Claas Corio 890-670 C Conspeed (H09) Combines Operator Manual ES

File List:

00 0305 667 5.pdf

00 0305 667 5.pdf:

1. Introduction
1.1 General information
1.1.1 Validity of the manual
1.1.2 Information relating to this instruction manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Maintenance instructions
1.1.7 Information regarding warranty
1.1.8 Spare parts and technical questions
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable misuse
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Meaning of the instruction manual
2.2.2 Observe graphic danger symbols and alarm indications
2.2.3 Requirements for all people working with the machine
2.2.4 Danger zones
2.2.5 Position yourself between the machine and the head
2.2.6 Accompanying persons
2.2.7 Attach the machine to a header or transport trailer
2.2.8 Risk of injury due to rotating shafts
2.2.9 Construction modifications
2.2.10 Optional equipment and spare parts
2.2.11 Use only after correct commissioning
2.2.12 Technical status
2.2.13 Danger due to machine breakdowns
2.2.14 Maintain functional protection devices
2.2.15 Personal protective equipment
2.2.16 Wear appropriate clothing
2.2.17 Remove dirt and loose objects
2.2.18 Prepare the machine for road traffic
2.2.19 Unsuitable consumables
2.2.20 Safe handling of consumables and auxiliary materials
2.2.21 Environmental protection and waste disposal
2.2.22 Electrical shock from electrical equipment
2.2.23 Liquids under pressure
2.2.24 Work only on the stopped machine
2.2.25 Maintenance work and repair work
2.2.26 Machine parts and lifted loads
2.2.27 Danger from welding work
2.3 Safety instructions on the machine
2.3.1 Structure of graphic hazard symbols
2.3.2 Position of warning symbols
3 Machine Description
3.1 Summary and operation
3.1.1 Summary of CORIO CONSPEED
3.1.2 Boot Device Summary
3.1.3 CORIO CONSPEED operating mode
3.1.4 Clutch against overload of starting gears
3.2 Identification plates and identification numbers
3.2.1 Identification plate of corn milking head
3.3 Optional machine equipment
3.3.1 Pairs of main gear pinions
3.3.2 Gear wheel to increase the speed of the feed auger
3.3.3 Bedknife and separating rubber
3.3.4 Lying corn auger
3.3.5 Raising the hood
3.3.6 Stubble bender
3.3.7 High cob harvesting rubber
3.3.8 Protective bar
3.3.9 AUTO CONTOUR
3.3.10 AUTOPILOT
3.3.11 MONTANA Kit
3.3.12 Protection against winding
3.3.13 Splash protection
3.3.14 Kit for sunflowers
4 Control and display instruments
4.1 Head
4.1.1 Control elements
5 Technical data
5.1 CORIO CONSPEED
5.1.1 Dimensions
5.1.2 Weight
5.1.3 Lubricants
6 Preparation of the machine
6.1 Turn off the machine and secure it
6.1.1 Turn off the machine and secure it
6.2 Perform before commissioning
6.2.1 Perform before first start-up
6.2.2 Assembling the switch *
6.3 Assemble the head
6.3.1 Assemble and adjust the stubble bender*
Assemble stubble bender
Adjust the stubble bender
Adjust working position
Adjust transport position
Adjust the stubble bender
Adjust working position
Adjust transport position
6.3.2 Assemble sliding skids
6.3.3 Mount female socket* for the protective bar
6.3.4 Assemble the bedknife and separating rubber*
Assemble bedknife
Install separator rubber
6.3.5 Prepare the assembly of the hood lift*
6.4 Load the head
6.4.1 Load and tie down the head
6.5 Assemble the head
6.5.1 Assemble the head
6.5.2 Adapt the machine
6.5.3 Select cardan shaft
6.5.4 Transform cardan shafts
Check the cardan shaft
Disassemble cardan shaft
Disassemble cardan shaft
Install the cardan shaft
Install the cardan shaft
6.5.5 Attach the head
6.5.6 Prepare the bolting
6.5.7 Locking the head
6.5.8 Installing the multiple coupling
6.5.9 Assemble the cardan shaft
6.5.10 Pick up the support legs
6.5.11 Learn the final stops of the hydraulic adjustment of the starting plates
6.6 Disassemble the head
6.6.1 Disassemble the head
6.6.2 Dismantling the multiple coupling
6.6.3 Disassemble cardan shaft
6.6.4 Unlock the head
6.6.5 Remove the support legs
6.6.6 Unhook the head
7 Management
7.1 Driving on the road
7.1.1 Prepare for road traffic
7.1.2 Fold the head into transport position
7.1.3 Mount the protective bar
Mount the protective bar to the folded hood
Mount the protective bar to the deployed hoods
7.1.4 Mount protective guards
7.2 Work application
7.2.1 Prepare the field trip
7.2.2 Remove the protection shields
7.2.3 Remove the protective bar
7.2.4 Deploy the head in working position
7.3 Power supply unit
7.3.1 Adjust the feeding speed
7.3.2 Modify the speed of the feeding auger
7.4 Milking device
7.4.1 Adjust the height of the canopy tip
7.4.2 Fold the top of the hood
Fold the inner hood tips
Fold the outer hood tips
7.4.3 Deploy the hood tips
Deploy the outer hood tips
Deploy the inner hood tips
7.4.4 Raise the hood in maintenance position
7.4.5 Fold down the hood
7.4.6 Disassemble and install the cob collection rubber*
Remove the cob collection rubber
Assemble the cob collection rubber
7.4.7 Adjust breakout plates hydraulically
7.4.8 Mechanically adjust the starter plates
7.4.9 Assembling and disassembling the hood lift*
Install hood lift
Remove hood lift
7.5 Chop
7.5.1 Engage the chopper blades
7.5.2 Disengage the chopper blades
8 Incident and solution
8.1 Head
8.1.1 Summary of head faults
9 Maintenance
9.1 Summary of maintenance intervals
9.1.1 Before starting the harvest
9.1.2 After the first 10 hours of service
9.1.3 After the first 50 hours of service
9.1.4 Every 10 hours of service
9.1.5 Every 50 hours of service
9.1.6 Every 100 hours of service
9.1.7 Every 250 hours of service
9.1.8 Every 500 hours of service or annually
9.1.9 After harvest
9.2 Greasing scheme
9.2.1 Lubricate lubrication points every 50 hours of service
9.2.2 Lubricate lubrication points every 100 hours of service
9.2.3 Lubricate lubrication points every 250 hours of service
9.3 Transmission, clutch and cardan shaft
9.3.1 Check the oil level of the main gears
9.3.2 Change the main gear oil
Drain oil
Fill oil
9.3.3 Check the bevel gear oil level
9.3.4 Change the bevel gear oil
Drain oil
Fill oil
9.3.5 Check the oil level of the starting gears
9.3.6 Change the starter gear oil
Drain oil
Fill oil
9.3.7 Check the starter gear overload clutches
9.3.8 Check the overload clutch of the feed auger drive
9.4 Drives
9.4.1 Adjust the drives
9.4.2 Adjust the chain (K01)
9.5 Milking device
9.5.1 Adjust the drip plates
9.5.2 Remove the starter plates
9.5.3 Mount starter plates
9.5.4 Check the starter roller blades*
9.5.5 Change the starter roller blades*
9.5.6 Clean the starter rollers
Remove the drain plates
Remove the starter screws
Fix the starter rollers
9.5.7 Adjust the feed chains
9.5.8 Change conveyor chains
Remove the covers
Remove the supports
Disassemble the conveyor chain
Assemble the conveyor chain
9.5.9 Change the wear edges of the hoods
9.5.10 Adjust the height of the hoods
9.6 Chop
9.6.1 Change the chopper blades
9.6.2 Check the chopper blades
9.6.3 Check the tightening torques of the chopping blades
9.6.4 Disassembly and assembly of knife holders
Remove knife holder
Assemble the knife holder
10 Decommissioning and waste disposal
10.1 General information
10.1.1 Decommissioning and waste disposal
11 Declaration of conformity
11.1 CORIO CONSPEED
11.1.1 EC declaration of conformity