Claas Xerion 5000-4200 (784) Tractors Repair Manual ES

File List:

00 0300 670 8.pdf

00 0300 670 8.pdf:

Repair manual
Introduction
Information regarding the instruction manual
Manual validity
Information regarding this repair manual
Using the manual
Structuring with construction group structure
Search and find
Direction signs
General repair instructions
Technical instructions
Indications for correct repair
Self-locking screws
Liquid screw insurance
Steel roller chains
connecting link
Type E connecting link with spring
Type G connecting link with wire
S type connecting link with pins
Tapered ring joints
Disassembly
Mounting
Head key joints
Disassembly
Mounting
Bearings with tension ring
Disassembly
Mounting
Bearing with tensioner sleeve
Disassembly
Mounting
Tension bushing
Disassemble
Disassembly version A
Disassembly version B
Tension bushing version A
Tension bushing version B
Safety rings
Radial shaft seal rings
Hose clamps
Tightening torques
Hose orientation
Auxiliary assembly material
Assembly tools
Screw connections with adjustment ring
Screw connections with non-sealed adjusting ring
Screw connections with sealing cone
Hydraulic hoses
Laying of hoses
Diaphragm accumulator (pressure accumulator) based on factory regulations CLAAS CN 24 0403
Signaling
Operational means
Service and assembly
Changing the gas filling
special tool
Joint surface work
Replacement parts
Consumables
Welding work
ESD protection measures
special tool
ESD protection measures
Instructions for testing and repair
Tightening torques
Types of screw connections according to CLAAS CN 02 5000 factory regulations
Screwdriving case description
Tolerance class
Tightening prescription
Tightening torques for ISO metric thread
Tightening torques for metric fine threads
Tightening torques for hydraulic threadings with adjusting ring
Tightening torques for pipe threads with sealing cone connection and hydraulic connections with soft ring seal
Tightening torques for bulkhead fitting nuts, straight and angled
Tightening torques for SDS form B and E hydraulic threaded fittings
Tightening torques for threaded fittings of the SDS hydraulic system form F and sealing screw
Tightening torques for threaded fittings of the SDS hydraulic installation form H
Tightening torques for form E plug screws
Tightening torques for threaded fittings of the hydraulic installation form C, conical thread
Tightening torques for threaded fittings of the SDE hydraulic installation form F, adjustable direction
Tightening torques for SDE form H hydraulic threaded fittings, adjustable
Tightening torques for oscillating hydraulic threadings
Tightening torques for hollow screws (with copper gasket)
Tightening torques for brake pipe threading
Tightening torques for pipe supports with O-ring and union nuts
Tightening torques for threaded grub screws / diaphragms
Tightening torques for grub screws and special screws
Tightening torques for hydraulic parts
Tightening torques for hexagonal sealing nuts
Tightening torques for hose clamps
Assembly instructions
Helical thread tightening clamps
Helical thread tightening clamps with Belleville springs
Hose clamps with round bolt
CCN Explanation
CCN (CLAAS Component Number)
General indications
Electrical regulations
Hydraulic regulations
CCN (CLAAS Component Number)
Security
General information
Especially important
Danger symbols
Prescriptions to avoid accidents with personal injuries
General information
Check, adjustment and repair work
Engine operation
Lifted loads
Work on pipes and hoses
Work on the Common Rail system
Electrical installation work
Work in the hydraulic installation
Electric welding
paint jobs
Work with urea solution
Tips on how to avoid damage and premature wear
General indications
Limitation of liability
General indications
Immobilization and storage
Prescriptions to avoid damage to health and the environment
Prevention measures to protect against health and environmental damage
Disposal of consumables and auxiliary consumables
Instructions for working on the diesel engine
Protection against accidents
Cleaning
Assembly instructions
Engine check
Commissioning after an engine overhaul
First aid measures
01 Engine
0102 Complete component
Engine characteristic data
OM 470 LA
OM 471 LA
OM 473 LA
Engine Description
engine components
Actuators
Power-on sequence
turn the engine
special tool
Special tool with motor mounted
Turn the engine in assembled state
Turn the engine in disassembled state
Place the engine at the top dead center of the ignition
Place the engine at top dead center of the ignition: Disassemble
0105 Engine suspension
Hooking rings
Technical instructions
Hooking rings
Technical instructions
0110 Engine casing
Technical instructions
special tool
Disassemble
Front crankshaft gasket
Technical instructions
special tool
Disassemble
Install the cassette seal ring
Rear crankshaft gasket
Technical instructions
special tool
Disassemble
Housing cover
Technical instructions
Disassemble
control box
Technical instructions
Disassemble
Oil separator
Technical instructions
Disassemble
Oil separator
Technical instructions
Disassemble
Oil separator
Technical instructions
Disassemble
0115 Engine propulsion
Technical instructions
special tool
Disassemble
Measure the overhang
Check test pressure
Connecting rod
Technical instructions
special tool
Disassemble
Cylinder shirt
Technical instructions
special tool
Disassemble
Measure the overhang
Measure the cylinder bore
Crankshaft
Technical instructions
special tool
Disassemble the crankshaft
Check the crankshaft
Install the crankshaft
crankshaft main bearing
Technical instructions
special tool
Disassemble
Renew the main bearing of the calibrated bearing cover
Renew the main bearing of the calibrated bearing cover
Renew the crankshaft main bearing
Renew the crankshaft main bearing
Renew the main bearing of the calibrated bearing cover
Vibration damper
Technical instructions
special tool
Disassemble
flywheel
Technical instructions
special tool
Disassemble
0120 Cylinder head / valves / distributor wheel
cylinder head cover
Technical instructions
Disassemble
Intermediate frame
Technical instructions
Disassemble
camshaft housing
Technical instructions
special tool
Disassemble
Valid for: OM 470 LA
Valid for: OM 470 LA
Valid for: OM 470 LA
Valid for: OM 470 LA
Camshafts
Technical instructions
special tool
Disassemble
Technical instructions
special tool
Disassemble
Technical instructions
Preparation for work
special tool
Disassemble
Technical instructions
Preparation for work
special tool
Disassemble
Input rocker mechanism
Technical instructions
Disassemble
Outlet rocker mechanism
Technical instructions
special tool
Disassemble
Technical instructions
special tool
Disassemble
Check the valves
Adjust valve clearance
Engine brake valves
Technical instructions
special tool
Adjust engine brake valve clearance
Valve springs and valve stem seals
Technical instructions
special tool
Disassemble
toothed transmission
Technical instructions
special tool
Disassemble
toothed transmission
Technical instructions
special tool
Disassemble
toothed transmission
Technical instructions
special tool
Disassemble
0125 Fuel/injection system
High pressure pipes and rail
Technical instructions
special tool
Disassemble
Rail pressure limiting valve
Technical instructions
Disassemble
Injectors
Technical instructions
Preparation for work
special tool
Disassemble
Injector hose set
Technical instructions
Preparation for work
Disassemble
Protective cap
Technical instructions
special tool
Disassemble
High pressure fuel pump
Technical instructions
Preparation for work
special tool
Disassemble
OM470 LA, OM471 LA from 032691, OM473 LA
When the high pressure fuel pump sprocket (OM471 LA to 032690) is damaged
Remove the drive pinion
OM470 LA from 168338, OM471 LA from 168338, OM473 LA from 168338
OM470 LA from 168338, OM471 LA from 168338, OM473 LA from 168338
OM470 LA from 168338, OM471 LA from 168338, OM473 LA from 168338
Install the drive sprocket
OM470 LA from 168338, OM471 LA from 168338, OM473 LA from 168338
OM470 LA from 168338, OM471 LA from 168338, OM473 LA from 168338
OM470 LA from 168338, OM471 LA from 168338, OM473 LA from 168338
2 level valve
Technical instructions
Assembly instructions
fuel pump
Technical instructions
Preparation for work
special tool
Disassemble
Valid for: OM470 / 471 LA
Valid for: OM 470/471 LA
Pressure limiting valve
Technical instructions
Assembly instructions
Quantity regulating valve
Technical instructions
Preparation for work
Disassemble
Quantity regulating valve
Technical instructions
Preparation for work
Disassemble
Quantity regulating valve
Technical instructions
Preparation for work
Disassemble
fuel filter module
Technical instructions
Preparation for work
Mounting pins for mounting the fuel filter module
special tool
Disassemble
0130 Lubricating oil system
Lubricating oil system
Technical instructions
special tool
Oil injection nozzle
Technical instructions
Disassemble
Oil-coolant module
Technical instructions
Preparation for work
Disassemble
Oil radiator
Technical instructions
Assembly instructions
Oil radiator
Technical instructions
Assembly instructions
Oil pump
Technical instructions
Disassemble
Oil pump
Technical instructions
Disassemble
Oil pump
Technical instructions
Disassemble
oil thermostat
Technical instructions
special tool
Disassemble
0135 Cooling system
Cooling agent
Technical instructions
special tool
Fill out
Clean the coolant circuit
Coolant pump
Technical instructions
Preparation for work
Disassemble
Coolant thermostat
Technical instructions
Disassemble
0140 Exhaust gas system
Exhaust gas return radiator
Technical instructions
special tool
Disassemble
Exhaust gas return radiator
Technical instructions
special tool
Disassemble
Exhaust gas return radiator
Technical instructions
special tool
Disassemble
Exhaust gas return radiator support
Technical instructions
Preparation for work
Remove the exhaust gas return radiator support
Install the exhaust gas return radiator support
Exhaust gas return actuator
Technical instructions
Disassemble
Exhaust gas return actuator
Technical instructions
special tool
Disassemble
Exhaust gas return valve
Technical instructions
Disassemble
Differential pressure sensor
Technical instructions
exhaust gas elbow
Technical instructions
Preparation for work
Disassemble
exhaust gas elbow
Technical instructions
Preparation for work
Disassemble
exhaust gas elbow
Technical instructions
Preparation for work
Disassemble
Exhaust gas turbocharger
Technical instructions
Preparation for work
Disassemble
Exhaust gas turbocharger
Technical instructions
Preparation for work
Disassemble
Exhaust gas turbocharger
Technical instructions
Preparation for work
Disassemble
TURBO-COMPOUND turbine
Technical instructions
Preparation for work
Disassemble
TURBO-COMPOUND gear
Technical instructions
Preparation for work
Disassemble
0145 Air suction
Air intake housing
Technical instructions
Disassemble
Air intake housing
Technical instructions
Disassemble
0150 Engine coupled parts
Starting motor
Technical instructions
Disassemble
Generator
Technical instructions
special tool
Disassemble the generator
Assemble the generator
Resonance vessel
Technical instructions
Assembly instructions
Resonance vessel
Technical instructions
Assembly instructions
pressure air compressor
Technical instructions
Preparation for work
special tool
Disassemble
Remove the drive pinion
Install the drive sprocket
pressure air compressor
Technical instructions
Preparation for work
special tool
Disassemble
Remove the drive pinion
Install the drive sprocket
0155 Engine adjustment
control device
Technical instructions
Disassemble
Only when the control unit is renewed
OM470 LA and OM471 LA with front air intake
0165 Exhaust gas aftertreatment
Exhaust gas aftertreatment system
Technical instructions
Preparation for work
special tool
Check the urea solution (purity)
Control the urea solution (density)
Diesel particulate filter exhaust aftertreatment
Technical instructions
Disassemble
Install the DPF
Mount the profile clamp
Assemble the flat band clamp
Install service cover
urea heating valve
Technical instructions
Preparation for work
special tool
Disassemble
urea pump
Technical instructions
Preparation for work
special tool
Disassemble the urea pump
Assemble the urea pump
Remove the filter from the inlet fitting
Install the inlet fitting filter
Remove the pressure limiting valve
Install the pressure relief valve
Remove the antifreeze element
Install the antifreeze element
Urea Dosing Unit (A089/A67-MB)
Technical instructions
Preparation for work
special tool
Separate the hose (flexible hoses only)
Disassemble the dosing unit
Assemble the dosing unit
Disassemble the filter
Install the filter
0190 Accessories
motor insulation
Technical instructions
Preparation for work
Disassemble