Claas Axos 340-310 (B22) Tractors Operator Manual EN

File List:

00 0301 051 0.pdf
00 0303 482 0.pdf
00 1163 914 2.pdf
00 1169 984 0.pdf
00 1171 030 0.pdf
00 1405 164 7.pdf

00 0301 051 0.pdf:

PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 0303 482 0.pdf:

PROFI CAM 4
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Structural changes
2.2.3 Optional equipment and spare parts
2.2.4 Operation only following proper putting into operation
2.2.5 Technical status
2.2.6 Respecting technical limit values
Respecting technical limit values
2.2.7 Hazards when driving on roads and fields
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Identification plates
3.3 Information on the product
3.3.1 CE marking
4 Operating and display elements
4.1 Camera system
4.1.1 Camera system monitor
4.1.2 CEBIS
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electric and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Putting out of operation and disposal
10.1 General information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 1163 914 2.pdf:

AXOS 340
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Using the operator’s manual
Important information concerning this operator’s manual
Structure based on tractor sub-assemblies
Search and find
Direction indications
Specific terminology
Optional and additional equipment
1.1.2 Symbols and instructions
Text and illustrations
Highlighting dangers and warnings
1.1.3 Validity of the operator’s manual
1.1.4 Transferring the tractor to a third party
1.1.5 Technical information
2 Safety
2.1 Safety rules
2.1.1 Appropriate use
2.1.2 Inappropriate use
2.1.3 European regulation
2.1.4 Safety and accident prevention instructions
2.1.5 Driving the tractor
2.1.6 Checking the condition of the tractor
2.1.7 Climbing into the cab and out of the tractor
Climbing into the tractor
Climbing out of the tractor
2.1.8 Precautions to be taken before starting up
2.1.9 Cab
Safety structure of the cab
Polluted environment
2.1.10 Hitching implements
2.1.11 Adjustments and maintenance work
Special notes on mounting the tractor on axle stands
2.1.12 Using the front and rear power take-off
2.1.13 Fuel
2.1.14 Engine coolant
2.1.15 Air conditioning
2.1.16 Electrical system
2.1.17 Specific recommendations for this tractor
2.1.18 Forest applications
2.1.19 Stationary working
2.1.20 Twin wheels
2.2 Safety decals on the tractor
2.2.1 General advice regarding the safety markings
2.2.2 Warning symbols
3 Tractor description
3.1 Overview
3.1.1 Front left-hand view
3.1.2 Rear right 3/4 view
3.2 Identification plates and vehicle identification number
3.2.1 Tractor identification plate
Tractor identification number
Tractor regulation type
Tractor serial number
3.2.2 Additional cab identification plate
3.2.3 Tractor power label
3.2.4 Engine identification plate
3.2.5 Cab identification plate
4 Operating and display elements
4.1 Cab and operator’s platform
4.1.1 Driving position
4.1.2 Dashboard
4.1.3 TCE 9 electrohydraulic rear linkage controls
4.1.4 Instrument panel
4.1.5 Transmission display
4.1.6 Manual air conditioning
4.1.7 Driving position controls
Indicator lights and horn
Warning beacon and hazard warning lights
Front windscreen washer and wiper
4.1.8 Cab top controls
Work lights
Rear screen wiper and washer
4.1.9 Switch box electrical socket
4.1.10 Hydraulic controls
4.2 Electric and electronic system
4.2.1 External controls (TCE9 electrohydraulic rear linkage)
5 Technical specifications
5.1 AXOS 340
5.1.1 Dimensions
5.1.2 Weight
5.1.3 Engine
5.1.4 Gearbox
5.1.5 Travel speeds
5.1.6 Rear axle
5.1.7 Table of rear tracks
5.1.8 Tyre combinations
5.1.9 Tyre load capacity and inflation pressure
Front tyre
Rear tyres
5.1.10 Brakes
5.1.11 Direction
5.1.12 Rear linkage
5.1.13 Rear power take-off
5.1.14 Hydraulic circuits
5.1.15 Hydraulic control valve combinations
5.1.16 Electrical circuit
5.1.17 Cab specifications
Sound level heard by the driver (according to European Directive 2009/76)
Sound level heard by a passer-by (according to European Directive 2009/63 Annex VI)
5.1.18 Seat vibration level
5.1.19 Load capacities
5.1.20 Maximum authorised tow weights
5.1.21 Ballast
5.1.22 Lubricants/Hydraulic oil
5.1.23 Engine coolant
5.1.24 Air conditioning refrigerant
6 Tractor preparation
6.1 Engine
6.1.1 Fuel
Quality requirement
Special notes on biofuels
Handling fuel
6.1.2 Topping up the fuel
6.2 Frame
6.2.1 Adjusting the rear axle track
6.2.2 General information about the tyres
6.2.3 Inflation pressure
Effect on soil compaction
Effect on consumption
6.2.4 Specifications
Load index
Speed symbol
6.3 Brake
6.3.1 Coupling the brake pedals
6.4 Steering
6.4.1 Steering column
6.5 Rear power lift
6.5.1 Axle stands
6.5.2 Top link
6.5.3 Stabilisers
6.5.4 External controls
With TCE9 electrohydraulic rear linkage
With mechanically controlled rear linkage
6.6 Rear power take-off
6.6.1 Replacing the rear power take-off fitting
Removing the rear power take-off fitting
Refitting the rear power take-off fitting
6.7 Rear hydraulic system
6.7.1 Rear pressure taps
Connecting/Disconnecting the pressure connectors
Free return to hydraulic tank
6.7.2 Single/double action setting
6.7.3 Motorized flow controller
6.8 Electric and electronic system
6.8.1 Electrical sockets
Switch box electrical socket
External electrical socket
6.8.2 Adjust the dipped beam headlights
Adjusting the engine bonnet dipped beam headlights
Adjusting the cab dipped beam headlights
6.9 Cab and operator’s platform
6.9.1 Adjusting the driver’s comfort seat
6.9.2 Installing a control box in the cab
6.9.3 Routing the cables of a control box
6.9.4 Storage
6.10 Assembly parts and machine body
6.10.1 Engine bonnet
Opening the engine bonnet
Closing the engine bonnet
6.10.2 Ballast
6.10.3 Ballast water
6.10.4 Balancing the tractor with mounted implements
Summary table
6.10.5 Installing additional equipment
6.10.6 Tool box
6.11 Transport of the tractor
6.11.1 Transporting the tractor
6.11.2 Loading the tractor
7 Operation
7.1 Engine
7.1.1 Running in
7.1.2 Starting the engine
Preliminary operations
Start up
7.1.3 Accelerator pedal
7.1.4 Hand accelerator
7.1.5 Engine stops
7.2 Transmission, clutch and driveshaft
7.2.1 Selecting the tractor’s direction of travel
7.2.2 Clutch pedal
7.2.3 Gear selection
7.2.4 Gear range selection
7.2.5 Differential lock
7.3 Brake
7.3.1 Service brakes
7.3.2 Parking brake (auxiliary and parking brake)
7.4 Mechanical rear linkage
7.4.1 Position control
7.4.2 Draft control
7.4.3 Mixed control
7.5 Electronic rear linkage
7.5.1 Recommendations
7.5.2 Road transport safety
7.5.3 Unlocking the rear linkage
7.5.4 Selecting modes
7.5.5 Checking the rear linkage position
7.5.6 Checking the rear linkage force
7.5.7 Rear linkage external controls
7.5.8 Rear linkage upper stop
7.5.9 Rear linkage lower link lowering speed
7.5.10 Rear linkage transport damper
7.6 Rear power take-off
7.6.1 Power take-off speed selection
7.6.2 Rear power take-off engagement
Procedure for setting off again
7.6.3 Stationary working
7.7 Rear hydraulic system
7.7.1 Association between the controls and the rear pressure taps
7.7.2 Using the auxiliary hydraulic control valve linear controls
7.7.3 Stationary working
7.8 Electric and electronic system
7.8.1 Manual circuit breaker
7.9 Cab and operator’s platform
7.9.1 Instrument panel display
Setting the time on the clock
7.9.2 Heating – Ventilation – Manual air conditioning
Adjusting the ventilated air flow rate
Adjusting the ventilated air temperature
Managing thetilation direction
Activating the air conditioning function
Activating the air recirculation function
7.9.3 Overhead light
8 Faults and remedies
8.1.1 Primary alarms
8.1.2 Secondary alarms
8.1.3 Other alarms
8.2 Engine
8.2.1 Faults caused by a low fuel level
8.2.2 Starting assistance
Assisted starting by towing
Assisted starting using an external battery
8.3 Frame
8.3.1 Fitting a jack
8.3.2 Replacing a wheel
Rear wheels
Front wheel
8.3.3 Towing the tractor
Towing with the engine stopped
Towing with the engine running
8.4 Electric and electronic system
8.4.1 Fuses and relays
Preheating relay and fuse
Fuse box
8.4.2 Instrument panel calibration
8.4.3 Overview of the lights
8.5.1 Cab air conditioning fault
8.6 Assembly parts and machine body
8.6.1 Frontal impact on the tractor
9 Maintenance
9.1 Maintenance Information
9.1.1 Personal protective equipment
9.1.2 Immobilise the tractor and ensure it is made safe
9.1.3 Cleaning and tidying risk areas
9.1.4 Welding advice
9.1.5 Protective devices on the tractor
9.1.6 Engine
Alternator
Engine lubrication
Engine cooling
Engine belts
9.1.7 Wheels and tyres
9.1.8 Braking system
9.1.9 Pneumatic circuit
9.1.10 Direction
9.1.11 Implements driven by a power take-off
9.1.12 Air conditioning
9.1.13 Hydraulic circuit
9.1.14 Electrical system
9.1.15 Energy accumulators
9.1.16 Spare parts
9.1.17 Greasing
9.1.18 Cleaning and protection
9.1.19 Working at height
9.1.20 Handling heavy components
9.1.21 Maintenance operations under the cab or the platform
9.1.22 Lifting the front of the tractor
9.2 Maintenance interval overview
9.2.1 Handling maintenance intervals
9.2.2 After the first 10 hours
9.2.3 After first 100 hours
9.2.4 After the first 500 hours
9.2.5 Every 10 hours
9.2.6 Every 50 hours
9.2.7 Every 50 hours or every week
9.2.8 Every 100 hours
9.2.9 Every month
9.2.10 Every 500 hours
9.2.11 Every 500 hours or every year
9.2.12 Every 1000 hours
9.2.13 Every 1500 hours
9.2.14 Every 1500 hours or every year
9.2.15 Every 3000 hours
9.2.16 Every 4500 hours or every 5 years
9.3 Lubrication plan
9.3.1 Lubrication points – 50 hrs
9.3.2 Greasing points – 500 hrs
9.4 Maintenance engine
9.4.1 Adjust the valve rockers
9.4.2 Eliminate water in the fuel
9.4.3 Replace the fuel filters
Pre-filter
Pre-filter
9.4.4 Check the pressure rating of the injectors
9.4.5 Bleeding air from the injection circuit
9.4.6 Check the injection system connections
9.4.7 Check the engine oil level
9.4.8 Change the engine oil
9.4.9 Replace the engine oil filter cartridge
9.4.10 Checking the coolant level
9.4.11 Check the cooling system seal
9.4.12 Changing the engine coolant
9.4.13 Cleaning the coolers
9.4.14 Check the air intake seal
9.4.15 Eliminating dust accumulated inside the engine air filter housing
9.4.16 Clean the engine air filter
9.4.17 Replace the engine air filter
9.4.18 Replace the engine air filter and the safety cartridge
9.5 Maintenance operations gearbox
9.5.1 Check the clutch pedal clearance
9.5.2 Checking the rear axle final drive oil level
9.5.3 Change the rear axle final drive oil
9.6 Maintanance operations chassis
9.6.1 Check the tyre inflation pressure
9.6.2 Check the tightness of the wheel discs on the hubs
Rear wheels
Front wheel
9.6.3 Checking the tightness of the front wheel
9.6.4 Checking the tightness of the connecting bolts
9.7 Maintenance operations brake
9.7.1 Check the service brake clearance
9.7.2 Checking the parking brake clearance
9.8 Rear power take-off maintenance operations
9.8.1 Check the mechanical power take-off clutch clearance
9.9 Maintenance operations hydraulic
9.9.1 Check the hydraulic circuit
9.9.2 Check the transmission/hydraulic oil level
9.9.3 Change the hydraulic/transmission oil
9.9.4 Replace the transmission/hydraulic circuit filter cartridges
High-pressure filter
Bleeding air from the transmission/hydraulic circuit
9.9.5 Clean the hydraulic valve filter
9.9.6 Replace the rear axle breather
9.9.7 Check the rear linkage hydraulic connectors
9.9.8 Draining the oil collection vessel
9.10 Maintenance electrical / electronics
9.10.1 Clean and grease the battery terminals
9.11 Maintenance Cab / Operator’s platform
9.11.1 Clean the cab air filter
9.11.2 Replace the cab air filter
9.11.3 Clean the air recirculation filter in the cab
9.11.4 Changing the air recirculation filter in the cab
9.11.5 Activating the air conditioning
9.11.6 Check the screen washer fluid level
9.12 Maintenance operations machine body
9.12.1 Clean the radiator grilles
9.13 Storage
9.13.1 Storage instructions
Long-term storage
Recommissioning
10 Service
10.1 AXOS 340
10.1.1 Spare parts and technical questions
11 Putting out of operation and disposal
11.1 Information on the machine
11.1.1 Scrapping and waste disposal
12 Technical terms and abbreviations
12.1 Technical terms and abbreviations
12.1.1 Technical terms
12.1.2 Abbreviations

00 1169 984 0.pdf:

Sensor case for tractors Stage IIIB, IV and VSensor case for tractors Stage IIIB, IV and VSensor case for Stage IIIB, IV and V tractors
Contents
1 Sensorkoffer – Sensor case – Sensor suitcase – Stage IIIB, IV & V
1.1 Auflistung Kofferinhalt
1.1 Listing case content
1.1 Presentation of the contents of the suitcase

00 1171 030 0.pdf:

AXOS 340-330-320-310
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Using the operator’s manual
Important information concerning this operator’s manual
Structure based on tractor sub-assemblies
Search and find
Direction indications
Specific terminology
Optional and additional equipment
1.1.2 Symbols and instructions
Text and illustrations
Highlighting dangers and warnings
1.1.3 Validity of the operator’s manual
1.1.4 Transferring the tractor to a third party
1.1.5 Technical information
2 Safety
2.1 Safety rules
2.1.1 Appropriate use
2.1.2 Inappropriate use
2.1.3 European regulation
2.1.4 Safety and accident prevention instructions
2.1.5 Driving the tractor
2.1.6 Checking the condition of the tractor
2.1.7 Climbing into the cab and out of the tractor
Climbing into the tractor
Climbing out of the tractor
2.1.8 Passenger seat
2.1.9 Precautions to be taken before starting up
2.1.10 Cab
Safety structure of the cab
Polluted environment
2.1.11 Hitching implements
2.1.12 Adjustments and maintenance work
Special notes on mounting the tractor on axle stands
2.1.13 Using the front and rear power take-off
2.1.14 Fuel
2.1.15 Engine coolant
2.1.16 Air conditioning
2.1.17 Electrical system
2.1.18 Applications with front loaders
2.1.19 Forest applications
2.1.20 Stationary working
2.1.21 Implements operating at great depth
2.1.22 Twin wheels
2.2 Safety decals on the tractor
2.2.1 General advice regarding the safety markings
2.2.2 Warning symbols
2.3 Safety devices
2.3.1 Wheel chock
3 Tractor description
3.1 Overview
3.1.1 Front left-hand view
3.1.2 Rear right 3/4 view
3.2 Identification plates and vehicle identification number
3.2.1 Tractor identification plate
Tractor identification number
Tractor regulation type
Tractor serial number
3.2.2 Tractor power label
3.2.3 Engine identification plate
3.2.4 Front axle identification plate
3.2.5 Front linkage identification plate
3.2.6 Front power take-off identification plate
3.2.7 Pick-up hitch identification plate
3.2.8 Cab identification plate
Situation 1
Situation 2
3.2.9 Additional cab identification plate
4 Operating and display elements
4.1 Cab and operator’s platform
4.1.1 Driving position
4.1.2 Dashboard
4.1.3 TCE 9 electrohydraulic rear linkage controls
4.1.4 Instrument panel
4.1.5 Transmission display
4.1.6 Manual air conditioning
4.1.7 Driving position controls
Indicator lights and horn
Depending on equipment: Low/high beam toggle
Warning beacon and hazard warning lights
Windscreen washer and wiper
4.1.8 Cab top controls
Work lights
Rear screen wiper and washer
4.1.9 Switch box electrical socket
4.2 Hydraulic system
4.2.1 Hydraulic controls
4.3 Electric and electronic system
4.3.1 External controls (TCE9 electrohydraulic rear linkage)
5 Technical specifications
5.1 AXOS 340 – 310
5.1.1 Dimensions
5.1.2 Engine
5.1.3 Weight
5.1.4 Gearbox
5.1.5 Ground speeds
5.1.6 Electrohydraulic doubler and 5-speed gearbox
5.1.7 Mechanical doubler and 5-speed gearbox
5.1.8 5-speed gearbox – Without doubler
5.1.9 Rear axle
5.1.10 Front axle
5.1.11 Brakes
5.1.12 Steering
5.1.13 Rear linkage
5.1.14 Front linkage
5.1.15 Rear hitches
5.1.16 Rear power take-off
5.1.17 Front power take-off
5.1.18 Hydraulic circuit
5.1.19 Hydraulic control valve combinations
5.1.20 Electrical circuit
5.1.21 Cab specifications
Noise level heard by the driver (according to European Directive 2009/76)
Noise level heard by a passer-by (according to European Directive 2009/63 Annex VI)
5.1.22 Seat vibration level
5.1.23 Ballast
5.1.24 Maximum authorised tow weights
5.1.25 Load capacities
5.1.26 Lubricants/Hydraulic oil
5.1.27 Engine coolant
5.1.28 Air conditioning refrigerant
6 Tractor preparation
6.1 Engine
6.1.1 Fuel
Quality requirement
Special notes on biofuels
Handling fuel
6.1.2 Topping up the fuel
6.1.3 Cold starting assistance
Engine coolant heater
Fuel heater
6.2 Frame
6.2.1 AXOS 330310: Table of front track widths
Rims with spacers
Rims with fixed wheel disc
6.2.2 AXOS 330310: Table of rear tracks
Rims with spacers
Rims with fixed wheel disc
6.2.3 AXOS 340: Table of front track widths
Rims with spacers
Rims with fixed wheel disc
6.2.4 AXOS 340: Table of rear tracks
Rims with spacers
Rims with fixed wheel disc
6.2.5 Tyre combinations
6.2.6 Setting the front axle track
6.2.7 Adjusting the rear axle track
6.2.8 Adjusting the steering stops
Adjustment
6.2.9 General information about the tyres
6.2.10 Inflation pressure
Effect on soil compaction
Effect on consumption
6.2.11 Specifications
Load index
Speed symbol
6.3 Brake
6.3.1 Coupling the brake pedals
6.3.2 Trailer hydraulic brake
6.3.3 Trailer air brake
6.4 Steering
6.4.1 Steering column
6.5 Rear power lift
6.5.1 Axle stands
6.5.2 Top link
6.5.3 Stabilisers
Mechanical stabilisers
6.5.4 Automatic hitches
6.5.5 External controls
With TCE9 electrohydraulic rear linkage
With mechanically controlled rear linkage
6.5.6 Hitching/unhitching an implement
Hitching recommendations
Hitching
Unhitching
6.6 Front power lift
6.6.1 Front linkage – Preliminary operations
6.6.2 Mechanical top link
6.6.3 Lower connecting rods
6.6.4 Automatic hitches
6.6.5 Hitching and unhitching an implement
Hitching recommendations
Hitching
Unhitching
6.7 Front loader
6.7.1 Fitting an adapter frame for the front loader
6.8 Rear power take-off
6.8.1 Replacing the rear power take-off fitting
Removing the rear power take-off fitting
Refitting the rear power take-off fitting
6.8.2 Hitchg and unhitching an implement
Connecting and disconnecting the rear power take-off universal drive shaft
Hitching
Unhitching
6.9 Front power take-off
6.9.1 Hitch and unhitch an implement
6.10 Hitch
6.10.1 Recommendatis
6.10.2 Calculating the maximum tow load (not including CUNA clevis)
6.10.3 Hitching/unhitching an implement
Hitching
Unhitching
6.10.4 Clevis drawbars
Manual locking clevis
Automatic locking clevis
6.10.5 Swinging drawbar
Safety device
Tightening the clevis
6.10.6 Pick-up hitch
6.11 Rear hydraulic system
6.11.1 Rear pressure taps
Connecting/Disconnecting the pressure connectors
Free return to hydraulic tank
6.11.2 Single/double action setting
6.12 Electric and electronic system
6.12.1 Electrical sockets
Switch box electrical socket
External socket
6.12.2 Adjust the dipped beam headlights
Adjusting the engine bonnet dipped beam headlights
Adjusting the cab dipped beam headlights
6.13 Cab and operator’s platform
6.13.1 Adjusting the rear-view mirrors
6.13.2 Adjusting the driver’s comfort seat
6.13.3 Adjusting the pneumatic driver’s seat (with and without horizontal suspension)
6.13.4 Passenger seat
6.13.5 Installing a control box in the cab
6.13.6 Routing the cables of a control box
6.13.7 Storage
6.14 Assembly parts and machine body
6.14.1 Ballast
6.14.2 Ballast water
6.14.3 Balancing the tractor with mounted implements
Summary table
6.14.4 Fitting and removing the front weights
6.14.5 Opening and closing the bonnet
Opening the engine bonnet
Closing the engine bonnet
6.14.6 Toolbox
6.15 Transport of the tractor
6.15.1 Transporting the tractor
6.15.2 Loading the tractor
7 Operation
7.1 Engine
7.1.1 Running in
7.1.2 Starting the engine
Preliminary operations
Start up
Recommendations
7.1.3 Accelerator pedal
7.1.4 Hand accelerator
7.1.5 Engine stops
7.2 Transmission, clutch and driveshaft
7.2.1 Reverser neutral
7.2.2 Selecting the tractor’s direction of travel
Revershift electrohydraulic direction reverser
Mechanical drive reverser
Recommendations
7.2.3 Clutch pedal
7.2.4 Speed selection
Gear lever switch
7.2.5 Gear range selection
7.2.6 Doubler
Mechanical doubler
Electrohydraulic doubler
7.2.7 Creeper range
7.2.8 Differential lock
7.3 Chassis
7.3.1 Front axle engagement
Automatic mode
Permanent mode
7.4 Brake
7.4.1 Service brakes
7.4.2 Parking brake (auxiliary and parking brake)
7.5 Mechanical rear linkage
7.5.1 Position control
7.5.2 Draft control
7.5.3 Mixed control
7.5.4 External controls
7.6 Electronic rear linkage
7.6.1 Recommendations
7.6.2 Road transport safety
7.6.3 Unlocking the rear linkage
7.6.4 Selecting modes
7.6.5 Checking the rear linkage position
7.6.6 Checking the rear linkage force
7.6.7 Rear linkage external controls
7.6.8 Rear linkage upper stop
7.6.9 Rear linkage lower link lowering speed
7.6.10 Rear linkage transport damper
7.7 Front power lift
7.7.1 Usage
7.8 Rear power take-off
7.8.1 Power take-off speed selection
7.8.2 Use
Power take-off with mechanical engagement
Hydraulically-engaged power take-off
Procedure for setting off again
7.8.3 Stationary working
7.9 Front power take-off
7.9.1 Recommendations
7.9.2 Use
Front power take-off engagement
Stopping
7.10 Rear hydraulic system
7.10.1 Association between the controls and the rear pressure connectors
Control valve block composed of 2 auxiliary hydraulic control valves
Control valve block composed of 3 auxiliary hydraulic control valves
7.10.2 Using the auxiliary hydraulic control valve linear controls
7.10.3 Motorized flow controller
7.10.4 Stationary working
7.11 Electric and electronic system
7.11.1 Manual circuit breaker
7.12 Cab and operator’s platform
7.12.1 Instrument panel display
Setting the time on the clock
7.12.2 Heating – Ventilation – Manual air conditioning
usting the ventilated air flow rate
Adjusting the ventilated air temperature
Managing the ventilation direction
Activating the air conditioning function
Activating the air recirculation function
7.12.3 Overhead light
8 Faults and remedies
8.1 Alarms
8.1.1 Primary alarms
8.1.2 Secondary alarms
8.1.3 Other alarms
8.2 Engine
8.2.1 Faults caused by a low fuel level
8.2.2 Starting assistance
Assisted starting by towing
Assisted starting using an external battery
8.3 Frame
8.3.1 Fitting a jack
8.3.2 Replacing a wheel
8.3.3 Towing the tractor
Towing with the engine stopped
Towing with the engine running
8.4 Electric and electronic system
8.4.1 Fused relays
Preheating relay and fuse
Fuse box
8.4.2 Instrument panel calibration
8.4.3 Overview of the lights
8.5 Assembly parts and machine body
8.5.1 Frontal impact on the tractor
9 Maintenance
9.1 Maintenance Information
9.1.1 Personal protective equipment
9.1.2 Immobilise the tractor and ensure it is made safe
9.1.3 Cleaning and tidying risk areas
9.1.4 Welding advice
9.1.5 Protective devices on the tractor
9.1.6 Engine
Alternator
Engine lubrication
Engine cooling
Engine belts
9.1.7 Wheels and tyres
9.1.8 Braking system
9.1.9 Pneumatic circuit
9.1.10 Direction
9.1.11 Implements driven by a power take-off
9.1.12 Air conditioning
9.1.13 Hydraulic circuit
9.1.14 Electrical system
9.1.15 Energy accumulators
9.1.16 Spare parts
9.1.17 Greasing
9.1.18 Cleaning and protection
9.1.19 Working at height
9.1.20 Handling heavy components
9.1.21 Maintenance operations under the cab or the platform
9.1.22 Lifting the front of the tractor
9.2 Maintenance interval overview
9.2.1 Handling maintenance intervals
9.2.2 After the first 10 hours
9.2.3 After first 40 hours
9.2.4 After first 100 hours
9.2.5 After the first 500 hours
9.2.6 Every 10 hours
9.2.7 Every 50 hours
9.2.8 Every 50 hours or every week
9.2.9 Every 100 hours
9.2.10 Every month
9.2.11 Every 400 hours
9.2.12 Every 500 hours
9.2.13 Every 500 hours or every 6 months
9.2.14 Every 500 hours or every year
9.2.15 Every 1000 hours
9.2.16 Every 1500 hours
9.2.17 Every 1500 hours or every year
9.2.18 Every 1500 hours or every 2 years
9.2.19 Every 3000 hours
9.2.20 Every 4500 hours or every 5 years
9.3 Lubrication plan
9.3.1 Lubrication points – 10 hrs
9.3.2 Greasing points – 50 hrs
9.3.3 Greasing points – 100 hrs
9.3.4 Greasing