Claas Liner 2600 Trend (G22) Swathers Operator Manual ES

File List:

00 2348 551 2.pdf

00 2348 551 2.pdf:

1. Introduction
1.1 Information regarding the instruction manual
1.1.1 Validity of the manual
1.1.2 Information about this instruction manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Information regarding warranty
1.1.7 Spare parts and technical issues
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable inappropriate application
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Meaning of the instruction manual
2.2.2 Observe graphic danger symbols and alarm indications
2.2.3 Requirements for all people working with the machine
2.2.4 Children in danger
2.2.5 Danger zones
2.2.6 Position yourself between the tractor and the machine
2.2.7 Accompanying persons
2.2.8 Couple the tractor with the machine
2.2.9 Risk of injury due to rotating shafts
2.2.10 Construction modifications
2.2.11 Optional equipment and spare parts
2.2.12 Control of the machine in operation
2.2.13 Operation only after correct commissioning
2.2.14 Technical status
2.2.15 Danger due to machine breakdowns
2.2.16 Comply with technical limit values
2.2.17 Danger due to coasting parts
2.2.18 Maintain functional protection devices
2.2.19 Personal protective equipment
2.2.20 Wear appropriate clothing
2.2.21 Remove dirt and loose objects
2.2.22 Prepare the machine for road traffic
2.2.23 Dangers when driving on the road and in the countryside
2.2.24 Park the machine safely
2.2.25 Parking without supervision
2.2.26 Unsuitable consumables
2.2.27 Safe handling of consumables and auxiliary materials
2.2.28 Environmental protection and waste disposal
2.2.29 Fire protection
2.2.30 Deadly electrical discharge through overhead lines
2.2.31 Behavior in the case of an overhead line voltage transfer and lightning strike
2.2.32 Liquids under pressure
2.2.33 Hot surfaces
2.2.34 Work only on the stopped machine
2.2.35 Maintenance work and repair work
2.2.36 Machine parts and lifted loads
2.2.37 Danger from welding work
2.3 Safety signage
2.3.1 Structure of graphic hazard symbols
2.3.2 Position of warning symbols on the machine
3 Machine Description
3.1 Summary and operation
3.1.1 Machine overview
3.1.2 Machine operating mode
3.2 Optional equipment
3.2.1 Hydraulic adjustment of the height of the swath rotors*
3.2.2 Individual lifting* with 2 hydraulic hoses
3.2.3 Individual lifting* with control panel
3.2.4 Windrowing canvas*
3.2.5 Rear tandem axles*
3.2.6 Spare wheel*
3.2.7 Wheel weights*
3.2.8 Mudguards*
3.2.9 Legal technical equipment of the European Union*
3.3 Identification plates and vehicle identification number
3.3.1 Machine identification plate
3.4 Machine information
3.4.1 Adhesive on the machine
4 Control and display instruments
4.1 Control elements
4.1.1 Hydraulic hose
4.1.2 Support leg
4.1.3 Windrower rotor
4.1.4 Individual lifting of swath rotors* with 2 hydraulic hoses
4.1.5 Individual lifting of rotors* with control desk
4.2 Indicator elements
4.2.1 Hooking device
4.2.2 Chassis
4.2.3 Swath rotor chassis
5 Technical data
5.1 LINER 2700 TREND
5.1.1 Dimensions
5.1.2 Weights
5.1.3 Tractor requirements
5.1.4 Version
5.1.5 Tire pressure
5.1.6 Lubricants
5.2 LINER 2600 TREND
5.2.1 Dimensions
5.2.2 Weights
5.2.3 Tractor requirements
5.2.4 Version
5.2.5 Tire pressure
5.2.6 Lubricants
6 Preparation of the machine
6.1 Turn off the machine and secure it
6.1.1 Shut down and secure the machine and tractor
6.1.2 Secure the lifted machine
6.2 Adapt the tractor
6.2.1 Front axle counterbalancing
6.2.2 Check the tractor power take-off protection device
6.3 Adapt the machine
6.3.1 Check the length of the cardan shaft
Shortest working position of the cardan shaft
Longest working position of the cardan shaft
6.3.2 Adapt the length of the cardan shaft
6.3.3 Assemble the cardan shaft to the machine
6.3.4 Mount the wheel weights*
6.4 Hooking up the machine
6.4.1 Remove the security lock*
6.4.2 Attach the hitch bracket
Secure drawbar hooks so they cannot be opened accidentally
6.4.3 Assemble the cardan shaft
6.4.4 Attach the safety chain*
6.4.5 Place the support leg upwards
6.4.6 Connect the hydraulic hose
6.4.7 Connect the hydraulic hoses for the hydraulic height adjustment of the swath rotors*
6.4.8 Connect the hydraulic hose for individual swath rotor lifting*
6.4.9 Assembling the individual lift control panel*
6.4.10 Plug in the lighting cable
6.4.11 Attach the pull rope
6.4.12 Save the shims
6.5 Unhooking the machine
6.5.1 Park the machine safely
6.5.2 Put the shims underneath
6.5.3 Unhook the pull rope
6.5.4 Unplug lighting cables
6.5.5 Disconnect the hydraulic hose
6.5.6 Disconnect the hydraulic hoses from the hydraulic height adjustment of the swath rotors*
6.5.7 Disconnect the hydraulic hose from the individual swath rotor lift*
6.5.8 Remove the individual lift control panel*
6.5.9 Remove the support leg
6.5.10 Unhook the safety chain*
6.5.11 Dismantle the cardan shaft
6.5.12 Unhook the coupling bracket
6.5.13 Engage the safety lock*
6.6 Prepare for road traffic
6.6.1 Folding the protective stirrup
6.6.2 Remove the tine holder
6.6.3 Remove the tine holder
6.6.4 Fold the machine into transport position
6.6.5 Insert the protective bars
6.6.6 Close the stopcock
6.6.7 Check before driving on the road
6.7 Prepare for use at work
6.7.1 Remove protective bars
6.7.2 Open the stopcock
6.7.3 Deploy the machine to the working position
6.7.4 Assemble the tine holders
6.7.5 Assemble the tine holders
6.7.6 Deploy the protective stirrup
6.8 Load the machine
6.8.1 Lift the machine
7 Management
7.1 Driving on the road
7.1.1 Circulation on public roads
7.2 Settings for use at work
7.2.1 Adjust the swath rotor
7.2.2 Mechanically adjust the raking height
7.2.3 Hydraulically adjust the raking height*
7.2.4 Adjust the height of the headrest position
7.2.5 Setting the working width and row width
7.2.6 Setting the working width and row width
Adjust the minimum working width with swath cloth*
7.2.7 Adjust the steering stop
7.3 Use at work
7.3.1 Fold the machine into transport position
7.3.2 Fold the machine into transport position
7.3.3 Deploy the machine to the working position
7.3.4 Raise the swath rotors to the headland position
7.3.5 Using the machine
7.3.6 Adapt the power take-off speed
7.3.7 Observe the stop angle
7.3.8 Make rows
7.3.9 Windrowing without swath cloth*
7.3.10 Install individual elevation of swath rotors with 2 hydraulic hoses*
Work with a single swath rotor
Lifting a swath rotor from the working position
Lowering a swath rotor from the headland position
Both swath rotors lowered to working position
Lifting lock function for individual lifting rotors
7.3.11 Use individual rotor lifting* with control desk
Work with a single swath rotor
Working with the right swath rotor
Working with the left swath rotor
8 Incident and solution
8.1 Chassis
8.1.1 Change the wheel on the transport chassis
8.1.2 Change the feeler wheel
Rear tandem axle*
8.1.3 Faults in the feeler wheels
8.1.4 The machine advances offset with respect to the tractor
Adjust track
8.1.5 Large tire wear
Adjust convergence
8.2 Electrical installation
8.2.1 Faulty lighting
9 Maintenance
9.1 Summary of maintenance intervals
9.1.1 Before harvest
9.1.2 After the first 10 hours of service
9.1.3 After the first 50 hours of service
9.1.4 Every 8 hours of service or daily
9.1.5 Every 20 hours of service
9.1.6 Every 50 hours of service
9.1.7 Every 100 hours of service
9.1.8 Every 250 hours of service
9.1.9 Every 500 hours of service or annually
9.1.10 Every 2 years
9.1.11 Every 5 years
9.1.12 After harvest
9.2 Gearbox
9.2.1 Check the tightness of the gear
9.2.2 Check the timing gear oil level
9.2.3 Change the timing gear oil
9.2.4 Check the swath gear oil level
9.2.5 Check the swath gear oil level
9.2.6 Change the swath gear oil
9.2.7 Change the swath gear oil
9.2.8 Check the swath gear screws
9.3 Clutch
9.3.1 Check the overload clutch
9.3.2 Ventilate the friction clutch
9.3.3 Clean the cardan shaft friction clutch
9.4 Cardan shaft
9.4.1 Maintenance of cardan shafts
9.4.2 Check the cardan shaft nuts
9.5 Chassis
9.5.1 Check tire pressure
9.5.2 Check the wheel nuts on the transport chassis
9.5.3 Check the wheel nuts on the swath rotor chassis
9.6 Hydraulic installation
9.6.1 Relieve pressure in the hydraulic system
9.6.2 Check the hydraulic hoses
9.6.3 Check the pressure accumulator*
9.7 Windrowing rotor
9.7.1 Check the screws connecting the swath rotors
9.7.2 Check the bolted connection of the swath rotors
9.7.3 Oil the profile of the tine holder
9.7.4 Check the spring
9.7.5 Check the tines
9.7.6 Check the slat plugs
9.8 Assembly and body parts
9.8.1 Check the hitch bar
9.8.2 Check the fixation of the chassis
9.8.3 Eliminate crop remains
9.8.4 Clean the machine
9.8.5 Maintain the machine
9.8.6 Check the fixing material
9.8.7 Prevent frost damage
9.9 Greasing scheme
9.9.1 Grease the grease points every 20 hours
9.9.2 Grease the lubrication points every 20 hours
9.9.3 Grease the grease points every 50 hours
9.9.4 Grease the lubrication points every 100 hours
9.9.5 Grease the lubrication points every 250 hours
10 Decommissioning and waste disposal
10.1 General information
10.1.1 Decommissioning and waste disposal
11 Declaration of conformity
11.1 LINER 2700 / 2600 TREND
11.1.1 EC declaration of conformity
12 Technical dictionary and abbreviations
12.1 Terms and explanations
12.1.1 Technical vocabulary
12.1.2 Abbreviations