komatsu pc50mr 2 galeo hydraulic excavator operation and maintenance manual weam006702 1

komatsu pc50mr 2 galeo hydraulic excavator operation and maintenance manual weam006702 2 2

komatsu pc50mr 2 galeo hydraulic excavator operation and maintenance manual weam006702 3

komatsu pc50mr 2 galeo hydraulic excavator operation and maintenance manual weam006702 4

komatsu pc50mr 2 galeo hydraulic excavator operation and maintenance manual weam006702 5

Komatsu PC50MR-2 Galeo Hydraulic Excavator Operation and Maintenance Manual WEAM006702

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: WEAM006702
Format: PDF
Size: 9.1MB
Number of Pages: 230

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- PC50MR-2 Galeo Hydraulic Excavator

1. FOREWORD
2. INFORMATION ON SAFETY
3. INTRODUCTION
3.1. INTENDED USES
3.2. IMPROPER OR UNAUTHORIZED USES
3.3. MAIN CHARACTERISTICS
3.4. RUNNINGIN
4. PRODUCT IDENTIFICATION
4.1. MACHINE SERIAL NUMBER
4.2. MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN)
4.3. ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
4.4. TRAVEL REDUCTION GEAR SERIAL NUMBER
4.5. SWING REDUCTION GEAR SERIAL NUMBER
4.6. CAB SERIAL NUMBER
4.7. SERIAL NUMBERS AND DEALERS ADDRESS
5. TABLE OF CONTENTS
6. SAFETY, NOISE AND VIBRATION PLATES
6.1. POSITION OF THE SAFETY PLATES
6.2. PICTOGRAMS AND RELEVANT MEANINGS
6.3. POSITION OF THE NOISE PLATES ON MACHINES WITH CAB
6.4. POSITION OF THE NOISE PLATES ON MACHINES WITH CANOPY
6.5. VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED
7. GENERAL PRECAUTIONS
7.1. GENERAL SAFETY RULES
7.2. SAFETY DEVICES AND GUARDS
7.3. CLOTHING AND PERSONAL PROTECTION ITEMS
7.4. UNAUTHORIZED MODIFICATIONS
7.5. LEAVING THE OPERATORS SEAT
7.6. GETTING ON AND OFF THE MACHINE
7.7. PREVENTING FIRES DUE TO FUEL AND OIL
7.8. PREVENTING BURNS
7.9. PREVENTING DAMAGE DUE TO ASBESTOS POWDER
7.10. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
7.11. FIRE EXTINGUISHERS AND FIRST AID KIT
7.12. PRECAUTIONS CONCERNING THE CAB STRUCTURE
7.13. PRECAUTIONS CONCERNING THE EQUIPMENT
8. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
8.1. SAFETY ON THE WORK SITE
8.2. FIRE PREVENTION
8.3. PRECAUTIONS TO BE TAKEN FOR THE OPERATORS CAB
8.4. ROOM VENTILATION
8.5. PRECAUTIONS TO BE TAKEN FOR THE LIGHTS
8.6. CLEANING THE WINDOWS CHECKING THE WINDSHIELD WIPER BLADES
9. PRECAUTIONS TO BE TAKEN WHEN WORKING
9.1. STARTING THE ENGINE
9.2. CHECK THE DIRECTION BEFORE STARTING THE MACHINE
9.3. CHECKS FOR TRAVELLING IN REVERSE
9.4. MOVING THE MACHINE
9.5. MOVING ON SLOPES
9.6. WORKING ON SLOPES
9.7. UNAUTHORIZED OPERATIONS
9.8. PREVENTING ELECTROCUTION
9.9. VISIBILITY
9.10. WORKING ON ICY OR SNOWCOVERED SURFACES
9.11. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
9.12. WORKING ON LOOSE GROUND
9.13. PARKING THE MACHINE
10. TRANSPORTING THE MACHINE ON MOTOR VEHICLES
10.1. LOADING AND UNLOADING
10.2. TRANSPORT
11. BATTERY
11.1. PREVENTING RISKS THAT MAY BE DUE TO THE BATTERY
11.2. STARTING WITH BOOSTER CABLES
12. PRECAUTIONS FOR THE REMOVAL
13. PRECAUTIONS FOR MAINTENANCE
13.1. WARNING PLATES
13.2. TOOLS
13.3. PERSONNEL
13.4. EQUIPMENT
13.5. WORKING UNDER THE MACHINE
13.6. CLEANING THE MACHINE
13.7. USE OF THE ENGINE DURING MAINTENANCE OPERATIONS
13.8. PERIODICAL CHANGE OF THE PARTS THAT ARE CRITICAL FOR SAFETY
13.9. STOP THE ENGINE BEFORE CARRYING OUT ANY MAINTENANCE OPERATION OR INSPECTION
13.10. RULES TO BE FOLLOWED DURING FUEL OR OIL TOPPING UP
13.11. CHECKING THE COOLANT LEVEL IN THE RADIATOR
13.12. USING LAMPS
13.13. PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR
13.14. PRECAUTIONS CONCERNING THE STARTER
13.15. HANDLING HIGHPRESSURE PIPES
13.16. PRECAUTIONS TO BE TAKEN WHEN HANDLING HIGHPRESSURE OIL
13.17. PRECAUTIONS FOR MAINTENANCE OPERATIONS AT HIGH TEMPERATURES AND HIGH PRESSURE
13.18. COOLING FAN AND BELT
13.19. WASTE MATERIALS
13.20. PRECAUTIONS FOR THE USE OF THE synthetic biodegradable oil type HEES
14. MACHINE VIEW ILLUSTRATIONS
14.1. OVERALL MACHINE VIEW
14.2. CONTROLS AND GAUGES
15. DETAILED CONTROLS AND GAUGES
15.1. MONITORING SYSTEM
15.2. SWITCHES
15.3. CONTROL LEVERS AND PEDALS
15.4. WINDSHIELD (Machines equipped with cab)
15.5. SLIDING DOOR (Machines equipped with cab)
15.6. SLIDING WINDOW (Machines equipped with cab)
15.7. EMERGENCY ESCAPE HAMMER (Machines equipped with cab)
15.8. COVER WITH LOCK
15.9. ENGINE REAR COVER
15.10. COOLING COVER
15.11. MUD COVER
15.12. METHOD OF OPENING (TILTING) FLOOR
15.13. FUSE
15.14. BLOCK FUSE
15.15. AUXILIARY ELECTRIC POWER
15.16. OPERATION MANUAL STORAGE
15.17. TOOL BOX
15.18. GREASE GUN HOLDER
16. MACHINE OPERATIONS AND CONTROLS
16.1. BEFORE STARTING ENGINE
16.2. AFTER STARTING ENGINE
16.3. STOPPING THE ENGINE
16.4. MACHINE OPERATION
16.5. STEERING THE MACHINE
16.6. SWINGING
16.7. WORK EQUIPMENT CONTROLS AND OPERATIONS
16.8. PROHIBITED OPERATIONS
16.9. GENERAL OPERATION INFORMATION
16.10. TRAVELING ON SLOPES
16.11. ESCAPE FROM MUD
16.12. WORK POSSIBLE USING COMPACT HYDRAULIC EXCAVATOR
16.13. CHANGING THE BUCKET
16.14. PARKING MACHINE
16.15. CHECK AFTER SHUT OFF ENGINE
16.16. MACHINE INSPECTION AFTER DAILY WORK
16.17. LOCKING
16.18. RUBBER SHOES AND ROAD LINERS (Machine equipped with rubber shoe or road liner)
17. TRANSPORTATION
17.1. TRANSPORTATION PROCEDURE
17.2. LOADING AND UNLOADING WITH TRAILER
17.3. LIFTING MACHINE
18. COLD WEATHER OPERATION
18.1. COLD WEATHER OPERATION INFORMATION
18.2. CAB HEATER IN COLD WEATHER (Machines equipped with cab)
18.3. AFTER DAILY WORK COMPLETION
18.4. AFTER COLD WEATHER SEASON
19. LONG TERM STORAGE
19.1. BEFORE STORAGE
19.2. DURING STORAGE
19.3. AFTER STORAGE
20. TROUBLES AND ACTIONS
20.1. RUNNING OUT OF FUEL
20.2. PHENOMENA THAT ARE NOT FAILURES
20.3. TOWING THE MACHINE
20.4. SEVERE JOB CONDITION
20.5. DISCHARGED BATTERY
20.6. OTHER TROUBLE
21. MAINTENANCE INFORMATION
22. LUBRICANTS, COOLANT AND FILTERS
22.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
22.2. ELECTRIC SYSTEM MAINTENANCE
22.3. HANDLING HYDRAULIC SYSTEM
23. WEAR PARTS
23.1. WEAR PARTS LIST
24. LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS
24.1. HOMOLOGATED HEES SYNTHETIC BIODEGRADABLE LUBRICANTS
25. TIGHTENING TORQUE SPECIFICATIONS
25.1. TIGHTENING TORQUE LIST
26. LUBRICATION
26.1. LUBRICATION DIAGRAM
27. SAFETY CRITICAL PARTS
27.1. SAFETY CRITICAL PARTS LIST
28. MAINTENANCE SCHEDULE
28.1. MAINTENANCE SCHEDULE CHART
28.2. WHEN REQUIRED
28.3. CHECKS BEFORE STARTING 194
28.4. EVERY 500 HOURS MAINTENANCE
28.5. EVERY 1000 HOURS MAINTENANCE
28.6. EVERY 2000 HOURS MAINTENANCE
28.7. MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
29. MAINTENANCE PROCEDURE
29.1. WHEN REQUIRED
29.2. CHECK BEFORE STARTING
29.3. EVERY 500 HOURS MAINTENANCE
29.4. EVERY 1000 HOURS MAINTENANCE
29.5. EVERY 2000 HOURS MAINTENANCE
30. SPECIFICATIONS
31. LIFTING CAPACITIES
32. ATTACHMENTS AND OPTIONS GENERAL INFORMATION
32.1. SAFETY FIRST
32.2. ATTACHMENT INSTALLATION
32.3. CHARACTERISTICS OF THE OPTIONAL EQUIPMENT
33. MACHINE READY FOR ATTACHMENT
33.1. LOCATIONS
33.2. HYDRAULIC CIRCUIT
34. ATTACHMENT OPERATIONS
34.1. LONG TERM STORAGE
34.2. SPECIFICATIONS
35. ATTACHMENT GUIDE
35.1. ATTACHMENT COMBINATIONS
36. RECOMMENDED ATTACHMENT OPERATIONS
36.1. HYDRAULIC BREAKER

Rate this product