bomag bw 27 rh rubber tire roller operating and maintenance instructions 00804841 1

bomag bw 27 rh rubber tire roller operating and maintenance instructions 00804841 2

bomag bw 27 rh rubber tire roller operating and maintenance instructions 00804841 3

bomag bw 27 rh rubber tire roller operating and maintenance instructions 00804841 4

bomag bw 27 rh rubber tire roller operating and maintenance instructions 00804841 5

Bomag BW 27 RH Rubber Tire Roller Operating and Maintenance Instructions 00804841

$20.00

Type Of Manual: Operating and Maintenance Instructions
Manual ID: 00804841
Format: PDF
Size: 6.1MB
Number of Pages: 148
Serial Number:
101538111085 and up
101538311001 and up
861538221001 and up

Category: Bomag Operator Manual PDF

Model List:
- BW 27 RH Rubber Tire Roller

1. Table of contents
2. Foreword
3. Technical Data
4. Safety regulations
5. Indicators and Controls
5.1. General notes
5.2. Description of indicators and control elements
6. Operation
6.1. General
6.2. Tests before taking into operation
6.3. Operating the drivers seat
6.4. Electronic immobilizerOptional equipment
6.5. Starting the engine
6.6. Driving the machine / braking the machine
6.7. Stopping the machine, operating the parking brake
6.8. Shutting the engine down, parking the machine
6.9. Actuating the emergency stop switch
6.10. Operating the pressure sprinkler system
6.11. Operating the tire inflation systemOptional equipment
6.12. Operating the hood
6.13. Operating the heating/air conditioning systemOptional equipment
6.14. Ballasting of machineOptional equipment
6.15. Towing in case of an engine failure
6.16. Loading/transport
7. Maintenance
7.1. General notes on maintenance
7.2. Fuels and lubricants
7.3. Table of fuels and lubricants
7.4. Runningin instructions
7.5. Maintenance table
7.6. Every 10 operating hours
7.6.1. Check the engine oil level
7.6.2. Checking the fuel level
7.6.3. Checking the coolant level
7.6.4. Check the hydraulic oil level
7.6.5. Checking the water level
7.6.6. Checking the scrapers
7.6.7. Multidisc brake, function test
7.6.8. Draining the air pressure vessel
7.7. Every 250 operating hours
7.7.1. Clean the cooling fins on engine and hydraulic oil cooler
7.7.2. Check the oil level in the drive gear/wheel hub
7.8. Every 500 operating hours
7.8.1. Changing engine oil and oil filter cartridge
7.8.2. Check, clean the water separator
7.8.3. Check the antifreeze concentration and the condition of the coolant
7.8.4. Drain the fuel tank sludge
7.8.5. Battery service, checking the main battery switch
7.8.6. Checking, replacing the refrigerant compressor VbeltOptional equipment
7.8.7. Service the air conditioningOptional equipment
7.8.8. Cleaning the circulation air filter for the heatingOptional equipment
7.8.9. Check hydraulic, pneumatic hoses and electric cables.
7.8.10. Check steering for wear
7.8.11. Replacing the bypass filter (optional equipment)
7.9. Every 1000 operating hours
7.9.1. Replacing the fuel filter cartridge
7.9.2. Change the fuel filter, bleed the fuel system
7.9.3. Checking condition and tension of ribbed Vbelt.
7.9.4. Check the engine mounts
7.9.5. Retighten the wheel studs
7.9.6. Checking the Roll Over Protective Structure (ROPS/FOPS)
7.9.7. Changing the air drier for the brake system
7.9.8. Check the travel control
7.10. Every 2000 operating hours
7.10.1. Adjust the valve clearance
7.10.2. Changing the oil in travel gears/wheel hubs
7.10.3. Changing hydraulic oil and breather filter
7.10.4. Replacing the hydraulic oil filter
7.10.5. Changing the coolant
7.10.6. Check the supply lines for the compressor
7.11. Every 3000 operating hours
7.11.1. Replacing ribbed Vbelt and idler pulley
7.12. Every 6000 operating hours
7.12.1. Replace the injection valves
7.12.2. Replace crankcase ventilation valve
7.13. As required
7.13.1. Air filter maintenance
7.13.2. Service the water sprinkling system
7.13.3. Maintenance in case of frost
7.13.4. Filling the windscreen washer system
7.13.5. Change the tires
7.13.6. Clean the machine
7.13.7. Check bolted connections for tight fit
7.13.8. Temporary taking out of service
8. Trouble shooting
8.1. General notes
8.2. Reading out fault codes of the electronic engine control (EMR)
8.3. Starting with jump wires
8.4. Engine problems
9. Tire compaction values
10. Disposal
10.1. Final shutdown of machine

Rate this product