Claas Pick Up 380-300 (I35) Forage Harvesters Operator Manual EN

File List:

00 0295 870 5.pdf
00 0301 051 0.pdf
00 0303 482 0.pdf

00 0295 870 5.pdf:

PICK UP 380PICK UP 300
Table of contents
1 To this Operator’s Manual
1.1 Notes on the manual
1.1.1 General instructions
1.1.2 Using this manual
Directional indicators
1.1.3 Validity of the manual
1.1.4 Symbols and notes
1.1.5 Technical specifications
2 Safety
2.1 Safety regulations
2.1.1 Of special importance
2.1.2 Qualification of drivers and maintenance personnel
2.1.3 Intended use
2.1.4 Reasonably foreseeable misuse
2.1.5 Safety and accident prevention regulations
2.1.6 First aid measures
2.1.7 Danger of injury from hydraulic liquid
2.2 Warning signs
2.2.1 Labelling of warning signs
2.3 Safety decals
2.3.1 Safety decals
2.3.2 Positioning on the machine
3 Machine description
3.1 Overview and method of operation
3.1.1 PICK UP 380 overview
3.1.2 PICK UP 300 overview
3.1.3 Mode of operation of the PICK UP 380/300
3.2 Optional machine equipment
3.2.1 Main manual gearbox
3.2.2 Hydraulic auger lift
3.2.3 Installation kit for JAGUAR Type 492
3.2.4 Tension springs
3.2.5 Feeler wheel, centre
3.2.6 Hydraulic feeler wheels
3.2.7 Intake paddle extension
3.2.8 Wear plates
3.3 Identification plates and vehicle identification number
3.3.1 Spare parts and technical questions
3.3.2 Machine identification plate
3.3.3 Position of identification number
3.3.4 Explanation of machine identification plate
4 Operating and control elements
4.1 Gearbox
4.1.1 Main manual gearbox*
4.2 Fitting frame
4.2.1 Lever locking device
4.2.2 Pendulum frame lock
5 Technical specifications
5.1 PICK UP 380
5.1.1 Compatible machines
5.1.2 Dimensions
5.1.3 Weights
5.1.4 Tyre dimension
5.1.5 Tyre pressure
5.1.6 Noise level
5.1.7 Lubricants
5.2 PICK UP 300
5.2.1 Compatible machines
5.2.2 Compatible machines
5.2.3 Dimensions
5.2.4 Weights
5.2.5 Tyres
5.2.6 Tyre pressure
5.2.7 Noise level
5.2.8 Lubricants
6 Machine preparation
6.1 Assembling the front attachment
6.1.1 Overview of the scope of supply
6.1.2 Attaching feeler wheels
6.1.3 Attaching the roller crop press
6.1.4 Removing the transport frame
6.2 Mounting front attachment
6.2.1 Switching off and securing machine
6.2.2 Secure the front attachment when raised
6.2.3 Open the locking device
6.2.4 Coupling the front attachment
6.2.5 Closing the locking device
6.2.6 Adjusting the locking device
6.2.7 Adjusting the locking bar
6.2.8 Raising the stands
Left stand
Right stand
6.2.9 Connecting the hydraulic hose lines
6.2.10 Connecting the power supply
6.3 Adjusting the front attachment
6.3.1 Checking the dog clutch
6.3.2 Adjusting the dog clutch
Adjusting the height and inclination
Correcting the lateral setting
6.3.3 Attach the working position sticker
6.4 Removing front attachment
6.4.1 Extending the stands
Left stand
Right stand
6.4.2 Disconnecting the hydraulic hose lines
6.4.3 Disconnecting the power supply
6.4.4 Locking the pendulum frame
6.4.5 Open the locking device
6.4.6 Unhitching the front attachment
6.5 Prepare road travel
6.5.1 Folding the dust net down
6.5.2 Locking the pendulum frame
6.5.3 Fold the feeler wheels mechanically to the transport position
6.5.4 Fold the feeler wheels hydraulically* to the transport position
6.6 Prepare field work
6.6.1 Folding the dust net upwards
6.6.2 Unlocking the pendulum frame
6.6.3 Folding feeler wheels mechanically to working position
6.6.4 Swinging the feeler wheels hydraulically* to the working position
6.7 Loading the front attachment
6.7.1 Raising the front attachment
7 Operation
7.1 General safety precautions
7.1.1 Please note before operation
7.2 Driving on the road
7.2.1 General warnings
7.2.2 Driving on public roads
7.3 Fieldwork settings
7.3.1 Adjusting the working height
7.3.2 Adjust the cutting height control on the forage harvester
7.3.3 Adjusting the speed of the intake auger
Select the sprocket pairing for the main gearbox
Selecting the sprocket pairing for the manual main gearbox
7.3.4 Fitting/removing sprockets
7.3.5 Adjusting the length of cut
7.4 Fieldwork
7.4.1 Inserting the front attachment
7.4.2 Raising / lowering the front attachment
7.4.3 Raising / lowering the roller crop press
7.4.4 Engaging / disengaging the cutting height control
7.4.5 Engaging/disengaging the front attachment
Switching on the front attachment
Disengaging the front attachment
7.4.6 Reversing the front attachment
7.4.7 Observe the following during field driving
8 Faults and remedies
8.1 Causes and remedies
8.1.1 General warnings
8.1.2 Crop is not picked up
8.1.3 Flow of material from the front attachment is uneven
8.1.4 Poor chopping quality
9 Maintenance
9.1 Maintenance Information
9.1.1 General warnings
9.1.2 Electrical system
9.1.3 Protective guards
9.1.4 Spare parts
9.1.5 Unbalance
9.1.6 Compressed air and water
9.1.7 Wheels
9.1.8 Burn prevention
9.1.9 Oils
9.1.10 Fire prevention and explosion prevention
9.1.11 Lines, tubes and hoses
9.2 Overview maintenance intervals
9.2.1 Dealing with maintenance intervals
9.2.2 Before the harvest
9.2.3 After the first 10 operating hours
9.2.4 Every 50 operating hours
9.2.5 Every 100 operating hours
9.2.6 Every 250 operating hours
9.2.7 Every 500 operating hours or annually
9.2.8 As required
9.2.9 After the harvest
9.3 Maintenance operations in general
9.3.1 Cleaning the front attachment
9.3.2 Applying preservative to the front attachment
9.3.3 Securing material
9.4 Gearbox
9.4.1 Drive diagram
9.4.2 Check gearbox tightness
9.4.3 Input gearbox: Check the oil level
9.4.4 Input gearbox: Changing the oil
9.4.5 Input gearbox: Clean the breather valve
9.4.6 Intake auger main gearbox: Checking the oil level
9.4.7 Intake auger main gearbox: Changing the oil
9.4.8 Intake auger main gearbox: Cleaning the breather valve
9.4.9 Intake auger manual main gearbox*: Check the oil level
9.4.10 Intake auger manual main gearbox*: Changing the oil
9.4.11 Intake auger manual main gearbox*: Cleaning the breather valve
9.4.12 Pick-up main gearbox: Checking the oil level
9.4.13 Pick-up main gearbox: Changing the oil
9.4.14 Pick-up main gearbox: Clean the breather valve
9.5 Clutch
9.5.1 Checking the overload clutch
9.5.2 Checking the friction discs
9.6 Universal drive shaft
9.6.1 Maintaining drive shafts
9.6.2 Universal drive shaft for the input gearbox – having the main gearbox serviced
9.7 Hydraulic system
9.7.1 Hydraulic system maintenance
9.7.2 Check the hydraulic hoses
9.8 Crop feeding
9.8.1 Checking the tyre air pressure
9.9 Feeder unit
9.9.1 Tensioning the drive chains
9.9.2 Tensioning the drive chain for the intake auger
9.9.3 Tensioning the drive chain for the pick-up
9.10 Various components / Machine body
9.10.1 Adjusting the pendulum frame tension spring
9.11 Lubrication chart
9.11.1 Lubrication points – 50 h
9.11.2 Lubrication points – 100 h
9.11.3 Lubrication points – 250 h
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 EC declaration of conformity
11.1 PICK UP 380 / 300
11.1.1 EC Declaration of Conformity
12 Technical terms and abbreviations
12.1 Terms and explanations
12.1.1 Technical terms
12.1.2 Abbreviations

00 0301 051 0.pdf:

PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 0303 482 0.pdf:

PROFI CAM 4
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Structural changes
2.2.3 Optional equipment and spare parts
2.2.4 Operation only following proper putting into operation
2.2.5 Technical status
2.2.6 Respecting technical limit values
Respecting technical limit values
2.2.7 Hazards when driving on roads and fields
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Identification plates
3.3 Information on the product
3.3.1 CE marking
4 Operating and display elements
4.1 Camera system
4.1.1 Camera system monitor
4.1.2 CEBIS
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electric and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Putting out of operation and disposal
10.1 General information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms