bomag bw 161 adh 4 bw 202 ad 4 bw 203 ad 4 tandem vibratory roller operating and maintenance instructions 00806301 1

bomag bw 161 adh 4 bw 202 ad 4 bw 203 ad 4 tandem vibratory roller operating and maintenance instructions 00806301 2

bomag bw 161 adh 4 bw 202 ad 4 bw 203 ad 4 tandem vibratory roller operating and maintenance instructions 00806301 3

bomag bw 161 adh 4 bw 202 ad 4 bw 203 ad 4 tandem vibratory roller operating and maintenance instructions 00806301 4

bomag bw 161 adh 4 bw 202 ad 4 bw 203 ad 4 tandem vibratory roller operating and maintenance instructions 00806301 5

Bomag BW 161 ADH-4, BW 202 AD-4, BW 203 AD-4 Tandem Vibratory Roller Operating and Maintenance Instructions 00806301

$20.00

Type Of Manual: Operating and Maintenance Instructions
Manual ID: 00806301
Format: PDF
Size: 6.7MB
Number of Pages: 154
Serial Number:
861920801001 and up
861920811001 and up
861920821001 and up

Category: Bomag Operator Manual PDF

Model List:
- BW 161 ADH-4 Tandem Vibratory Roller
- BW 202 AD-4 Tandem Vibratory Roller
- BW 203 AD-4 Tandem Vibratory Roller

1. Table of contents
2. Foreword
3. Technical data
4. Safety regulations
5. Indicators and Controls
5.1. General notes
5.2. Description of indicators and control elements
6. Operation
6.1. General
6.2. Tests before taking into operation
6.3. Starting the engine
6.4. Starting with jump wires
6.5. Driving the machine
6.6. Stopping the machine, operating the parking brake
6.7. Shut down the engine
6.8. Switching the vibration on and off
6.9. Operating the crabwalk
6.10. Switching the pressure sprinkling system on and off
6.11. Sprinkling of edge cutterOptional equipment
6.12. Actuating the emergency stop switch
6.13. Adjusting the drivers seat
6.14. Operating the heating/air conditioning systemOptional equipment
6.15. Opening or closing the cabin window
6.16. Towing
6.17. Loading/transport
7. Maintenance
7.1. General notes on maintenance
7.2. Fuels and lubricants
7.3. Fuels, lubricants and filling capacities
7.4. Runningin instructions
7.5. Maintenance table
7.6. Every 10 operating hours
7.6.1. Checking the engine oil level
7.6.2. Checking the fuel level
7.6.3. Check the hydraulic oil level
7.6.4. Check the coolant level
7.6.5. Check the water level
7.7. Every 250 operating hours
7.7.1. Change the fuel filter cartridge
7.7.2. Replacing the fuel prefilter cartridge, bleeding the fuel system
7.7.3. Check, clean radiator, fuel cooler, hydraulic oil cooler and intercooler
7.7.4. Check the oil level in vibrator shaft tube
7.8. Every 500 operating hours
7.8.1. Changing engine oil and oil filter cartridge
7.8.2. Check the antifreeze concentration and the condition of the coolant
7.8.3. Service the air conditioningOptional equipment
7.8.4. Cleaning the circulation air filter for the heatingOptional equipment
7.8.5. Battery service, checking the main battery switch
7.9. Every 1000 operating hours
7.9.1. Change the oil in drum drive gear
7.9.2. Checking, tensioning, lubricating the steering chain
7.9.3. Check the engine mounts
7.9.4. Checking the Vbelt, tighten, if necessary replace the Vbelt
7.9.5. Check, adjust the valve clearance
7.9.6. Changing the oil in the vibrator shaft tube
7.9.7. Check the ROPS
7.9.8. Check the travel control
7.10. Every 2000 operating hours
7.10.1. Changing hydraulic oil and breather filter
7.10.2. Changing the hydraulic oil filter
7.10.3. Greasing the articulated joint
7.10.4. Changing the coolant
7.11. Every 3000 operating hours
7.11.1. Replace the injection valves
7.12. As required
7.12.1. Check, clean, change the combustion air filter
7.12.2. Checking, cleaning the water separator
7.12.3. Clean water tank and water filter
7.12.4. Water sprinkler system, maintenance in the event of frost
7.12.5. Fill the provision tank for the windscreen washer system
7.12.6. Adjusting the scrapers
7.12.7. Change the fresh air filter in the cabin
7.12.8. Tightening torques
7.12.9. Engine conservation
8. Trouble shooting
8.1. General notes
8.2. Engine
9. Disposal
9.1. Final shutdown of machine

Rate this product