Claas Torion 956 Sinus (K54) Wheel Loaders Operator Manual EN

File List:

00 0301 051 0.pdf
00 0302 814 3.pdf

00 0301 051 0.pdf:

PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 0302 814 3.pdf:

TORION 956 SINUS
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance notes
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Importance of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Requirements for all persons working with the machine
2.2.4 Children in danger
2.2.5 Hazard areas
2.2.6 Persons riding on the machine
2.2.7 Hitching the machine to the working attachment
2.2.8 Hitching of machine to a trailer
2.2.9 Structural alterations
2.2.10 Optional equipment and spare parts
2.2.11 Roll-over protective structure and falling object protective structure
2.2.12 Control of the machine while it is running
2.2.13 Operation only following proper putting into operation
2.2.14 Technical condition
2.2.15 Danger from damage to the machine
2.2.16 Respecting technical limit values
2.2.17 Keeping safety devices functional
2.2.18 Personal protective equipment
2.2.19 Wearing suitable clothing
2.2.20 Removing dirt and loose objects
2.2.21 Field of view and viewing aids
2.2.22 Preparing the machine for road travel
2.2.23 Hazards when driving on the road and on the field
2.2.24 Parking the machine safely
2.2.25 Towing or salvaging the machine
2.2.26 Unsuitable operating utilities
2.2.27 Safe handling of operating and auxiliary utilities
2.2.28 Fuel is harmful to your health
2.2.29 Refrigerant is harmful to your health
2.2.30 Environmental protection and disposal
2.2.31 Keeping the cab free of chemicals
2.2.32 Avoiding fires
2.2.33 Potentially fatal electric shock from electric overhead lines
2.2.34 Behaviour in case of voltage flashover from overhead lines and of lightning strikes
2.2.35 Electrocution by electrical system
2.2.36 Oscillations may damage your health
2.2.37 Pressurised fluids
2.2.38 Toxic exhaust gas
2.2.39 Auxiliary heater
2.2.40 Hot surfaces
2.2.41 Accessing and leaving the machine safely
2.2.42 Working on machine only after shutting it down
2.2.43 Maintenance operations and repair work
2.2.44 Lifted loads
2.2.45 Danger from welding work
2.2.46 Checking and charging the battery
2.3 Safety marking
2.3.1 Layout of safety decals
2.3.2 Warning signs on the machine
Safety decal (1)
Safety decal (2)
Safety decal (3)
Safety decal (4)
safety decal (5)
safety decal (6)
3 Machine description
3.1 Overview and method of operation
3.1.1 Overview of the wheel loader
3.1.2 Overview of the work lighting and headlights
3.2 Optional equipment
3.2.1 Coolant pre-heating*
3.2.2 Auxiliary heater* with engine pre-heater
3.2.3 Crane arm*
3.3 Identification plates and identification numbers
3.3.1 Position of the identification plate
3.3.2 Details provided on the identification plate
3.3.3 Identification plate for the auxiliary heater*
3.4 Information on the machine
3.4.1 Position of decals
3.4.2 Decals
Fire extinguisher (1)
Sound power level (2)
Working hydraulics (3)
Sling point, lifting point (4)
Lashing point (5)
Ground speed (6)
Coolant (7)
Hydraulic oil (8)
Lubrication chart (9)
Diesel fuel (10)
Load-bearing capacity table for pallet fork operation* (11)
Urea solution (12)
Cooling system (13)
Battery isolating switch (14)
Refrigerant (15)
Emergency exit (16)
Safety belt (17)
4 Operating and display elements
4.1 Cab and operator’s platform
4.1.1 Operator’s platform
4.1.2 Switches and keys
4.1.3 Multifunction handle
4.1.4 Ignition lock
4.1.5 Steering column switch
4.1.6 rotary switch*
4.2 On-board information system
4.2.1 Display
4.2.2 menu
4.2.3 Overview of symbols
5 Technical specifications
5.1 TORION
5.1.1 Dimensions with bucket
5.1.2 Dimensions with light material bucket
5.1.3 Dimensions with high dump bucket
5.1.4 Dimensions with pallet fork
5.1.5 Vibrations
Hand/arm vibrations
Whole-body vibrations
5.1.6 Sound pressure level
5.1.7 Temperature of use
5.1.8 Diesel engine 4045HB551 / 4045HLC07
CO2 emissons
EU Stage V
Stage IV
5.1.9 Chassis
Ground drive
Ground speed
5.1.10 Axles
Front axle
Rear axle
5.1.11 Tyres and tyre pressure
5.1.12 Snow chains* or guard chains*
5.1.13 Foam-filled tyres*
5.1.14 Brake
5.1.15 Steering
5.1.16 Lift arms
Working cycle time with permissible load capacity and Z kinematics
5.1.17 Load-bearing capacity table for telescoping crane arm
5.1.18 Tow hitch
5.1.19 Electric system
5.1.20 Hydraulic system
5.1.21 Cab
Driver’s seat
Heating, ventilation
Air conditioning system*
5.1.22 Ballast
5.2 Operating utilities
5.2.1 Lubricants
5.2.2 Hydraulic oil
5.2.3 Coolant
5.2.4 Fuels
5.2.5 Brake fluid
5.2.6 Refrigerant
6 Machine preparation
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.1.2 Lowering the implement to the ground
6.1.3 Switching the battery isolating switch on and off
6.1.4 Securing the machine against rolling away
Securing and leaving the machine while the diesel engine is off
Securing and leaving the machine while the diesel engine is running
6.2 Accessing workplaces and maintenance spaces
6.2.1 Accessing the workplace in the cab
6.3 Diesel engine
6.3.1 Selecting a permissible fuel and urea solution
6.3.2 Observing the fuel specification
6.3.3 Observing the urea specification
Use of the urea solution
Purity and standard of urea solution
Storage of urea solution in tanks and containers
Properties of urea solution at high and low outside temperatures
6.3.4 Refuelling the machine
Refuelling fuel
Filling up urea solution
6.4 Lift arms and working attachment
6.4.1 Removing the working attachment
6.4.2 Relieving the hydraulic pressures of the working attachment
6.4.3 Relieving the hydraulic pressures of the lift arms
6.4.4 Disconnecting the hydraulic lines
6.4.5 Unlocking and disconnecting the working attachment
6.4.6 Installing the working attachment
6.4.7 Coupling and locking the working attachment
6.4.8 Checking the working attachment lock
Visual inspection
Mechanical check
6.4.9 Connecting the hydraulic lines
Connecting the hydraulic lines
6.5 Loading the machine
6.5.1 Preparing the machine for loading with a crane
6.5.2 Loading the machine with a crane
6.5.3 Preparing the machine for lorry or railway transport
6.5.4 Driving the machine on a loading space
6.5.5 Driving the machine from a loading space
6.5.6 Lashing down the machine
Machine-specific lashing instructions
Centre of gravity of machine
Interface parameters
Lashing material capacities
Securing the machine
6.5.7 Articulation lock
Engaging the articulation lock
Releasing the articulation lock
6.6 Electric and electronic system
6.6.1 Setting the date and time
6.6.2 Setting the brightness of the display
6.6.3 Rear camera display*
7 Operation
7.1 Driving and transportation
7.1.1 Preparing for driving operation
7.1.2 Preparing road travel
7.1.3 Carry out a function check
7.1.4 Driving
Starting off the machine
7.1.5 Picking up material
7.1.6 Transporting and transferring material
7.1.7 Transporting the load on a slope
7.1.8 Driving on sloping ground
7.1.9 Emptying the working attachment
7.1.10 Handling materials with high dump buckets
7.1.11 Loading with a clamp bucket
7.1.12 Levelling
Forward levelling
Backwards levelling
7.1.13 Removing material
Removing material from the slope
Removing material from the wall
7.1.14 Loading a transport vehicle
Transport routes
Loading process
7.1.15 Working near electric overhead lines
7.1.16 Loading large rocks
7.1.17 Reversing the machine
7.1.18 Excavating material
Excavating foundations
7.1.19 Towing the machine from the hazard area
Towing with the diesel engine running
After towing
Towing with the diesel engine switched off
After towing
7.1.20 Switching off the proportional solenoid on the travel motor
7.2 Diesel engine
7.2.1 Pre-heating the coolant in the diesel engine*
7.2.2 Operating the auxiliary heater*
Activating the auxiliary heater
Bringing the drive hydraulics and working hydraulics to operating temperature
7.2.3 Starting the diesel engine
7.2.4 Switching off the diesel engine
7.2.5 Automatic diesel engine shutdown*
7.3 Chassis
7.3.1 Selecting the direction of travel
7.3.2 Selecting travel ranges
7.3.3 Driving with speed limitation*
7.3.4 Driving with adapted tractive force*
7.3.5 Switching vibration damping* on and off
7.3.6 Operating the slow speed device*
7.4 Brake
7.4.1 Braking the machine
7.4.2 Applying and releasing the parking brake
7.4.3 Releasing the parking brake mechanically
7.5 Lift arms and working attachment
7.5.1 Blocking and releasing the working hydraulics
7.5.2 Moving the lift arms and working attachment
7.5.3 Operating the working attachment with additional hydraulic functions*
7.5.4 Switch on continuous operation* of working attachment
7.5.5 Activating and deactivating the float position
7.5.6 Switching on the lifting height limit*
7.5.7 Switching on automatic bucket return*
7.5.8 Operating the pallet fork*
Adjusting the fork arms on the fork carrier
Working with the pallet fork
7.5.9 Operating the telescoping crane arm*
Installing the crane arm
Adjusting the crane arm
Working with the crane arm
7.5.10 Emergency operation of the lift arms
7.6 Electric and electronic system
7.6.1 Engaging the parking position
7.6.2 Switching the lighting on and off
Switching the dipped beam on and off
Switching the main beam on and off
Switching the work lights on and off
Switching the warning beacon* on and off
7.6.3 Switching the reversing warning systems* on and off
Reversing horn
Flashlight
Warning beacon at the rear
Warning beacon on the cab roof
7.7 Cab and operator’s platform
7.7.1 Adjusting the driver’s seat
Driver’s seat, mechanical suspension*
Air-suspended driver’s seat with low-frequency suspension*
Adjusting the arm rest
7.7.2 Applying the seat belt
7.7.3 Adjusting the steering column
7.7.4 Adjusting the internal and external mirrors
7.7.5 Adjusting heater, ventilation and air conditioner*
Setting the temperature
Adjusting the air supply
Setting the fan
Switching the air conditioner* on and off
7.7.6 Switching the rear window heating and external mirror heating* on and off
7.7.7 Actuating the windscreen washer
7.7.8 Switching the cab interior lighting on and off
7.7.9 Adjusting the sun visor
7.7.10 Opening and closing the cab window
7.7.11 Opening the emergency exit
7.8 Central lubrication system
7.8.1 Central lubrication system*
Starting intermediate lubrication
8 Faults and remedies
8.1 Overview
8.1.1 Warnings and fault messages
8.1.2 Overview of fault codes
8.1.3 Overview of warning symbols
Warning symbols for the SCR system
8.2 Diesel engine
8.2.1 Overview of diesel engine faults
8.3 Electric and electronic system
8.3.1 Jump-start 12 V
Charging the batteries
8.3.2 Replacing fuses
Fuse board in the cab
Fuses in engine compartment
8.4 Central lubrication system
8.4.1 Overview of faults on the central lubrication system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.1.2 After the first 50 operating hours
9.1.3 Every 50 operating hours
9.1.4 After the first 500 operating hours
9.1.5 Every 500 operating hours
9.1.6 Every 1000 operating hours
9.1.7 Every 2 years
9.1.8 Every 2000 operating hours
9.1.9 Every 3000 operating hours
9.1.10 Every 4000 operating hours
9.1.11 Every 4500 operating hours
9.1.12 Every 5500 operating hours
9.1.13 Every 6000 operating hours
9.1.14 Every 10000 operating hours
9.2 Lubrication plan
9.2.1 Grease points, grease every 10 working hours
9.2.2 Lubricate lubrication points every 50 working hours
9.2.3 Grease points, grease every 500 working hours
9.3 Preparing maintenance
9.3.1 Carrying out maintenance
9.3.2 Moving the machine to the maintenance position
Maintenance position I
Maintenance position II
9.3.3 Opening the service hatches
Opening and closing the radiator cover
Opening and closing the service cover
9.4 Diesel engine
9.4.1 Cleaning the diesel engine
9.4.2 Checking the diesel engine oil level
Checking the oil level on the dipstick
Topping up oil
9.4.3 Draining condensed water and sediments from the fuel tank
9.4.4 Draining condensed water from the fuel pre-filter
9.4.5 Bleeding the fuel system
9.4.6 Cleaning the air filter lid and dust discharge valve
9.4.7 Cleaning the air filter main element
Removing the filter element
Cleaning the filter element
Cleaning the filter housing and the cover
Installing the filter element
9.4.8 Replacing the air filter safety cartridge
9.4.9 Reversing the fan*
9.4.10 Checking the coolant level
9.4.11 Cleaning the cooling system
9.4.12 Regenerating the diesel particulate filter
Setting regeneration mode
Starting regeneration automatically
Suppressing regeneration
Starting regeneration manually
9.5 Chassis
9.5.1 Checking the wheels, tyres and the tyre pressure
9.5.2 Checking the tyre pressure
9.5.3 Checking the tightening torque of wheel nuts
9.6 Brake
9.6.1 Checking the function and effect of the service brake
9.6.2 Checking the function and effect of the parking brake
9.6.3 Checking the brake fluid level
Checking the brake fluid level
Topping up brake fluid
9.7 Steering
9.7.1 Checking the steering system function
9.8 Lift arms and working attachment
9.8.1 Checking the function of the tool carrier
9.9 Hydraulic system
9.9.1 Checking the hydraulic oil level
Checking the hydraulic oil level
Topping up hydraulic oil
9.9.2 Checking the hydraulic hoses
Marking of hydraulic hoses
9.10 Electric and electronic system
9.10.1 Checking the lights and horn
9.11 Cab and operator’s platform
9.11.1 Cleaning the cab
Cleaning inside the cab
Cleaning the rear window
9.11.2 Cleaning or replacing the cab air filter
9.11.3 Checking the condition and function of the seat belt
9.11.4 Topping up windscreen washer
9.11.5 Checking the function of the windscreen washer system
9.11.6 Cleaning and maintaining the cab seals
9.11.7 Checking the heater and air conditioning system
9.12 Central lubrication system
9.12.1 Checking the grease level in the central lubrication system*
Checking the filling level
Topping up grease
9.12.2 Checking the tightness and function of the central lubrication system*
9.13 Assembled parts/Machine housing
9.13.1 Checking the fire extinguishers
9.13.2 Checking the proper condition of the machine
9.13.3 Removing loose parts and pollution from the machine
9.13.4 Cleaning the machine
Prior to cleaning
Cleaning
After cleaning
9.13.5 Cleaning and maintaining the seals of the service hatches
9.13.6 Storing the machine
10 Putting out of operation and disposal
10.1 General information
10.1.1 Removal from service and disposal
11 EC declaration of conformity
11.1 TORION
11.1.1 EC declaration of conformity (sample)
11.1.2 EC declaration of conformity (sample)