting from machine no. 75203629 / 75103243
Function Description
10 Install. electrical/electronic
1010 Central electrical system
Summary – modules
1012 Modules / sensors
Occupancy of the A020 CCU 16 plus modules
Denominations
Occupation of modules A019 UBM
VARIANT A019 module (UBM) plug X1
VARIANT A019 module (UBM) plug X2
Occupation of the A099 UBM modules
A099 expansion module (UBM) socket X1
A099 expansion module (UBM) socket X2
1080 Electronic connection diagram
Structure of the electrical installation documentation
Connection diagram
Connection List
CLAAS regulations:
Communicator cable variants
Function Description
SCM 01a Main voltage supply (CCU 16 plus module) and Communicator (II)
Table of measured values
Function Description
Occupation of the sockets
Connection List
CM 01b Main voltage supply (UBM module) and Communicator (II)
Taof measured values
Function Description
Occupation of the sockets
Connection List
SCM 01c Main voltage supply (UBM module) and CMT terminal
Table of measured values
Function Description
Occupation of the sockets
Connection List
SCM 06a CAN-Bus, power supply of the modules (CCU 16 plus module) and Communicator (II)
Packer without preparation product moisture sensor
Function Description
Occupation of the sockets
Connection List
SCM 06b CAN-Bus, power supply of the modules (CCU 16 plus module) and Communicator (II)
Packing machine with product moisture sensor preparation
Function Description
Occupation of the sockets
Connection List
SCM 06c CAN-Bus, voltage supply of the modules (UBM module) and Communicator (II)
Function Description
Occupation of the sockets
Connection List
SCM 06d CAN-Bus, module voltage supply (UBM module) and CMT terminal
Function Description
Occupation of the sockets
Connection List
SCM 07a ROTOCUT (CCU 16 plus module) and oscillating cutting floor
Table of measured values
Function Description
Cutting bottom position sensor (B067)
Sensor adjustment function description (B067)
Occupation of the sockets
Connection List
SCM 07b ROTOCUT (UBM modules) and oscillating cutting floor up to machine no. 75202328 / 75101996
Table of measured values
Function Description
Cutting bottom position sensor (B067)
Sensor adjustment function description (B067)
Occupation of the sockets
Connection List
SCM 07c ROTOCUT (UBM modules) and oscillating cutting floor from machine no. 75202329 / 75101997
Table of measured values
Function Description
Cutting bottom position sensor (B067)
Sensor adjustment function description (B067)
Occupation of the sockets
Connection List
SCM 07d ROTOCUT (UBM module) without oscillating cutting bottom
Table of measured values
Function Description
Occupation of the sockets
Connection List
SCM 07e ROTOFEED (UBM modules) and oscillating cutting floor up to machine no. 75202328 / 75101996
Table of measured values
Function Description
Cutting bottom position sensor (B067)
Sensor adjustment function description (B067)
Occupation of the sockets
Connection List
SCM 07f ROTOFEED (UBM modules) and oscillating cutting floor from machine no. 75202329 / 75101997
Table of measured values
Function Description
Cutting bottom position sensor (B067)
Sensor adjustment function description (B067)
Occupation of the sockets
Connection List
SCM 10a Baling pressure regulation (CCU 16+, up to machine no. 75202328 / 75101996)
Table of measured values
Function Description
Z017 and Y050 configuration
Occupation of the sockets
Connection List
SCM 10b Baling pressure regulation (CCU 16+, from machine no. 75202329 / 75101997)
Table of measured values
Function Description
Z017 and Y050 configuration
Automatic increase of baling pressure from software no.
CDS Adjustment of the baling pressure adjustment factors K1 – K4 from software no.
Extended setting menu with CCU and Communicator from software no.
Occupation of the sockets
Connection List
SCM 10c Regulation of baling pressure (UBM module) up to machine no. 75202328 / 75101996
Table of measured values
Function Description
Z017 and Y050 configuration
Occupation of the sockets
Connection List
SCM 10d Regulation of baling pressure (UBM module) from machine no. 75202329 / 75101997
Table of measured values
Function Description
Z017 and Y050 configuration
Automatic increase of baling pressure from software no.
CDS Adjustment of the baling pressure adjustment factors K1 – K4 from software no.
Occupation of the sockets
Connection List
SCM 11a Tying trigger (CCU 16 plus module) and comfort tying with (Z006)
Table of measured values
Function Description
Occupation of the sockets
Connection List
Mesh tying process diagram:
Diagram of the thread tying process
SCM 11b Tying trigger (CCU 16 plus module) and comfort tying with (B128)
Table of measured values
Function Description
Occupation of the sockets
Connection List
Mesh tying process diagram:
Diagram of the thread tying process
SCM 11c Tying trigger (UBM module) standard tying with (Z006)
Table of measured values
Function Description
Occupation of the sockets
Connection List
Mesh tying process diagram:
Diagram of the thread tying process
SCM 11d Tying trigger (UBM module) standard tying with (B128)
Table of measured values
Function Description
Occupation of the sockets
Connection List
Mesh tying process diagram:
Diagram of the thread tying process
SCM 26a Machine control (CCU 16 plus module)
Table of measured values
Function Description
SCM 26b Machine control (UBM module)
Table of measured values
Function Description
SCM 27a Operating instructions (CCU 16 plus module) without product humidity sensor
Table of measured values
Function Description
Occupation of the sockets
Connection List
SCM 27b Operating instructions (CCU 16 plus module) with product humidity sensor
Table of measured values
Function Description
Occupation of the sockets
Connection List
SCM 27c Operating instructions (UBM module)
Table of measured values
Function Description
Occupation of the sockets
Connection List
SCM 32 Lighting
Function Description
Occupation of the sockets
Connection List
21 Power set
2125 Rotor
clutch rotor switch
Function Description
Location of components
Electrical installation
Component Grid
00 0294 905 2.pdf:
1. Introduction
Structure of the electrical installation documentation
Connection diagram
Connection List
CLAAS standardization:
2 Modules
Representation of the modules
Denominations
Module occupancy
Module A019 – VARIANT, socket X1
Module A019 – VARIANT, socket X2
Module A020 - CLAAS Control Unit (CCU)
3 Connection diagrams
01a Power supply to the main voltage system VARIANT 360/385 Comfort
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
01b Main voltage system supply VARIANT 360/385 Standard
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
06a CAN BUS, power ly for VARIANT 360 / 385 Comfort modules
Connection diagram (DIN A3)
Denominations
Function Description
Occupatio the sockets
Connection List
06b CAN BUS, voltage supply for VARIANT 360 / 385 Standard modules
Connection diagram (DIN A3)
Denominations
Function Description
Occupation of the sockets
Connection List
07a Rotocut VARIANT 360 / 385 Comfort
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
07b Rotocut VARIANT 360 / 385 Standard
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
10a Pressing pressure regulation VARIANT 360 / 385 Comfort
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
10b Pressing pressure regulation VARIANT 360 / 385 Standard
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
11a Triggering of the VARIANT 360 / 385 Comfort tying
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
Mesh tied process diagram:
Thread tying process diagram
11b Triggering of the VARIANT 360 / 385 Standard bundle
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
Mesh tied process diagram:
Thread tying process diagram
Linen Tying Process Diagram
26a VARIANT 360 / 385 Comfort machine control
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
26b VARIANT 360 / 385 Standard machine control
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
27a VARIANT 360 / 385 Comfort operating indicators
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
27b Operating indicators VARIANT 360 / 385 Standard
Connection diagram (DIN A3)
Denominations
Table of measured values
Function Description
Occupation of the sockets
Connection List
32a VARIANT 360 / 385 Lighting
Connection diagram (DIN A3)
Denominations
Function Description
Occupation of the sockets
Connection List
Alphabetical index
00 0295 130 1.pdf:
1 Global hydraulic system
Hydraulic connection diagram
Global wiring diagram
Denominations
Function Description
2 Hydraulic operating system
Main valve block
Denominations
Rotor clutch shut-off valve
Denominations
Function Description
clutch rotor switch
Denominations
Function Description
Rotocut blade electromagnetic valve DISCONNECT – CONNECT
Denominations
Function Description
3 Location of components
Global wiring diagram
Pressure filter, shut-off valve, main valve block I
Global wiring diagram
Wiring diagram of the hydraulic system, rotor clutch, flat belt drive clutch
Global wiring diagram
Valve block check valves, tensioning arms
Global wiring diagram
Alphabetical index
00 0303 768 3.pdf:
VARIANT 450VARIANT 460VARIANT 465VARIANT 470VARIANT 480VARIANT 485
Introduction
General indications
CCN Explanation
General indications
Electrical regulations
Hydraulic regulations
CCN (CLAAS Component Number)
09 Hydraulics
0920 Valves
Main valve block
Table of measured values
ROTOCUT valve block and folding cutting bottom
Table of measured values
ROTOCUT valve block without folding cutting bottom
Conveyor bottom valve block
0980 Hydraulic connection diagram
Hydraulic connection diagram
Without folding cutting bottom
With folding cutting bottom
10 Install. electrical/electronic
1005 Power supply
Main voltage supply via ISOBUS socket
Table of measured values
Function Description
Main voltage supply via 12V socket
Table of measured values
Function Description
1012 Modules / sensors
Module occupancy
1040 Performance Measurement
Stem humidity sensor
Table of measured values
Function Description
1080 Electronic connection diagram
Introduction of connection diagrams
Summary of denominations
Name of CLAAS cables
Power supply
Actuator system
sensory system
Communication
Standards
Electrical installation connection diagrams
SCM00a: Retrofit kit on the tractor for power supply via ISOBUS socket
SCM00b: Cable Y tractor – baler
SCM01: Main power supply, CAN-Bus and diagnostics without ISOBUS connection
SCM100: Main power supply, CAN-Bus and diagnostics with ISOBUS connection
SCM02: Base module with baling pressure adjustment, tying trigger, twine tying and load indicator in the baling chamber
SCM101: Expansion module with central lubrication, comfort mesh tying and stem humidity sensor
SCM105: Cutting device/conveyor device
SCM04a: Standard lighting
SCM04b: USA Lighting
SCM130: Work lighting
1081 Plug summary
Socket database (chp CLAAS)
Example of key number representation (CHP)
Key number (CHP)
Plug Representation (CHP)
1085 Networks
CAN-BUS with ISOBUS
Table of measured values
Function Description
CAN-BUS without ISOBUS
Table of measured values
Function Description
21 Power set
2125 Rotor
Cutting device with folding cutting bottom (RC Pro)
Table of measured values
Function Description
Adjustment
Bottomless cutting device for folding cutting (RC)
Table of measured values
Function Description
Conveyor device with pivoting conveyor bottom (RF)
Table of measured values
Function Description
45 Pressing device
4500 Crimping device
Regulation of baling pressure and tailgate actuation
Table of measured values
Function Description
Graphic: Schematic representation of baling pressure adjustment
CDS adjustment of baling pressure setting factors K1 – K4
46 Tying system
4610 Thread tying
thread tying
Table of measured values
Function Description
Diagram of the thread tying process
4615 Mesh tying / plastic tape tying
mesh tying
Table of measured values
Function Description
Standard mesh tied process diagram
Comfort mesh tying process diagram
75 Central lubrication
7505 Container, pump
Electric central lubrication system
Table of measured values
Function Description
7515 Lubrication/piping equipment
Central lubrication system, VARIANT grease distribution
Chain lubrication
Function Description
Verification
92 Diagnosis
9210 Machine Error Codes
FMI error codes
General indications
FMI 00 (signal too large)
FMI 01 (signal too small)
IMF 02 (implausible signal)
FMI 03 (voltage too high)
FMI 04 (voltage too low)
FMI 05 (current too low)
FMI 06 (current too high)
FMI 07 (mechanical failure)
FMI 08 (frequency signal defective)
IMF 09 (communication failure)
FMI 10 (signal change too fast)
IMF 11 (multiple failure)
FMI 12 (defective ECU)
FMI 13 (signal outside calibration range)
IMF 16 (non-existent parameter)
FMI 17 (ECU not responding)
FMI 18 (power supply failure)
FMI 19 (software requirements not met)
IMF 95 (no signal change)
FMI 96 (CAN-Bus system defective)
IMF 97 (implausible state)
IMF 98 (warning)
IMF 99 (Info)
List of machine fault codes (DTC)
DTC (Diagnostic Trouble Code) Summary
Location of components
Hydraulic installation
1000 Oil tank / oil filter / oil radiator
3000 Hydraulic Cylinders
5000 Pressure retainers
6000 Valves – mechanically actuated (hydraulic installation)
7000 Valves – hydraulically actuated
Electrical installation
To Terminal/modules
B Sensors
and lighting
K Relays
M Motor (electric)
R Potentiometers/resistors
S Switch/button – cabin operation
V Electronic part
X Pluggable connections
and electromagnetic coil
Z Actual value switch
Claas Technical System PDF
Claas QUANTUM 5500 S S16 S18 4500 S (614) Loader Wagons Technical System DE
Claas Technical System PDF
Claas Technical System PDF
Claas Technical System PDF