File List:
00 0301 051 0.pdf
00 0302 339 3.pdf
00 0303 482 0.pdf
00 0303 520 4.pdf
00 0301 051 0.pdf:
PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms
00 0302 339 3.pdf:
JAGUAR 990 / 980 / 970 / 960 / 950 / 940 / 930JAGUAR 880 / 870 / 860 / 850 / 840 / 830JAGUAR 990 / 960 TERRA TRAC
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Maintenance notes
1.1.5 Notes on warranty
1.1.6 Spare parts and technical questions
1.2 Identification plates and identification numbers
1.2.1 Identification plate of adapter
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Importance of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Requirements made on all persons working with the product
2.2.4 Coupling the machine to the front attachment
2.2.5 Danger of injury on the universal drive shaft
2.2.6 Structural alterations
2.2.7 Technical condition
2.2.8 Unsuitable operating utilities
2.2.9 Environmental protection and disposal
2.2.10 Pressurised fluids
2.3 Safety marking
2.3.1 Structure of safety decals
2.3.2 Safety decals on the adapter
3 Operating and display elements
3.1 Cab and operator’s platform
3.1.1 Controls on B-column
4 Technical specifications
4.1 Adapter
4.1.1 Compatible machines
4.1.2 Dimensions
4.1.3 Weight
4.1.4 Lubricants
5 Operation
5.1 Adapter
5.1.1 Using the adapter
5.1.2 Removing the stripper bars
5.1.3 Adjusting the feed roller speed
5.1.4 Adjusting the cutting height potentiometer
5.1.5 Adjusting the dog clutch
5.1.6 Mounting the adapter
5.1.7 Removing the adapter
6 Maintenance
6.1 Maintenance interval overview
6.1.1 Every 10 operating hours or daily
6.1.2 Every 100 operating hours
6.1.3 Every 500 operating hours or annually
6.2 Lubrication plan
6.2.1 Grease the grease points every 10 operating hours
6.2.2 Grease points, grease every 100 working hours
6.3 Transmission, clutch and driveshaft
6.3.1 Checking the drive gearbox oil level
6.3.2 Changing the drive gearbox oil
Draining the oil
Topping up oil
6.3.3 Checking the output gearbox oil level
6.3.4 Changing the oil of output gearboxes
Draining the oil
Topping up oil
6.3.5 Checking the chain tension
00 0303 482 0.pdf:
PROFI CAM 4
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Structural changes
2.2.3 Optional equipment and spare parts
2.2.4 Operation only following proper putting into operation
2.2.5 Technical status
2.2.6 Respecting technical limit values
Respecting technical limit values
2.2.7 Hazards when driving on roads and fields
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Identification plates
3.3 Information on the product
3.3.1 CE marking
4 Operating and display elements
4.1 Camera system
4.1.1 Camera system monitor
4.1.2 CEBIS
4.2 Menu structure
4.2.1 Main menu
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electric and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Putting out of operation and disposal
10.1 General information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms
00 0303 520 4.pdf:
CORIO 880 FC / 875 FC / 870 FCCORIO 875 C / 870 CCORIO 680 FC / 675 FC / 670 FCCORIO 675 C / 670 CCORIO 575 C / 570 CCORIO 475 C / 470 C
Table of contents
1 Introduction
1.1 General information
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance notes
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Importance of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Requirements for all persons working with the machine
2.2.4 Hazard areas
2.2.5 Standing between machine and front attachment
2.2.6 Persons riding on the machine
2.2.7 Fitting a front attachment or hitching a transport trailer to the machine
2.2.8 Danger of injury from rotating shafts
2.2.9 Structural alterations
2.2.10 Optional equipment and spare parts
2.2.11 Operation only following proper putting into operation
2.2.12 Technical condition
2.2.13 Danger from damage to the machine
2.2.14 Keeping safety devices functional
2.2.15 Personal protective equipment
2.2.16 Wearing suitable clothing
2.2.17 Removing dirt and loose objects
2.2.18 Preparing the machine for road travel
2.2.19 Unsuitable operating utilities
2.2.20 Safe handling of operating and auxiliary utilities
2.2.21 Environmental protection and disposal
2.2.22 Electrocution by electrical system
2.2.23 Pressurised fluids
2.2.24 Working on machine only after shutting it down
2.2.25 Maintenance operations and repair work
2.2.26 Raised machine parts and loads
2.2.27 Hazard from welding work
2.3 Safety decals on the machine
2.3.1 Structure of safety decals
2.3.2 Position of safety decals
3 Machine description
3.1 Overview and method of operation
3.1.1 CORIO overview
3.1.2 Overview of snapping unit
3.1.3 Functions of the CORIO
3.2 Identification plates and identification numbers
3.2.1 Maize picker identification plate
3.3 Optional machine equipment
3.3.1 Main gearboxes gear pairs
3.3.2 Sprocket for increasing the intake auger speed
3.3.3 Shear bar and rubber deflector
3.3.4 Down maize auger
3.3.5 Cover raiser
3.3.6 Stubble breaker
3.3.7 High ear catching rubber
3.3.8 Safety bar
3.3.9 AUTO CONTOUR
3.3.10 AUTO PILOT
3.3.11 MONTANA kit
3.3.12 Anti-wrap guard
3.3.13 Splash guard
3.3.14 Sunflower kit
4 Operating and display elements
4.1 Front attachment
4.1.1 Controls
5 Technical specifications
5.1 CORIO
5.1.1 Dimensions
5.1.2 Weights
5.1.3 Lubricants
6 Machine preparation
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Prior to initial operation
6.2.2 Installing the
6.3 Assembling the front attachment
6.3.1 Installing and adjusting the stubble breaker*
Installing the stubble breakers
Adjusting the stubble breaker
Adjusting the working position
Setting the transport position
Adjusting the stubble breaker
Adjusting the working position
Setting the transport position
6.3.2 Fitting the skids
6.3.3 Fitting the safety bar socket*
6.3.4 Fitting the shear bar and rubber deflector*
Fitting the shear bar
Fitting the rubber deflector
6.3.5 Preparing the installation of the cover raiser*
6.4 Loading the front attachment
6.4.1 Loading and lashing down the front attachment
6.5 Mounting the front attachment
6.5.1 Installing the front attachment
6.5.2 Adapting the machine
6.5.3 Checking the stripper profile
6.5.4 Selecting the universal drive shaft
6.5.5 Converting universal drive shafts
Checking the universal drive shaft
Removing the universal drive shaft
Removing the universal drive shaft
Installing the universal drive shaft
Installing the universal drive shaft
6.5.6 Suspending the front attachment
6.5.7 Preparing the locking
6.5.8 Locking the front attachment
6.5.9 Mounting the multi-coupler
6.5.10 Installing the universal drive shaft
6.5.11 Retracting the jack stands
6.5.12 Learning the end stops of the hydraulic snapping plate adjustment
6.6 Removing the front attachment
6.6.1 Removing the front attachment
6.6.2 Removing the multi-coupler
6.6.3 Removing the universal drive shaft
6.6.4 Unlocking the front attachment
6.6.5 Extending the jack stands
6.6.6 Unhinging the front attachment
7 Operation
7.1 Driving on the road
7.1.1 Preparing road travel
7.1.2 Folding the front attachment into the transport position
7.1.3 Installing the safety bar
Fitting the safety bar on the folded-in covers
Fitting the safety bar on the folded-out covers
7.1.4 Installing the safety guards
7.2 Fieldwork
7.2.1 Preparing fieldwork
7.2.2 Removing the safety guards
7.2.3 Removing the safety bar
7.2.4 Folding out the front attachment into the working position
7.3 Feeder unit
7.3.1 Adjusting the feed rate
7.3.2 Changing the speed of the intake auger
7.4 Snapping device
7.4.1 Setting the height of the gathering points
7.4.2 Folding in the gathering point
Folding in the inner gathering points
Folding in the outer gathering points
7.4.3 Folding out the gathering points
Folding out the outer gathering points
Folding out the inner gathering points
7.4.4 Raising the cover to the maintenance position
7.4.5 Folding down the cover
7.4.6 Removing and fitting the ear catching rubber*
Removing the ear catching rubber
Fitting the ear catching rubber
7.4.7 Adjusting the snapping plates hydraulically
7.4.8 Adjusting the snapping plates mechanically
7.4.9 Installing and removing the cover raiser*
Installing the cover raiser
Removing the cover raiser
8 Faults and remedies
8.1 Front attachment
8.1.1 Overview of front attachment faults
9 Maintenance
9.1 Maintenance interval overview
9.1.1 Before the harvest
9.1.2 After the first 10 operating hours
9.1.3 After the first 50 operating hours
9.1.4 Every 10 operating hours
9.1.5 Every 50 operating hours
9.1.6 Every 100 operating hours
9.1.7 Every 250 operating hours
9.1.8 Every 500 operating hours or annually
9.1.9 After the harvest
9.2 Lubrication plan
9.2.1 Lubricating the lubrication points every 50 operating hours
9.2.2 Lubricating the lubrication points every 100 operating hours
9.2.3 Lubricating the lubrication points every 250 operating hours
9.3 Transmission, clutch and driveshaft
9.3.1 Checking the oil level in the main gearboxes
9.3.2 Changing the oil in the main gearboxes
Draining the oil
Topping up oil
9.3.3 Checking the angle drives oil level
9.3.4 Changing the oil in the angle drives
Draining the oil
Topping up oil
9.3.5 Checking the oil level in the picker gearboxes
9.3.6 Changing the oil in the picker gearboxes
Draining the oil
Topping up oil
9.3.7 Checking the intake auger drive overload clutch
9.4 Drives
9.4.1 Adjusting the drives
9.4.2 Adjusting chain (K01)
9.5 Snapping device
9.5.1 Adjusting the stripper plates
9.5.2 Removing the snapping plates
9.5.3 Fitting the snapping plates
9.5.4 Checking the snapping roller knives
9.5.5 Replacing snapping roller knives
9.5.6 Adjusting the conveyor chains
9.5.7 Changing the feed rake chains
Removing the covers
Removing the brackets
Removing the conveyor chain
Installing the conveyor chain
9.5.8 Changing the wear edges of the covers
9.5.9 Setting the height of the covers
9.6 Chopping
9.6.1 Changing the chopper knives
9.6.2 Checking the chopper knives
9.6.3 Checking the tightening torques of the chopper knives
9.6.4 Removing and fitting the knife carrier
Removing the knife carrier
Installing the knife carrier
10 Putting out of operation and disposal
10.1 General information
10.1.1 Removal from service and disposal
11 Declaration of Conformity
11.1 CORIO
11.1.1 EC declaration of conformity
11.1.2 UK Declaration of Conformity
Claas Operator Manual PDF
Claas Operator Manual PDF
Claas QUANTUM 3800 K 3500 P-K-S (613) Loader Wagons Operator Manual DE
Claas Operator Manual PDF
Claas RANGER 975-964, 970, 960 und PLUS (516) Telehandlers Operator Manual DE
Claas Operator Manual PDF
![](https://automanual.net/wp-content/uploads/2024/04/claas-corio-575-470-c-h06-combines-operator-manual-en-1.jpg)