bomag bw 226 dh 4 bw 226 pdh 4 single drum roller operating and maintenance instructions 00804041 1

bomag bw 226 dh 4 bw 226 pdh 4 single drum roller operating and maintenance instructions 00804041 2

bomag bw 226 dh 4 bw 226 pdh 4 single drum roller operating and maintenance instructions 00804041 3

bomag bw 226 dh 4 bw 226 pdh 4 single drum roller operating and maintenance instructions 00804041 4

bomag bw 226 dh 4 bw 226 pdh 4 single drum roller operating and maintenance instructions 00804041 5

Bomag BW 226 DH-4, BW 226 PDH-4 Single Drum Roller Operating and Maintenance Instructions 00804041

$20.00

Type Of Manual: Operating and Maintenance Instructions
Manual ID: 00804041
Format: PDF
Size: 4.3MB
Number of Pages: 150
Serial Number:
10158288 and up
10158289 and up

Category: Bomag Operator Manual PDF

Model List:
- BW 226 DH-4 Single Drum Roller
- BW 226 PDH-4 Single Drum Roller

1. BW 226 DH4 / PDH4
2. Single drum roller
3. General notes
4. Description of indicators and control elements
5. Display and control elements BTM
6. Description of indicating and control elements BTM
7. Line diagram (EVIB)
8. Description of line diagram (EVIB)
9. Bar diagram (EVIB)
10. General notes
11. Tests before taking into operation
12. Disarming the antitheft protection
13. Starting the engine
14. Starting with jump wires
15. Driving the machine
16. Switching the vibration on and off
17. Operating the parking brake, stopping the machine
18. Shut down the engine
19. Changing the LCDdisplay
20. Emergency exit
21. Adjusting the seat
22. Operating the hood
23. Towing in case of an engine failure
24. Transport
25. BVC/BTM05 settings before startup
26. Measuring pass with BTM
27. Finishing compaction of a track
28. Printing measuring data after completing compaction
29. Changing the paper roll in the measuring value printer
30. Changing the printer ribbon in the measuring value printer
31. General notes on maintenance
32. Fuels and lubricants
33. Table of fuels and lubricants
34. Runningin instructions
35. Maintenance chart
36. Check the engine oil level
37. Check, clean the water separator
38. Check the fuel level
39. Check the hydraulic oil level
40. Check the coolant level
41. Checking the dust separator on the oil bath air filter
42. Grease the articulated joint
43. Checking the tire pressure
44. Clean the cooling fins on engine and hydraulic oil cooler
45. Check the oil level in the drive axle
46. Check the oil level in the wheel hubs
47. Check the oil level in the axle reduction gear
48. Check the oil level in the drum reduction gear
49. Check the oil level in the vibration bearings
50. Changing engine oil and oil filter cartridges
51. Change the fuel filter cartridge
52. Draining the sludge from the fuel tank
53. Service the battery
54. Change the fuel prefilter cartridge
55. Checking, replacing the refrigerant compressor V belt
56. Service the air conditioning
57. Adjusting the valve clearance
58. Checking / replacing the ribbed Vbelt
59. Check the engine mounts
60. Checking the engine pillow blocks
61. Change the oil in the drive axle
62. Changing the oil in the axle reduction gear
63. Change the oil in the wheel hubs
64. Change the oil in the drum reduction gear
65. Change the oil in the vibration bearings
66. Tightening the fastening of the axle on the frame
67. Tighten the wheel nuts
68. Check the ROPS
69. Cleaning the oil bath air filter
70. Changing hydraulic oil and breather filter
71. Changing the hydraulic oil filter
72. Change the coolant
73. Replacing the crank case pressure ventilation valve
74. Service the combustion air filter
75. Adjust the scrapers
76. Adjust the parking brake
77. Change the tires
78. Change the fresh air filter in the cabin
79. Tightening torques
80. Engine conservation
81. General notes
82. Reading out faults BVC/ BTM05
83. Engine problems
84. Preparations
85. Cabin assembly
86. Final function tests and checks

Rate this product