Claas Disco 3150 Tctrc (F93) Mower Operator Manual ES

File List:

00 0301 627 3.pdf

00 0301 627 3.pdf:

1. Introduction
1.1 Information regarding the instruction manual
1.1.1 Validity of the manual
1.1.2 Information about this instruction manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Information regarding warranty
1.1.7 Spare parts and technical issues
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable inappropriate application
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Meaning of the instruction manual
2.2.2 Observe graphic danger symbols and alarm indications
2.2.3 Requirements for all people working with the machine
2.2.4 Children in danger
2.2.5 Danger zones
2.2.6 Position yourself between the tractor and the machine
2.2.7 Couple the tractor with the machine
2.2.8 Risk of injury due to rotating shafts
2.2.9 Construction modifications
2.2.10 Optional equipment and spare parts
2.2.11 Control of the machine in operation
2.2.12 Operation only after correct commissioning
2.2.13 Technical status
2.2.14 Danger due to machine breakdowns
2.2.15 Comply with technical limit values
2.2.16 Danger due to coasting parts
2.2.17 Maintain functional protection devices
2.2.18 Personal protective equipment
2.2.19 Wear appropriate clothing
2.2.20 Remove dirt and loose objects
2.2.21 Prepare the machine for road traffic
2.2.22 Dangers when driving on the road and in the countryside
2.2.23 Park the machine safely
2.2.24 Parking without supervision
2.2.25 Unsuitable consumables
2.2.26 Safe handling of consumables and auxiliary materials
2.2.27 Environmental protection and waste disposal
2.2.28 Fire protection
2.2.29 Deadly electrical discharge via overhead lines
2.2.30 Behavior in the case of an overhead line voltage transfer and lightning strike
2.2.31 Noise can have negative consequences for health
2.2.32 Liquids under pressure
2.2.33 Hot surfaces
2.2.34 Work only on the stopped machine
2.2.35 Maintenance work and repair work
2.2.36 Machine parts and lifted loads
2.2.37 Danger from welding work
2.3 Safety signage
2.3.1 Structure of graphic hazard symbols
2.3.2 Position of warning symbols on the machine
3 Machine Description
3.1 Summary and operation
3.1.1 Machine overview
3.1.2 General view of the direction of rotation of the mower discs
3.1.3 Operating mode of the DISCO 3150 TC / 3150 TC FLAPGROUPER
3.1.4 DISCO 3150 TRC operating mode
3.2 Optional equipment
3.2.1 High cut skates*
3.2.2 Double high cut skids*
3.2.3 Wear pads*
3.2.4 Bar protection*
3.2.5 Insertable fork for cardan shaft 8 components*
3.2.6 Insertable fork for cardan shaft 21 components*
3.2.7 Simple hydraulic connection parts*
3.2.8 Wide spread*
3.2.9 US lighting adapter*
3.2.10 Technical legal equipment European Union*
3.2.11 Legal technical equipment for Switzerland*
3.3 Identification plates and vehicle identification number
3.3.1 Machine identification plate
3.4 Machine information
3.4.1 Adhesive on the machine
4 Control and display instruments
4.1 Control elements
4.1.1 Support leg
4.1.2 Mower
4.1.3 Hydraulic hoses
4.1.4 Pull rope
5 Technical data
5.1 DISC 3150TC
5.1.1 Dimensions
5.1.2 Weights
5.1.3 Tractor requirements
5.1.4 Version
5.1.5 Tire pressure
5.1.6 Acoustic intensity level
5.1.7 Lubricants
5.2 DISC 3150 TRC
5.2.1 Dimensions
5.2.2 Weights
5.2.3 Tractor requirements
5.2.4 Version
5.2.5 Tire pressure
5.2.6 Acoustic intensity level
5.2.7 Lubricants
5.3 DISC 3150 TC FLAPGROUPER
5.3.1 Dimensions
5.3.2 Weights
5.3.3 Tractor requirements
5.3.4 Version
5.3.5 Tire pressure
5.3.6 Acoustic intensity level
5.3.7 Lubricants
6 Preparation of the machine
6.1 Turn off the machine and secure it
6.1.1 Shut down and secure the machine and tractor
6.2 Access jobs and maintenance positions
6.2.1 Open and close the protection device
Open the hood
Close the hood
6.2.2 Open the protective device of the belt drive
6.3 Adapt the tractor
6.3.1 Check the tractor power take-off protection device
6.4 Adapt the machine
6.4.1 Check the length of the cardan shaft
Shortest working position of the cardan shaft
Longest working position of the cardan shaft
6.4.2 Adapt the length of the cardan shaft
6.4.3 Mount the cardan shaft on the machine
6.4.4 Assemble double high cut skids*
6.4.5 Assemble high cut skates*
6.4.6 Removing the high cut skids*
6.4.7 Install the wear pads*
6.4.8 Adapt lateral scrolling
6.4.9 Changing the power take-off speed
6.4.10 Fill the tires
6.5 Hook up the machine
6.5.1 Remove the padlock*
6.5.2 Attach the hitch bracket
6.5.3 Rotate the support leg upwards
6.5.4 Assemble the cardan shaft
6.5.5 Attach the safety chain*
6.5.6 Connect the hydraulic hoses
6.5.7 Insert the lighting cable*
6.5.8 Lay out the pull rope
6.6 Unhook the machine
6.6.1 Remove the pull ropes
6.6.2 Turn the support leg downwards
6.6.3 Remove the lighting cable
6.6.4 Uncouple the hydraulic hoses
6.6.5 Dismantle the cardan shaft
6.6.6 Unhooking the safety chain*
6.6.7 Unhooking the coupling bracket
6.6.8 Attach the padlock*
6.7 Prepare for road traffic
6.7.1 Raise the mower
6.7.2 Turn the machine into transport position
6.7.3 Turn the machine into transport position
6.7.4 Close the stopcocks
6.7.5 Fold up the protection bracket
6.7.6 Mark the machine for road traffic
6.7.7 Check before driving on the road
6.8 Prepare the working position
6.8.1 Turn the machine to the working position
6.8.2 Turn the machine to the working position
6.8.3 Fold down the protection bracket
6.8.4 Lower the mower
6.9 Load the machine
6.9.1 Lift the machine
7 Management
7.1 Driving on the road
7.1.1 Circulation on public roads
7.2 Settings for use at work
7.2.1 Adjust cutter bar relief
7.2.2 Adjust the lifting height
7.2.3 Adjust cutting height
7.2.4 Adjust the tine conditioner
7.2.5 Changing the speed of the tine conditioner
7.2.6 Adjust the roller conditioner
7.2.7 Adjust swath width
7.2.8 Adjust swath width
7.2.9 Fixing the swath plates
7.2.10 Adjust spread width*
7.3 Use at work
7.3.1 Take into account during the field trip
7.3.2 Using the machine
7.3.3 Mowing with double row placement
7.3.4 Adapt the power take-off speed
7.3.5 Mowing technique
7.3.6 Raise the machine to the headland position
7.3.7 Instructions for mowing
7.3.8 Difficult harvest conditions
7.3.9 Recommendation regarding environmental protection
8 Incident and solution
8.1 Summary of incidents
8.1.1 Incidents on the machine
8.2 Electrical installation
8.2.1 Faulty lighting
8.3 Chassis
8.3.1 Change the main chassis wheel
8.3.2 Change the main chassis wheel
8.4 Mowing device
8.4.1 The mower disc does not rotate
9 Maintenance
9.1 Summary of maintenance intervals
9.1.1 Before harvest
9.1.2 After the first 10 hours of service
9.1.3 After the first 50 hours of service
9.1.4 Every 8 hours of operation
9.1.5 Every 50 hours of service
9.1.6 Every 100 hours of service
9.1.7 Every 250 hours of service
9.1.8 Every 500 hours of service or annually
9.1.9 After harvest
9.2 Gearbox
9.2.1 Check the tightness of the gear
9.2.2 Check the main gear oil level
9.2.3 Check the bevel gear oil level
9.2.4 Change main gear oil
9.2.5 Change bevel gear oil
9.3 Cardan shafts
9.3.1 Maintenance of cardan shafts
9.4 Clutches
9.4.1 Check the overload clutch
9.4.2 Ventilate the friction clutch
9.4.3 Check the friction discs
9.4.4 Clean the cardan shaft friction clutch
9.5 Chassis
9.5.1 Check tire pressure
9.5.2 Check the wheel nuts on the main chassis
9.5.3 Check the wheel nuts on the main chassis
9.6 Hydraulic installation
9.6.1 Check the hydraulic hoses
9.7 Mowing device
9.7.1 Check the oil level and oil quality of the cutter bar
9.7.2 Change the cutter bar oil
Drain oil
Fill oil
9.7.3 Check the mower blades
9.7.4 Change the mower blades
9.7.5 Check the blade support
9.7.6 Check the intermediate pieces
9.7.7 Clean the outlet hole of the feed drum
9.7.8 Check the feed drum wear strips
9.7.9 Check the feed drum cover
9.7.10 Check the feed drum sealing washer
9.7.11 Check the mower discs
9.7.12 Replacing the mower discs
9.7.13 Adjusting the winding protection
9.8 Preparation of the harvest
9.8.1 Check the conditioner drive belt
9.8.2 Change the conditioner drive belt
9.8.3 Tension the conditioner drive belt
9.8.4 Tension the conditioner drive belt
9.8.5 Check the tines
Change the tines
Replacing the tines with the tines screw pliers
Install the rubber spring
Straighten bent tines
9.8.6 Adjusting the synchronized running of the roller conditioner
9.8.7 Adjust the distance of the rollers
9.8.8 Adjust the roller conditioner spring
9.9 Assembly and body parts
9.9.1 Eliminate crop remains
9.9.2 Clean the machine
9.9.3 Maintain the machine
9.9.4 Check the fixing material
9.10 Greasing scheme
9.10.1 Grease the lubrication points every 50 hours of service
9.10.2 Grease the lubrication points every 100 hours of service
9.10.3 Grease the lubrication points every 250 hours of service
10 Decommissioning and waste disposal
10.1 General information
10.1.1 Decommissioning and waste disposal
11 EC declaration of conformity
11.1 DISC 3150 TC / 3150 TRC / 3150 TC FLAPGROUPER
11.1.1 EC declaration of conformity
12 Technical dictionary and abbreviations
12.1 Terms and explanations
12.1.1 Technical vocabulary
12.1.2 Abbreviations