File List:
00 0295 864 3.pdf
00 0295 864 3.pdf:
CONSPEED 8-75 FC – 4-70 C LINEAR
Contents
1 About this user manual
1.1 Notes regarding the instructions
1.1.1 General advice
1.1.2 Validity of the notice
1.1.3 Use of the instructions
1.1.4 Symbols and instructions
1.1.5 Machine equipment
1.1.6 Technical specifications
2 Security
2.1 Safety instructions in this guide
2.1.1 Marking of warning and danger instructions
2.2 Safety instructions for use
2.2.1 To be respected when carrying out work on the machine
2.2.2 Important
2.2.3 General safety and accident prevention instructions
2.2.4 Reasonably foreseeable misuse
2.2.5 Use in accordance with instructions
2.2.6 Security measures
2.2.7 Traveling on the road
2.2.8 Install the supply channel safety support
2.2.9 Remove the safety support from the supply channel
2.2.10 Compressed air and water
2.2.11 Risks of injury from hydraulic fluid
2.2.12 Burn prevention
2.2.13 Oil
2.2.14 Prevention of fires and explosions
2.2.15 Pipes, cables, pipes and hoses
2.2.16 Before each commissioning
2.2.17 First aid measures
2.2.18 Load the front implement and secure it
2.3 Safety marking on the machine
2.3.1 Warning pictogram
2.3.2 Position of warning pictograms
3 Description of the machine
3.1 Overview and mode of operation
3.1.1 CONSPEED LINEAR overview
3.1.2 CONSPEED LINEAR operating mode
3.2 Nameplates and identification number
3.2.1 Position of nameplates
3.2.2 Explanation of machine nameplate
3.2.3 Spare parts and technical questions
3.3 Optional machine equipment
3.3.1 Pinion, feed auger speed
3.3.2 Gear pairs, main gearbox
3.3.3 LEXION washer set
3.3.4 Counterblade of the chopping unit
3.3.5 Skate heightening
3.3.6 Hood raise
3.3.7 Sunflower kit
3.3.8 Auger for poured corn
3.3.9 Stubble breaker
3.3.10 Skate tips
3.3.11 Cob recovery rubber
3.3.12 Safety bar
3.3.13 AUTO CONTOUR probe
3.3.14 AUTOPILOT
4 Technical characteristics
4.1 CONSPEED LINEAR
4.1.1 Dimensions
4.1.2 Weight
4.1.3 Bodywork
4.1.4 Lubricants
5 Preparing the machine
5.1 Before commissioning
5.1.1 To be carried out before the first commissioning
5.1.2 To be carried out before each commissioning
5.2 Assembling the front tool
5.2.1 Install the hood tip
5.2.2 Adjust the fairing tip to the transport position
5.2.3 Install thatch breakers*
5.2.4 Install the pad*
5.2.5 Install the safety bar power socket*
5.2.6 Install the counter-blade of the chopping unit*
5.2.7 Install the cob recovery rubber*
Corn recovery rubber* to screw on
Corn recovery rubber* to insert
5.3 Install the front tool
5.3.1 Install the front tool
5.3.2 Adapt the machine
5.3.3 Select CONSPEED
5.3.4 Select cardan shaft
5.3.5 Modify cardan shafts
Check the cardan shaft
Remove the cardan shaft
Install the cardan shaft
5.3.6 Hanging the front tool
5.3.7 Lock the front tool
5.3.8 Install the multiple coupling
5.3.9 Install the cardan shaft
5.3.10 Bring the crutches backwards
5.3.11 Check the scraper profile
5.3.12 Learn the end stops of the hydraulic adjustment of picking plates
5.3.13 Identify hydraulic oil
5.4 Remove the front tool
5.4.1 Remove the front tool
5.4.2 Remove the multiple coupling
5.4.3 Remove the cardan shaft
5.4.4 Unlock the front tool
5.4.5 Take out the crutches
5.4.6 Unhook the front tool
5.5 Prepare for road travel
5.5.1 Install the safety bar*
5.5.2 Install the safety bar
5.5.3 Install protective cloths
5.6 Prepare the work
5.6.1 Remove the safety bar
5.6.2 Remove the protective cloths
5.7 Loading the machine
5.7.1 Load the front implement and secure it
6.1 Driving on the road
6.1.1 Traveling on the road
6.1.2 Fold down to transport position
6.2 Work
6.2.1 Work
6.2.2 Fold down to working position
6.3 Power group
6.3.1 Adjust the feed speed
6.3.2 Install the 74 tooth* pinion of the feed screw
6.4 Picking device
6.4.1 Adjusting the fairing tip
Approximate adjustment
Precise adjustment of the central fairing points
Precise adjustment of the outer fairing tips
6.4.2 Lock the cover
6.4.3 Place the fairing in the maintenance position
6.4.4 Mechanically adjust the picking plates
6.4.5 Hydraulically adjust the picking plates
7 Incidents and remedies
7.1 Overview of faults
7.1.1 CONSPEED failure and solution
8 Maintenance
8.1 General maintenance work
8.1.1 Fixing material
8.2 Overview of maintenance frequencies
8.2.1 Handling maintenance intervals
8.2.2 Before the start of the harvest
8.2.3 After the first 10 hours of operation
8.2.4 After the first 20 hours of operation
8.2.5 After the first 50 hours of operation
8.2.6 Every 10 operating hours
8.2.7 Every 50 operating hours
8.2.8 Every 100 operating hours
8.2.9 Every 150 hours of service
8.2.10 Every 250 operating hours
8.2.11 Annually or every 500 hours of service
8.2.12 After harvest
8.3 Transmission / Clutch / Cardan shaft
8.3.1 Change the main gearbox oil
Change the oil in the main gearbox
Pour oil into main gearbox
Check main gearbox oil level
8.3.2 Change the header gearbox oil
Change oil from header gearbox
Fill the header gearbox with oil
Check header gearbox oil level
8.3.3 Check feed auger drive overload coupling
8.4 Workouts
8.4.1 Adjusting the feed auger drive chain
8.5 Picking device
8.5.1 Adjust the scraper plates
8.5.2 Adjust the picking plates
8.5.3 Check the harvester drum knives
8.5.4 Replace the harvester drum knives
8.5.5 Adjusting the feed chains
8.5.6 Clean the feed chain
8.6 Hashing
8.6.1 Replacing the chopper knives
8.6.2 Check the chopper knives
8.6.3 Check the tightening torque of the chopper knives
8.7 Lubrication plan
8.7.1 Lubricate the lubrication points every 10 operating hours
8.7.2 Lubricate the lubrication points every 50 operating hours
8.7.3 Lubricate the lubrication points every 100 operating hours
Rear lubrication points every 100 hours of service
Lubrication points before every 100 operating hours
8.7.4 Lubricate the lubrication points every 250 operating hours
9 Decommissioning and disposal
9.1 General information
9.1.1 Decommissioning and disposal
10 CE declaration of conformity
10.1 CONSPEED LINEAR
10.1.1 Declaration of conformity for EEC
10.1.2 Declaration of conformity for EEC
11 Technical terms and abbreviations
11.1 Terms and explanations
11.1.1 Specialized terms
11.1.2 Abbreviations
Claas Operator Manual PDF
Claas Operator Manual PDF
Claas QUANTUM 3800 K 3500 P-K-S (613) Loader Wagons Operator Manual DE
![](https://automanual.net/wp-content/uploads/2024/04/claas-conspeed-8-75-70-fc-linear-i01-combines-operator-manual-fr-1.jpg)