File List:
00 0290 143 2.pdf
00 0292 437 0.pdf
00 0298 664 0.pdf
00 0298 794 1.pdf
00 0300 374 1.pdf
00 1325 214 4.pdf
00 0298 664 0.pdf:
Umbauanleitung
Lüfter mit Drehzahlreduzierung
1 Instructions
Instructions
2 Inhalt
3 Allgemeine Hinweise
Besons on the beach
Kennzeichnung von Warn- und Gefahrenhinweisen
Bestimmungsgemäße Verwendung
4 Lieferumfang
Lieferumfang
Umrüstsatz 349 332.0
Drehzahlreduzierung für Lüfter Umbauen
Anbau vorbereiten
Lüfter ausbauen
Unterdruck im Hydrauliköltank erzeugen
Lüfter zerlegen
Lüfter zusammenbauen
Hydraulikpumpe auswechseln
Lüfter einbauen
Probelauf vorbereiten und durchführen
Conversion Instructions
Reduced Speed Fan
1 Introduction
Introduction
2 Contents
3 General information
Important
Identifica and da Correct use
4 Shipping Package
Shipping Package
Conversion kit 349 332.0
5 Conversion
Conversing the reduced speed fan
Preparing the installation
Removing the fan
Creating vacuum in the hydraulic oil tank
Disassembling the fan
Assembling the fan
Exchanging the hydraulic pump
Installing the fan
Preparing and performing the test run
Editing Instructions
Fan with reduction in rotation speed
1 Introduction
Introduction
2 Content
3 General tips
Important
Identification of warning and hazard requirements
Use in accordance with intended use
4 pieces supplied
Parts supplied
Modification set 349 332.0
5 Modification
Modification of the reduction of the rotation speed for fan
Prepare the assembly
Disassemble the fan
Generate a vacuum in the hydraulic oil tank
Disassemble the fan
Assemble the fan
Replace the hydraulic pump
Fan mounting
Prepare and carry out a test run
00 0298 794 1.pdf:
Anbauanleitung
Reversierantrieb für Lüfter
1 Einleitung
Einleitung
2 Inhalt
3 Allgemeine Hinweise
Besonders zu beachten
Kennzeichnung von Warn- und Gefahrenhinweisen
Bestimmungsgemäße Verwendung
4 Lieferumfang
Lieferumfang
Nachrüstsatz 311 108.1
Reversierantrieb für Lüfter anbauen
Anbau vorbereiten
Hydraulikmotor und zugehörige Schlauchleitungen abbauen
Hydraulikmotor (1) zum Anbauen vorbereiten
Reversierventil (4) vormontieren und anbauen
Leckölleitung drehen
Schlauchleitungen verlegen und Hydraulikmotor (1) anbauen
Kabelsatz (14) verlegen und anschließen
Kiemenblech (17) vormontieren und anbauen
Probelauf vorbereiten und durchführen
Fitting Instructions
Reverse 1 Introduction
IntroducContents
Contents
3 General information
Important
Identification of warnings and danger signs
Correct use
4 Shipping Package
Shipping Package
Supplementary kit 311 108.1
5 Fittings
Fitting the reverse fan drive
Preparing the fitting
Removing the hydraulic motor and the associated hose lines
Preparing the hydraulic motor (1) for mounting
Pre-assembling and fitting the reversing valve (4)
Turning the leakage oil line
Routing the hose lines and fitting the hydraulic motor (1)
Routing and connecting the wiring loom (14)
Pre-assembling and fitting the louvered plate (17)
Preparing and performing the test run
Assembly notice
Reverse control for ventilation
1 Introduction
Introduction
2 Contents
Contents
3 General advice
Important
Identification of prescriptions concerning warnings and dangers
Usage compliant with prior employment regulations
4 Pièces fournies
Pièces fournies
Jeu d’équipement supplémentaire 311 108.1
5 Montages
Assembly of the reversal control for the fan
Prepare the montage
Place the hydraulic motor and the corresponding flexible conduits
Preparation of the hydraulic motor (1) for assembly
Preparation and installation of the inversion vanne (4)
Deviation from the flight route
Installation of flexible conduits and assembly of hydraulic motor (1)
Pose and branching of cables (14)
Pre-assembly and assembly of the air vent (17)
Prepare and make an arthouse brand
Assembly instructions
Fan inverter
1. Introduction
Introduction
2 Contents
3 General instructions
Important warning
Warning and danger sign
Specific use
4 Total supply
Total supply
Overall update 311 108.1
5 Assembly
Installing the faverter
Preparation for assembly
Diembly of the hydraulic motor and its flexible pipes
Preparation for mounting the hydraulic motor (1)
Pre-assembly and assembly of the reversing valve (4)
Rotate the leakage oil pipe
Laying hoses and mounting the hydraulic motor (1)
Laying and connecting the cable hank (14)
Pre-assembly and assembly of the ventilation plate (17)
Preparation and execution of the operational test.
Assembly instructions
Equipment for reversing the fan
1 Introduction
Introduction
2 Contents
Contained
3 General indications
Important note
Reporting of warnings and warnings
Appropriate application of the machine
4 pieces served
Piezas supplied
Reequipment game 311 108.1
5 Assembly
Assemble the equipment to reverse the fan operation
Prepare the assembly
Disassemble the hydraulic motor and the related flexible tubes
Prepare the hydraulic motor (1) to mount it
Install and fit the reverse valve (4)
Turn the escape oil tube
Place the flexible tubes and mount the hydraulic motor (1)
Place and connect the cable shaft (14)
Pre-assemble and assemble the rejillas chapa (17)
Prepare and carry out the main operation
Claas Assembly Instruction PDF
Claas Assembly Instruction PDF
Claas LEXION 570 MONTANA (581) Combine Assembly Instruction DE
Claas Assembly Instruction PDF
Claas Assembly Instruction PDF
Claas LEXION 750 MONTANA (C51) Combine Assembly Instruction DE
Claas Assembly Instruction PDF
Claas Assembly Instruction PDF
Claas Assembly Instruction PDF
Claas Assembly Instruction PDF
![](https://automanual.net/wp-content/uploads/2024/04/claas-targo-k70-k50-512-telehandlers-assembly-instruction-en-1.jpg)