Support
Email
admin@automanual.net
Follow us
Linde 352-06 - H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up
Linde 352-06 - H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up - Image 2
Linde 352-06 - H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up - Image 3
Linde 352-06 - H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up - Image 4
Linde 352-06 - H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up - Image 5
linde 352 06 h40d h45d h50d production site xiamen operating instructions sn c1x352x50001 and up 2
linde 352 06 h40d h45d h50d production site xiamen operating instructions sn c1x352x50001 and up 3
linde 352 06 h40d h45d h50d production site xiamen operating instructions sn c1x352x50001 and up 4
linde 352 06 h40d h45d h50d production site xiamen operating instructions sn c1x352x50001 and up 5

Linde 352-06 – H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up

$20.00

  • Type Of Manual: Operating Instructions
  • Manual ID: SN C1X352X50001 and up
  • Format: PDF
  • Size: 29.7MB
  • Number of Pages: 152
  • Serial Number:
    SN C1X352X50001 and up
Category:
  • Model List:

    • H40D
    • H45D
    • H50D
  • 1. Diesel truckH40D06, H45D06, H50D06
  • 1.1. Table of content
  • 1.2. Introduction
  • 1.2.1. Introduction
  • 1.2.2. Intended use
  • 1.2.3. Improper use
  • 1.2.4. Additional information
  • 1.2.5. Description of use and climatic conditions
  • 1.2.6. Symbols used
  • 1.2.7. Legal requirements for marketing
  • 1.3. Safety
  • 1.3.1. Safety guidelines
  • 1.3.2. Residual risks
  • 1.3.3. Stability
  • 1.3.4. In the event of tipover
  • 1.3.5. Handling consumables
  • 1.3.6. Accident prevention check
  • 1.3.7. Soot particulate filter inspection
  • 1.3.8. EMC Electromagnetic Compatibility
  • 1.3.9. Competent person
  • 1.3.10. Regulations
  • 1.3.11. Emergency exit for models with rear window
  • 1.3.12. Installing attachments
  • 1.3.13. Manually lowering the load forks
  • 1.4. Views
  • 1.4.1. General view
  • 1.4.2. Identification plates
  • 1.4.3. Warning Label Diagram
  • 1.4.4. Control elements and indicators
  • 1.4.5. Fire extinguisher installation position
  • 1.4.6. Rearview mirror installation position
  • 1.5. Operation
  • 1.5.1. Daily checks and maintenance before operation
  • 1.5.1.1. Checks and maintenance before first operation
  • 1.5.1.2. Daily checks
  • 1.5.1.3. Closing the engine cover
  • 1.5.1.4. Checking the fuel level
  • 1.5.1.5. Refuelling
  • 1.5.1.6. Fastening the seat belt
  • 1.5.1.7. Opening the seat belt
  • 1.5.1.8. Adjusting the drivers seat
  • 1.5.2. Instructions for entering and exiting the drivers cab
  • 1.5.2.1. Entering and exiting the cab
  • 1.5.3. Driving
  • 1.5.3.1. Starting the engine
  • 1.5.3.2. Switching off the engine
  • 1.5.3.3. Driving
  • 1.5.4. Steering system
  • 1.5.4.1. Steering
  • 1.5.5. Brake system
  • 1.5.5.1. Service brake
  • 1.5.6. Central control lever for lifting device and attachments
  • 1.5.6.1. Centrallever control of lifting device and attachments
  • 1.5.6.2. Tilting the lift mast forwards
  • 1.5.6.3. Tilting the mast back
  • 1.5.6.4. Lifting the fork carriage
  • 1.5.6.5. Lowering the fork carriage
  • 1.5.6.6. Operating the attachments
  • 1.5.7. Lights and switches
  • 1.5.7.1. Switching on the work light
  • 1.5.7.2. Turning on the warning lights
  • 1.5.7.3. Switching on the direction indicators
  • 1.5.8. Horn, data logger
  • 1.5.8.1. Operating the horn
  • 1.5.8.2. Data logger
  • 1.5.9. Before lifting a load
  • 1.5.10. Loading
  • 1.5.10.1. Adjusting the fork spread
  • 1.5.10.2. Loading
  • 1.5.11. Driving under load and unloading
  • 1.5.11.1. Travel with a load
  • 1.5.11.2. Unloading
  • 1.5.12. Parking the truck
  • 1.5.13. Transporting and lifting the truck
  • 1.5.13.1. Transport with lorry or lowbed semitrailer
  • 1.5.13.2. Hoisting the truck with a crane
  • 1.5.13.3. Hoisting the truck with the eyebolts
  • 1.5.14. Replacing wheels, towing jaws, removing the mast
  • 1.5.14.1. Changing wheels
  • 1.5.14.2. Trailer coupling
  • 1.5.14.3. Mast removal
  • 1.5.15. Towing instructions
  • 1.5.15.1. Towing
  • 1.5.15.2. Towing procedure
  • 1.5.15.3. Releasing the wheel drive brake pressure
  • 1.5.15.4. Opening the hydraulic system choke piston
  • 1.5.15.5. After towing
  • 1.5.15.6. Resetting the braking force
  • 1.5.16. Taking the truck out of operation
  • 1.6. Maintenance
  • 1.6.1. Summary
  • 1.6.2. Recommended fuels and oils
  • 1.6.3. Inspection and maintenance after the first 50 working hours
  • 1.6.4. Preparations
  • 1.6.4.1. Cleaning the truck
  • 1.6.5. Engine
  • 1.6.5.1. Changing the engine oil
  • 1.6.5.2. Checking the engine oil level
  • 1.6.5.3. Changing the engine oil filter
  • 1.6.5.4. Replacing the fuel filter.water trap
  • 1.6.5.5. Changing the air filter insert and checking the vacuum switch
  • 1.6.5.6. Cleaning the air filter insert
  • 1.6.5.7. Emptying the fuel filter.water trap
  • 1.6.5.8. Charging the fuel system
  • 1.6.5.9. Checking the leak resistance of the intake and exhaust pipes
  • 1.6.5.10. Cleaning and inspecting the injector
  • 1.6.5.11. Checking the condition and fastening of the engine mounts
  • 1.6.5.12. Checking or replacing the hoses in the fuel system and cooling system
  • 1.6.6. Cooling system
  • 1.6.6.1. Checking and cleaning the radiator fins
  • 1.6.6.2. Changing the coolant
  • 1.6.6.3. Checking the coolant level
  • 1.6.7. Steering axle and wheels
  • 1.6.7.1. Cleaning and lubricating the steering axle
  • 1.6.7.2. Checking the tyres for damage and foreign matter
  • 1.6.7.3. Tightening the tyre nuts
  • 1.6.8. Chassis
  • 1.6.8.1. Check the lap seat belt for condition and correct operation
  • 1.6.8.2. Checking the installation of the engine and drive axle
  • 1.6.8.3. Checking the fastening of the engine bracket, overhead guard, tilt cylinder, steering axle and wheel drive
  • 1.6.9. Control system
  • 1.6.9.1. Checking the operation of the parking brake
  • 1.6.9.2. Checking the operation of the service brake
  • 1.6.9.3. Checking the driving brake and adjusting if necessary
  • 1.6.10. Electrical components
  • 1.6.10.1. Checking battery charging status
  • 1.6.10.2. Checking the condition and tightness of cables and connections
  • 1.6.10.3. Checking fuses
  • 1.6.11. Hydraulics
  • 1.6.11.1. Replacing the breather
  • 1.6.11.2. Changing the hydraulic oil
  • 1.6.11.3. Checking the hydraulic oil level
  • 1.6.11.4. Checking the leak resistance of the hydraulics, drive axle, variable speed transmission and lines (visual inspection)
  • 1.6.11.5. Checking the preload of the double hoses (if equipped with attachments)
  • 1.6.12. Mast type
  • 1.6.12.1. Work on themast and on the front part of the truck
  • 1.6.12.2. Securing the mast against tilting back
  • 1.6.12.3. Standard mast
  • 1.6.12.4. Securing the raised standard mast
  • 1.6.12.5. Duplex mast
  • 1.6.12.6. Securing the raised duplex mast
  • 1.6.12.7. Triplex mast
  • 1.6.12.8. Securing the raised triplex mast
  • 1.7. Technical data
  • 1.7.1. H 40, H 45, H 50 models Technical datasheet Deutz TCD 2.9
  • 1.7.2. H 40, H 45, H 50 models Technical datasheet_Deutz TD 2.9
Rate this product
You may also like
Linde 1120-01 - R-matic, R10, R12, R14, R16, R20, R25 Operating Instructions SN 10.12 and up

Linde Operator Manual PDF

Linde 1120-01 – R-matic, R10, R12, R14, R16, R20, R25 Operating Instructions SN 10.12 and up

$20.00
Add to cart
Linde 1111-01 - N20VI, N20VLI Operating Instructions SN 10.09 and up SN up to W41111V00299

Linde Operator Manual PDF

Linde 1111-01 – N20VI, N20VLI Operating Instructions SN 10.09 and up SN up to W41111V00299

$20.00
Add to cart
Linde 1123-01 - R14SP, R16SP, R18SP Operating Instructions SN 12.09 and up

Linde Operator Manual PDF

Linde 1123-01 – R14SP, R16SP, R18SP Operating Instructions SN 12.09 and up

$20.00
Add to cart
Linde 1102-01 - ECR27, ECR36 Production site LMH-NA Operating Instructions

Linde Operator Manual PDF

Linde 1102-01 – ECR27, ECR36 Production site LMH-NA Operating Instructions

$20.00
Add to cart
Linde 013-01 - K13-3 Operating Instructions

Linde Operator Manual PDF

Linde 013-01 – K13-3 Operating Instructions

$20.00
Add to cart
Linde 1110-01 - N20C, N20VI, N20VLI, V08-01, V08-02 Operating Instructions SN W41110V00529 and up

Linde Operator Manual PDF

Linde 1110-01 – N20C, N20VI, N20VLI, V08-01, V08-02 Operating Instructions SN W41110V00529 and up

$20.00
Add to cart
Linde 007-01 - K10 Operating Instructions

Linde Operator Manual PDF

Linde 007-01 – K10 Operating Instructions

$20.00
Add to cart
Linde 011-01 - K Generation 1 2, K Generation 3, K Generation 4 Operating Instructions

Linde Operator Manual PDF

Linde 011-01 – K Generation 1 2, K Generation 3, K Generation 4 Operating Instructions

$20.00
Add to cart
Linde 009-01 - K15-4 Operating Instructions

Linde Operator Manual PDF

Linde 009-01 – K15-4 Operating Instructions

$20.00
Add to cart
Linde 1101-01 - EW27, EW36, EWR27, EWR36 Production site LMH-NA Operating Instructions

Linde Operator Manual PDF

Linde 1101-01 – EW27, EW36, EWR27, EWR36 Production site LMH-NA Operating Instructions

$20.00
Add to cart