komatsu wa320 5 wheel loader operation and maintenance manual veam240102 1

komatsu wa320 5 wheel loader operation and maintenance manual veam240102 2

komatsu wa320 5 wheel loader operation and maintenance manual veam240102 3

komatsu wa320 5 wheel loader operation and maintenance manual veam240102 4

komatsu wa320 5 wheel loader operation and maintenance manual veam240102 5

Komatsu WA320-5 Wheel Loader Operation and Maintenance Manual VEAM240102

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: VEAM240102
Format: PDF
Size: 8.3MB
Number of Pages: 288

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- WA320-5 Wheel Loader

1. FOREWORD
1.1. FOREWORD
1.2. SAFETY INFORMATION
1.3. INTRODUCTION
1.3.1. INTENDED USE
1.3.2. DIRECTIONS OF MACHINE
1.4. NECESSARY INFORMATION
1.4.1. PIN/MACHINE SERIAL NO. PLATE AND POSITION
1.4.2. ENGINE SERIAL NO. PLATE AND POSITION
1.4.3. ROPS/FOPSCAB SERIAL NO. PLATE
1.4.4. AXLE SERIAL NO. PLATE
1.4.5. TRANSMISSION SERIAL NO. PLATE
1.4.6. SEAT OPERATOR SERIAL NO. PLATE
1.4.7. POSITION OF SERVICE METER
1.4.8. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
1.5. CONTENTS
1.6. DIMENSIONS, WEIGHTS AND OPERATING DATA
1.6.1. WA3205 DIMENSIONS, WEIGHTS AND OPERATING DATA
1.7. CECONFORMING EQUIPMENT
1.7.1. CECONFORMING EQUIPMENT
1.7.2. MANUFACTURERSUPPLIED CECONFORMING EQUIPMENT, ACCORDING TO DOCUMENT 42193H1900
2. SAFETY
2.1. SAFETY LABELS
2.1.1. LOCATION OF SAFETY LABELS
2.1.2. PRESENTATION OF SAFETY LABELS
2.2. GENERAL PRECAUTIONS
2.3. PRECAUTIONS FOR OPERATION
2.3.1. STARTING ENGINE
2.3.2. OPERATION
2.3.3. TRANSPORTATION
2.3.4. BATTERY
2.3.5. TOWING
2.4. PRECAUTIONS FOR MAINTENANCE
2.5. PRECAUTIONS WITH TIRES
3. OPERATION
3.1. GENERAL VIEW
3.1.1. GENERAL VIEW OF MACHINE
3.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
3.2. EXPLANATION OF COMPONENTS
3.2.1. MACHINE MONITOR
3.2.2. SWITCHES
3.2.3. CONTROL LEVERS, PEDALS
3.2.4. STEERING TILT LOCK LEVER
3.2.5. CAP AND COVER WITH LOCK
3.2.6. SAFETY BAR
3.2.7. TOWING PIN
3.2.8. GREASE PUMP
3.2.9. CAB DOOR INNER LOCK
3.2.10. CAB DOOR OPEN LOCK
3.2.11. CAB WINDOW OPEN LOCK CANCEL KNOB
3.2.12. FUSE
3.2.13. SLOW BLOW FUSE
3.2.14. POWER OUTLET
3.2.15. STORAGE BOX
3.2.16. AIR CONDITIONER
3.2.17. HANDLING CAB WIPER
3.3. OPERATION
3.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
3.3.2. STARTING ENGINE
3.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
3.3.4. STOPPING ENGINE
3.3.5. MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE
3.3.6. TURNING
3.3.7. OPERATION OF WORK EQUIPMENT
3.3.8. WORK POSSIBLE USING WHEEL LOADER
3.3.9. PRECAUTIONS FOR OPERATION
3.3.10. ADJUSTING WORK EQUIPMENT POSTURE
3.3.11. PARKING MACHINE
3.3.12. CHECK AFTER STOPPING ENGINE
3.3.13. CHECKS AFTER COMPLETION OF OPERATION
3.3.14. LOCKING
3.3.15. HANDLING THE TIRES
3.4. TRANSPORTATION
3.4.1. TRANSPORTATION PROCEDURE
3.4.2. LOADING, UNLOADING WORK WITH TRAILERS
3.4.3. LIFTING MACHINE
3.5. COLD WEATHER OPERATION
3.5.1. PRECAUTIONS FOR LOW TEMPERATURE
3.5.2. PRECAUTIONS AFTER COMPLETION OF WORK
3.5.3. AFTER COLD WEATHER
3.5.4. WARMINGUP OPERATION FOR STEERING HYDRAULIC CIRCUIT IN COLD WEATHER
3.6. LONGTERM STORAGE
3.6.1. BEFORE STORAGE
3.6.2. DURING STORAGE
3.6.3. AFTER STORAGE
3.7. TROUBLESHOOTING
3.7.1. WHEN MACHINE RUNS OUT OF FUEL
3.7.2. TOWING THE MACHINE
3.7.3. IF BATTERY IS DISCHARGED
3.7.4. OTHER TROUBLE
4. MAINTENANCE
4.1. GUIDES TO MAINTENANCE
4.2. OUTLINES OF SERVICE
4.2.1. HANDLING OIL, FUEL, COOLANT, GREASE AND CARRYING OUT KOWA (Komatsu Oil Wear Analysis)
4.2.2. OUTLINE OF ELECTRIC SYSTEM
4.3. WEAR PARTS
4.3.1. WEAR PARTS LIST
4.4. FUEL, COOLANT AND LUBRICANTS
4.4.1. LUBRICATION CHART
4.4.2. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
4.4.3. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
4.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
4.5.1. TORQUE LIST
4.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
4.7. MAINTENANCE SCHEDULE CHART
4.7.1. MAINTENANCE SCHEDULE CHART
4.8. SERVICE PROCEDURE
4.8.1. INITIAL 50 HOURS SERVICE
4.8.2. INITIAL 250 HOURS SERVICE
4.8.3. WHEN REQUIRED
4.8.4. CHECK BEFORE STARTING
4.8.5. EVERY 50 HOURS SERVICE
4.8.6. EVERY 100 HOURS SERVICE
4.8.7. EVERY 250 HOURS SERVICE
4.8.8. EVERY 500 HOURS SERVICE
4.8.9. EVERY 1000 HOURS SERVICE
4.8.10. EVERY 2000 HOURS SERVICE
4.8.11. EVERY 4000 HOURS SERVICE
5. TECHNICAL DATA
5.1. TECHNICAL DATA
5.2. NOISE EMISSION LEVELS
5.3. VIBRATION LEVELS
5.3.1. Operating condition
5.3.2. Guide to Reduce Vibration Levels on Machine
6. ATTACHMENTS, OPTIONS
6.1. SELECTING BUCKET AND TIRES
6.2. MULTIFUNCTION LEVER (with/without auxiliary control lever)
6.2.1. EXPLANATION OF COMPONENTS
6.2.2. OPERATION
6.3. METHOD OF USING 3 LEVERS
6.3.1. EXPLANATION OF COMPONENTS
6.3.2. OPERATION
6.4. HANDLING HYDRAULIC QUICK COUPLER
6.4.1. INSTALLING THE ATTACHMENT
6.4.2. REMOVAL AND INSTALLATION OF THE ATTACHMENT
6.4.3. PRECAUTIONS FOR USE
6.4.4. PRECAUTIONS WHEN REMOVING THE ATTACHMENT
6.5. HANDLING FORK TOOL
6.5.1. EXPLANATION OF COMPONENTS
6.5.2. OPERATION
6.6. REVERSIBLE FAN
6.7. CENTRAL LUBRICATION SYSTEM
6.7.1. OPERATING THE CENTRAL LUBRICATION SYSTEM
6.7.2. DISPLAY AND CONTROL UNIT
6.7.3. CHANGING THE LUBRICATION INTERVAL TIMES
6.8. HANDLING MACHINES EQUIPPED WITH KOMTRAX
6.8.1. BASIC PRECAUTIONS

Rate this product