Claas Elios 340-210 Stage V (A68) Tractors Operator Manual ES

File List:

00 1173 953 1.pdf
00 1175 210 0.pdf
00 1177 743 0.pdf

00 1173 953 1.pdf:

User manual
1. Introduction
1.1 Information regarding the instruction manual
1.1.1 Validity of the user manual
1.1.2 Information about this user manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Maintenance instructions
1.1.7 Information regarding warranty
1.1.8 Spare parts and technical questions
1.1.9 Transfer of the tractor to a third party
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable inappropriate application
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 European regulations
2.2.2 Meaning of the user manual
2.2.3 Take into account and respect the warning pictograms on the tractor and the warnings in the manual
2.2.4 Requirements that must be met by all people who work with the tractor
2.2.5 Children in danger
2.2.6 Position yourself between the tractor and the machine
2.2.7 Accompanying persons
2.2.8 Couple tractor with work device or trailer
2.2.9 Danger of injury during power take-off
2.2.10 Risk of injury in the cardan shaft area
2.2.11 Applications with front loaders
2.2.12 Avoid risks due to a front loader
2.2.13 Construction modifications
2.2.14 Optional equipment and spare parts
2.2.15 Forestry work
2.2.16 Control of the tractor in operation
2.2.17 Operation only after correct start-up
2.2.18 Technical status
2.2.19 Risks arising from damage to the tractor
2.2.20 Comply with technical limit values
2.2.21 Risks derived from machine elements that continue to operate due to inertia
2.2.22 Maintain functional protection devices
2.2.23 Personal protective equipment
2.2.24 Wear appropriate clothing
2.2.25 Remove dirt and loose objects
2.2.26 Prepare the tractor for road travel
2.2.27 Risks during road and countryside travel
2.2.28 Park the tractor safely
2.2.29 Unsuitable consumables
2.2.30 Safe handling of consumables and auxiliary materials
2.2.31 Fuel is harmful to health
2.2.32 Cooling agents are harmful to health
2.2.33 Environmental protection and waste disposal
2.2.34 Keep the cabin free of chemicals
2.2.35 Handling of pesticides and fertilizers
2.2.36 Fire prevention
2.2.37 Deadly electrical discharge through overhead lines
2.2.38 Behavior in the case of an overhead line voltage transfer and lightning strike
2.2.39 Electrical shock from electrical equipment
2.2.40 Noise can harm health
2.2.41 Vibrations can harm health
2.2.42 Liquids under pressure
2.2.43 Pressurized air
2.2.44 Toxic exhaust gases
2.2.45 Hot surfaces
2.2.46 Getting on and off safely
2.2.47 Work must be carried out only with the tractor stopped
2.2.48 Maintenance and repair work
2.2.49 Raised tractor elements and loads
2.2.50 Risks related to welding work
2.2.51 Check the battery and charge it
2.3 Safety marking on the tractor
2.3.1 Structure of graphic hazard symbols
2.3.2 Warning symbols
2.4 Safety devices
2.4.1 Wheel chock
3 Description of the tractor
3.1 Overview
3.1.1 Left front view
3.1.2 Left rear view
3.2 Identification plates and vehicle identification number
3.2.1 Tractor nameplate
Tractor identification number (VIN code)
Tractor serial number
3.2.2 Tractor power label
3.2.3 Motor nameplate
3.2.4 Transmission nameplate
3.2.5 Front axle nameplate
3.2.6 Cab or platform nameplate
3.3 Information on the tractor
3.3.1 Lifting points
3.3.2 Transmission oil level indicator
3.3.3 Brake fluid
3.3.4 Engine cover
3.3.5 Disassembly of the side covers
3.3.6 Tractor lubrication
3.3.7 Rear lift
3.3.8 Pressure taps of the rear hydraulic distributors
3.3.9 Emergency exit
3.3.10 Cab category
4 Control and display instruments
4.1 Cabin
4.1.1 Driving position
Right side controls (tractor with electronic lift)
Right side controls (tractor with mechanical lift)
Left side controls
4.1.2 Dashboard
Tractor with mechanical inverter
Tractor with low torque inverter
4.1.3 Controls on the right pillar
4.1.4 Cabin top controls
Heating, ventilation and air conditioning controls
rear wiper
Roof light
Car radio (pre-equipment)
4.1.5 Access and glass
Right and left doors
Openable tailgate
Openable windshield
Sunshade curtain
Sunshade curtain for the glass roof
4.2 Driver’s platform
4.2.1 Driving position
Right side controls
Left side controls
4.2.2 Work light controls
4.3 Control and display instruments
4.3.1 Instrument panel
4.3.2 Instrument panel digital display
4.3.3 Electronic elevator controls
4.3.4 Rear mechanical linkage controls
4.3.5 External controls
Mechanical rear hydraulic lift
4.4 Hydraulic installation
4.4.1 Hydraulic controls
Front lift
Conversion of double-acting/single-acting auxiliary hydraulic distributors
4.5 Electrical and electronic system
4.5.1 Key contactor
4.5.2 Control lever for signal lights and acoustic warning
4.5.3 External controls
Electronic rear lift
4.5.4 Power outlet from an electrical box
4.6 Assembled parts and machine casing
4.6.1 Viewer
4.6.2 Toolbox
5 Technical data
5.1 ELIOS
5.1.1 Dimensions
Cabin version
Platform version
5.1.2 Tractor weight
Cabin version
Platform version
5.1.3 Engine
5.1.4 Gearbox
mechanical transmission
Electrohydraulic transmission
5.1.5 Tractor travel speeds
5.1.6 Without duplicator and 12/12 gearbox – 30 km/h version
5.1.7 Mechanical or electrohydraulic duplicator and 24/24 gearbox. 40 km/h version
5.1.8 Electrohydraulic inverter
5.1.9 Engine front axle
Synchronism ratio
30 km/h version
40 km/h version
5.1.10 Rear axle
5.1.11 Front track table
Standard front axle
Narrow front bridge
5.1.12 Rear track table
5.1.13 Tire combinations
ELIOS 210 (total loaded weight 5100 kg)
ELIOS 210 (total loaded weight 3500 kg)
5.1.14 Tire characteristics
5.1.15 Brakes
5.1.16 Address
5.1.17 Rear linkage
5.1.18 Front linkage
5.1.19 Rear hitches
hitch ladder
Ladder hitch with pins
Ladder hitch with guides
Pull hook
5.1.20 Rear PTO
5.1.21 Front power take-off
5.1.22 Hydraulic circuits
Open central circuit 60 l/min
Open central circuit 85 l/min
5.1.23 Hydraulic distributor combinations
5.1.24 Electrical circuit
5.1.25 Noise level
Sound level in the driver’s ears (according to Annex XIII of delegated regulation 1322/2014)
Sound level in the ears of a passer-by (according to Annex III of delegated regulation 2015/96)
5.1.26 Seat vibration level
5.1.27 Level of protection ensured by the cabin
5.1.28 Level of protection ensured by the platform
5.1.29 Ballast
5.1.30 Maximum allowable towable masses
5.1.31 Load capacities
5.2 Inputs
5.2.1 Lubricants and hydraulic oils
5.2.2 Engine coolant
5.2.3 Brake fluid
5.2.4 Air conditioning circuit
6 Prepare the tractor
6.1 Securing the tractor
6.1.1 Stop the tractor and secure it
6.1.2 Put the tractor in safety position
6.2 Perform before commissioning
6.2.1 Preparation for the first start-up
6.2.2 Preparation for commissioning
6.2.3 Hitching and connecting the implement
6.3 Engine
6.3.1 Fuel
Quality requirement
Particularities of biofuels
Fuel handling
6.3.2 Filling the fuel tank
6.4 Framework
6.4.1 Track adjustment
Track adjustment method
6.4.2 Adjustment of the front axle rotation stops
Verification
Adjustment
6.4.3 General characteristics of the tires
6.4.4 Inflation pressure
Effect on soil compaction
Effect on consumption
6.4.5 Features
Load index
speed index
6.5 Brake
6.5.1 Brake pedal engagement
6.5.2 Hydraulic trailer brake
6.6 Address
6.6.1 Steering column
6.7 Rear linkage
6.7.1 Lifting supports
6.7.2 Upper connecting rod
6.7.3 Stabilizers
6.7.4 Vertical tie rod of the hydraulic system
6.7.5 Automatic hooks
6.7.6 External rear linkage controls
Mechanical rear hydraulic lift
Electrohydraulic rear lift
6.7.7 Hitching and unhitching an implement
Recommendations for hitching an implement
hitch an implement
Unhook an implement
6.8 Front linkage
6.8.1 Placing the plugs in the pressure taps
6.8.2 Conversion of the front linkage into single-acting/double-acting
6.8.3 Front linkage lock
6.8.4 Upper connecting rod
6.8.5 Front linkage lower connecting rods
6.8.6 Automatic hooks
6.8.7 Hitching and unhitching an implement
Recommendations for hitching an implement
hitch an implement
Unhook an implement
6.9 Front loader
6.9.1 Mounting the front loader adapter
6.10 Rear PTO
6.10.1 Hitching and unhitching an implement
Connect and disconnect the rear PTO cardan
Hooking an implement to the rear power take-off
Unhooking an implement from the rear power take-off
6.11 Towing device
6.11.1 Recommendations
6.11.2 Calculation of maximum towable load (not including CUNA forks)
6.11.3 Hitch forks
6.11.4 Oscillating bar
Tightening of the jaw
Safety device
6.11.5 Pull hook
6.12 Rear hydraulic system
6.12.1 Rear pressure taps
Connection or disconnection of pressure taps
Free return to deposit
6.12.2 Single acting/double acting adjustment
6.13 Front hydraulic system
6.13.1 Lateral pressure taps
Connection/Disconnection of pressure taps
6.14 Electrical and electronic system
6.14.1 Electrical sockets
Lighting socket on trailer or tool
Power outlet from an electrical box
6.14.2 Adjusting the low beam headlights on the engine hood
6.15 Cabin and driving position
6.15.1 Mirror adjustment
Cabin version
Telescopic mirrors (depending on option)
Interior mirror
Platform version
6.15.2 Folding arch
6.15.3 Driver’s seat adjustment
6.15.4 Cable routing
6.15.5 Compartments
6.15.6 Category 2 filter
6.16 Assembly and body parts
6.16.1 Ballast
6.16.2 Balancing the tractor with mounted tools
Summary table
6.16.3 Assembly and disassembly of the front masses
6.16.4 Opening and closing the engine hoods
Monobloc cover
Opening the engine cover
Engine cover closure
Side covers
Removing the side covers
Reinstall the side covers
6.17 Transport of the tractor
6.17.1 Transport
7 Management
7.1 Driving and transportation
7.1.1 Preparation of the road itinerary
7.1.2 Preparation of the field itinerary
7.1.3 Driving with implements
Difficult pulling jobs
7.2 Engine
7.2.1 Break-in
7.2.2 Start the engine
Preliminary operations
Start up
7.2.3 Accelerator pedal
7.2.4 Hand throttle
7.2.5 Engine speed memories
Activation of an engine speed memory
Manual adjustment of engine speed memories (first method)
Manual adjustment of engine speed memories (second method)
7.2.6 Particle filter
Particulate filter filling percentage
Scorecard
Operating logic
Automatic particulate filter regeneration
Regeneration of the particulate filter when stopped
Maintenance regeneration
Particulate filter replacement
7.2.7 Turn off the engine
7.3 Transmission, clutch and cardan shaft
7.3.1 Neutral position of the reverse gear
Tractors with mechanical inverter
Tractors with low torque inverter (electrohydraulic)
7.3.2 Selection of the direction of travel of the tractor
recommendations
Tractors with mechanical inverter
Tractors with electrohydraulic inverter
7.3.3 Clutch
Advance pedal
contactor
7.3.4 Speed ​​selection
7.3.5 Range selection
7.3.6 Range duplicator
Mechanical range duplicator
Electrohydraulic range duplicator
7.3.7 Differential lock
7.4 Chassis
7.4.1 Placing the tractor on lifting supports
7.4.2 Front axle activation
Front axle automatic mode
Front axle permanent mode
7.5 Brake
7.5.1 Service brakes
7.5.2 Parking brake
7.6 Electronic rear hydraulic lift
7.6.1 Safety indicator
7.6.2 Transport security
7.6.3 Lift start-up
7.6.4 Mode selection
7.6.5 Position control
7.6.6 Effort control
7.6.7 Upper stop
7.6.8 Lowering speed of the lower linkages of the rear hydraulic linkage
7.6.9 Quick ground entry function
7.6.10 External controls of the electrohydraulic rear lift
7.7 Mechanical rear hydraulic lift
7.7.1 Position control
7.7.2 Effort control
7.7.3 Mixed con
7.7.4 Floating hitch
7.7.5 Sensitivity adjustment
7.7.6 External controls for the mechanical rear linkage
7.8 Front linkage
7.8.1 Use
Mechanical control distributor
Electrohydraulic distributor
7.9 Rear PTO
7.9.1 PTO speed selection
Selection of power take-off regime proportional to the advance
7.9.2 Use
Assisted mechanical activation power take-off
PTO with electrohydraulic start
7.9.3 Work in fixed position
7.10 Front power take-off
7.10.1 Use of the front power take-off
Activation of the front power take-off
Disengage the front power take-off
7.10.2 Work in fixed position
7.11 Rear hydraulic system
7.11.1 Rear controls and pressure taps
Hydraulic distributors with mechanical control
Electrohydraulic distributors
7.11.2 Auxiliary hydraulic distributors with mechanical control
7.11.3 Auxiliary electrohydraulic distributors
Controls
Start up
Online controls
Pressure position
floating position
Hydraulic timer
Cross control
floating position
Additional functions
7.11.4 Hydraulic timer
7.11.5 Adjustment of hydraulic flows
Flow divider
Flow regulator
Hydraulic circuits with two hydraulic pumps
Hydraulic circuits with three hydraulic pumps
Electrohydraulic distributors
7.11.6 Work in fixed position
7.12 Front hydraulic system
7.12.1 Controls and lateral pressure taps
Auxiliary hydraulic distributors with mechanical control
Electrohydraulic Auxiliary Hydraulic Distributors
7.13 Electrical and electronic system
7.13.1 Manual circuit breaker
7.14 Cabin and driving position
7.14.1 Instrument panel display
Screen information menu
Available data:
Usage menu
Particulate filter (DPF)
Inhibition of unburned fuel volume reduction strategy
Language
Measurement units
Transmission errors
Engine errors
Tractor speed calibration
Exit the user menu
7.14.2 Manual air conditioning control
Windshield defrosting
7.14.3 Category 2 filtration system
8 Incident and solution
8.1 Alarms
8.1.1 Operating anomalies
Viewing error codes
8.1.2 Primary alarms
8.1.3 Secondary alarms
8.1.4 Other alarms
8.1.5 Steps to resolve various anomalies
Tractor error codes
Engine error codes
8.2 Engine
8.2.1 Failure due to lack of fuel
8.3 Framework
8.3.1 Jack placement
8.3.2 Changing a wheel
8.3.3 Tractor towing
Trailer with engine running
Trailer with engine off
towing forks
8.3.4 Unclogging the tractor
Tractor unclogging
Unclogging a tractor by towing
8.4 Electrical and electronic system
8.4.1 Fuses and relays
Main fuse box
Tractor with mechanical inverter
Tractor with hydraulic reverser
Control panel fuses
Right pillar fuse box
Fuses and relays on the front of the engine
Electrohydraulic distributor fuse box
8.4.2 Lights overview
9 Maintenance
9.1 Maintenance instructions
9.1.1 Personal protective equipment
9.1.2 Use according to assignment
9.1.3 Shutting down the engine and securing the tractor
9.1.4 Clean and organize risk areas
9.1.5 Welding instructions
9.1.6 Protection devices on the tractor
9.1.7 Engine
Alternator
Engine lubrication
engine cooling
engine belts
9.1.8 Wheels and tires
9.1.9 Braking system
9.1.10 Address
9.1.11 Power take-off driven tools
9.1.12 Air conditioning
9.1.13 Hydraulic circuit
9.1.14 Electrical system
9.1.15 Energy accumulators
9.1.16 Spare parts
9.1.17 Cleaning and protection
9.1.18 Work at height
9.1.19 Handling of heavy parts
9.1.20 Maintenance operations under the cabin or platform
9.1.21 Lifting the front of the tractor
9.2 Summary of maintenance intervals
9.2.1 First 100 hours of service
9.2.2 First 600 hours of service
9.2.3 Every 10 hours of service
9.2.4 Every 20 hours of service
9.2.5 Every 50 hours of service
9.2.6 Every 100 hours of service
9.2.7 Every 600 hours of service
9.2.8 Every 1200 hours of service
9.2.9 Every 2400 hours of service
9.2.10 Every two years
9.3 Greasing scheme
9.3.1 Greasing points – 20 h
9.3.2 Grease points – 50 h
9.3.3 Grease points, 100 h
9.3.4 Grease points – 600 h
9.4 Engine maintenance operations
9.4.1 Eliminate the water present in the fuel prefilter
9.4.2 Changing fuel filters
9.4.3 Bleed the air from the fuel circuit
9.4.4 Check the engine oil level
9.4.5 Change engine oil
Reset the instrument panel
9.4.6 Change the engine oil filter
9.4.7 Replacing the oil vapor recycling filter
9.4.8 Check the coolant level
9.4.9 Check the tightness of the cooling circuit
9.4.10 Clean the refrigerators
9.4.11 Check the alternator and engine water pump belt
9.4.12 Replace the alternator belt and engine water pump
Removal and installation of the alternator belt
Assembly diagram
Disassembly
Mounting
9.4.13 Clean the engine air filter
9.4.14 Change the engine air filter
9.4.15 Replacing the engine air filter safety cartridge
9.4.16 Check the tightness of the air intake
9.5 Gear maintenance operations
9.5.1 Check the clutch pedal play
9.5.2 Forward clutch clearance adjustment (depending on equipment)
9.6 Chassis maintenance work
9.6.1 Checking the front axle differential case oil level
9.6.2 Change the oil in the front axle differential casing
9.6.3 Check the oil level of the front axle final reductions
9.6.4 Change the oil in the front axle final reductions
9.6.5 Change the front axle breather
9.6.6 Check the tightness of the wheel discs on the hubs
9.6.7 Checking the tightness of the wheel discs on the rims
9.6.8 Check the condition of the wheels, tires and tire inflation pressure
9.7 Brake maintenance operations
9.7.1 Checking the service brake fluid level
9.8 Hitch device maintenance operations
9.8.1 Checking the fork clearances
9.9 Rear power take-off maintenance operations
9.9.1 Check the clutch play with respect to the rear power take-off
9.10 Front power take-off maintenance operations
9.10.1 Check the oil level of the front power take-off box
9.10.2 Replacing the front power take-off housing filter
9.10.3 Replacing the oil in the front power take-off box
9.11 Hydraulic installation maintenance work
9.11.1 Checking the oil level of the hydraulic circuit and transmission
9.11.2 Replacing the hydraulic circuit and transmission oil
9.11.3 Replacing the filter cartridges of the hydraulic circuit and transmission
9.11.4 Replacing the hydraulic shower head
9.11.5 Check the hydraulic circuit.
9.12 Electrical/electronic installation maintenance work
9.12.1 Clean and grease the battery terminals
9.12.2 Checking the operation and condition of lighting and signaling devices
9.13 Cabin/driving position maintenance operations
9.13.1 Check the windshield washer fluid level
9.13.2 Clean the cabin air filter
9.13.3 Clean the cabin air filter that treats recirculated air
9.13.4 Replacing the cabin air filter
9.13.5 Replace the cabin air filter that treats recirculation air
9.13.6 Start the air conditioning
9.13.7 Air conditioning dehydrator control
9.14 Bodywork maintenance operations
9.14.1 Check the tightening of the front mass fixing screws
9.14.2 Cleaning the grill grates
9.15 Parking
9.15.1 Parking instructions
Long term parking
New tractor commissioning
10 Decommissioning and waste disposal
10.1 Information about the machine
10.1.1 Disposal and waste disposal
11 Technical dictionary and abbreviations
11.1 Technical dictionary and abbreviations
11.1.1 Technical terms
11.1.2 Abbreviations

00 1175 210 0.pdf:

ELIOS 240-230-220Stage V
1. Introduction
1.1 Information regarding the instruction manual
1.1.1 Validity of the user manual
1.1.2 Information about this user manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Maintenance instructions
1.1.7 Information regarding warranty
1.1.8 Spare parts and technical questions
1.1.9 Transfer of the tractor to a third party
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable inappropriate application
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 European regulations
2.2.2 Meaning of the user manual
2.2.3 Take into account and respect the warning pictograms on the tractor and the warnings in the manual
2.2.4 Requirements that must be met by all people who work with the tractor
2.2.5 Children in danger
2.2.6 Position yourself between the tractor and the machine
2.2.7 Accompanying persons
2.2.8 Couple tractor with work device or trailer
2.2.9 Danger of injury during power take-off
2.2.10 Risk of injury in the cardan shaft area
2.2.11 Applications with front loaders
2.2.12 Avoid risks due to a front loader
2.2.13 Construction modifications
2.2.14 Optional equipment and spare parts
2.2.15 Forestry work
2.2.16 Control of the tractor in operation
2.2.17 Operation only after correct start-up
2.2.18 Technical status
2.2.19 Risks arising from damage to the tractor
2.2.20 Respect technical limit values
2.2.21 Risks derived from machine elements that continue to operate due to inertia
2.2.22 Maintain functional protection devices
2.2.23 Personal protective equipment
2.2.24 Wear appropriate clothing
2.2.25 Remove dirt and loose objects
2.2.26 Prepare the tractor for road travel
2.2.27 Risks during road and countryside travel
2.2.28 Store the tractor safely
2.2.29 Unsuitable consumables
2.2.30 Safe handling of consumables and auxiliary materials
2.2.31 Fuel is harmful to health
2.2.32 Cooling agents are harmful to health
2.2.33 Environmental protection and waste disposal
2.2.34 Keep the cabin free of chemicals
2.2.35 Handling of pesticides and fertilizers
2.2.36 Fire prevention
2.2.37 Deadly electrical discharge through overhead lines
2.2.38 Behavior in the case of an overhead line voltage transfer and lightning strike
2.2.39 Electrical shock from electrical equipment
2.2.40 Noise can harm health
2.2.41 Vibrations can harm health
2.2.42 Liquids under pressure
2.2.43 Pressurized air
2.2.44 Toxic exhaust gases
2.2.45 Hot surfaces
2.2.46 Getting on and off safely
2.2.47 Work must be carried out only with the tractor stopped
2.2.48 Maintenance and repair work
2.2.49 Raised tractor elements and loads
2.2.50 Risks related to welding work
2.2.51 Check the battery and charge it
2.3 Safety marking on the tractor
2.3.1 Structure of graphic hazard symbols
2.3.2 Warning symbols
2.4 Safety devices
2.4.1 Wheel chock
3 Description of the tractor
3.1 Overview
3.1.1 Left front view of the tractor
3.1.2 Left rear view of the tractor
3.2 Identification plates and vehicle identification number
3.2.1 Tractor nameplate
Tractor identification number (VIN code)
Decoding of Types/variants/versions
Tractor serial number
3.2.2 Tractor power label
3.2.3 Motor nameplate
3.2.4 Transmission nameplate
3.2.5 Front axle nameplate
3.2.6 Cab nameplate
3.3 Information on the tractor
3.3.1 Lifting points
3.3.2 Transmission oil level indicator
3.3.3 Brake fluid
3.3.4 Engine cover
3.3.5 Disassembly of the side covers
3.3.6 Tractor lubrication
3.3.7 Rear lift
3.3.8 Pressure taps of the rear hydraulic distributors
3.3.9 Emergency exit
3.3.10 Cab category
4 Control and display instruments
4.1 Cabin
4.1.1 Driving position
Right side controls
Left side controls
4.1.2 Dashboard
Tractor with mechanical inverter
Tractor with low torque inverter
4.1.3 Controls on the right pillar
4.1.4 Cabin top controls
Heating, ventilation and air conditioning controls
rear wiper
Roof light
Car radio (pre-equipment)
4.1.5 Access and glass
Right and left doors
Openable tailgate
Openable windshield
Sunshade curtain
Sunshade curtain for the glass roof
4.2 Control and display instruments
4.2.1 Instrument panel module
4.2.2 Instrument panel digital display
Engine oil warning light
Transmission oil warning light
Indication of the calculated speed of the tractor
Urea solution level indication in the tank
Indicator light warning of the presence of water in the fuel
Speed ​​range duplicator status indicatoght
Indicator light indicating the status of the tractor’s direction of travel iter
Second trailer turn signal light indicator
Indicator light of the direction indicators of the first trailer
Exhaust gas decontamination strategy warning light
Warning light regarding particulate filter regeneration
Rear PTO rotation speed indication
4.2.3 Rear mechanical linkage controls
4.2.4 External controls
Mechanical rear hydraulic lift
4.3 Hydraulic installation
4.3.1 Hydraulic controls
Front lift
Conversion of double-acting/single-acting auxiliary hydraulic distributors
4.4 Electrical and electronic system
4.4.1 Key contactor
4.4.2 Control lever for signal lights and acoustic warning
4.4.3 Power outlet from an electrical box
4.5 Assembled parts and machine casing
4.5.1 Viewer
4.5.2 Toolbox
5 Technical data
5.1 ELIOS
5.1.1 Tractor dimensions
5.1.2 Tractor weight
5.1.3 Engine
5.1.4 Gearbox
Transmission with mechanical shuttle
Electrohydraulic transmission
5.1.5 Tractor travel speeds
5.1.6 Mechanical duplicator and inverter and 24/24 gearbox – 40 km/h version
5.1.7 Hydraulic duplicator and reverser and 24/12 gearbox – 40 km/h version
5.1.8 Engine front axle
Synchronism ratio
5.1.9 Rear axle
5.1.10 Front track table
Standard front axle (distance between front axle plates: 1640 mm)
Narrow front axle (distance between front axle chainrings: 1460 mm)
5.1.11 Rear track table
5.1.12 Tire combinations
5.1.13 Tire characteristics
5.1.14 Brakes
5.1.15 Address
5.1.16 Rear linkage
5.1.17 Front linkage
5.1.18 Rear hitches
hitch ladder
Ladder hitch with pins
Ladder hitch with guides
Pull hook
5.1.19 Rear PTO
5.1.20 Front power take-off
5.1.21 Hydraulic circuits
Open central circuit 60 l/min
Open central circuit 85 l/min
5.1.22 Hydraulic distributor combinations
Hydraulic distributors
Electrohydraulic distributors
5.1.23 Electrical circuit
5.1.24 Noise level
Sound level in the driver’s ears (according to Annex XIII of delegated regulation 1322/2014)
Sound level in the ears of a passer-by (according to Annex III of delegated regulation 2015/96)
5.1.25 Seat vibration level
5.1.26 Level of protection ensured by the cabin
5.1.27 Tractor ballasting
5.1.28 Maximum allowable towable masses
5.1.29 Load capacities
5.2 Inputs
5.2.1 Lubricants and hydraulic oils
5.2.2 Engine coolant
5.2.3 Brake fluid
5.2.4 Air conditioning circuit
6 Prepare the tractor
6.1 Securing the tractor
6.1.1 Stop the tractor and secure it
6.1.2 Put the tractor in safety position
6.2 Perform before commissioning
6.2.1 Preparation for the first start-up
6.2.2 Preparation for commissioning
6.2.3 Hitching and connecting the implement
6.3 Engine
6.3.1 Fuel
Quality requirement
Particularities of biofuels
Fuel handling
6.3.2 Urea solution
Use of urea solution
Purity and norm of urea solution
Storage of urea solution in tanks or containers
6.3.3 Filling the tractor tank
Fill the fuel tank
Fill the urea solution tank
6.4 Framework
6.4.1 Track adjustment
Track adjustment method
6.4.2 Adjustment of the front axle rotation stops
Verification
Adjustment
6.4.3 General characteristics of the tires
6.4.4 Inflation pressure
Effect on soil compaction
Effect on consumption
6.4.5 Features
Load index
speed index
6.5 Brake
6.5.1 Brake pedal engagement
6.5.2 Hydraulic Trailer Brakes
6.6 Address
6.6.1 Steering column
6.7 Rear linkage
6.7.1 Lifting supports
6.7.2 Upper connecting rod
6.7.3 Stabilizers
6.7.4 Vertical tie rod of the hydraulic system
6.7.5 Automatic hooks
6.7.6 External rear linkage controls
6.7.7 Hitching and unhitching an implement
Recommendations for hitching an implement
hitch an implement
Unhook an implement
6.8 Front linkage
6.8.1 Placing the plugs in the pressure taps
6.8.2 Conversion of the front linkage into single-acting/double-acting
6.8.3 Front linkage lock
6.8.4 Upper connecting rod
6.8.5 Front linkage lower connecting rods
6.8.6 Automatic hooks
6.8.7 Hitching and unhitching an implement
Recommendations for hitching an implement
hitch an implement
Unhook an implement
6.9 Front loader
6.9.1 Mounting the front loader adapter
6.10 Rear PTO
6.10.1 Hitching and unhitching an implement
Connect and disconnect the rear PTO cardan
Hooking an implement to the rear power take-off
Unhooking an implement from the rear power take-off
6.11 Towing device
6.11.1 Recommendations
6.11.2 Calculation of maximum towable load (not including CUNA forks)
6.11.3 Hitch forks
6.11.4 Oscillating bar
Tightening of the jaw
Safety device
6.11.5 Pull hook
6.12 Rear hydraulic system
6.12.1 Rear pressure taps
Connection or disconnection of pressure taps
Free return to deposit
6.12.2 Single acting/double acting adjustment
6.13 Electrical and electronic system
6.13.1 Electrical sockets
Lighting socket on trailer or tool
Power outlet from an electrical box
6.13.2 Adjustment of the low beam headlights on the engine hood
6.14 Cabin
6.14.1 Mirror adjustment
Cabin version
Telescopic mirrors (depending on option)
Interior mirror
6.14.2 Driver’s seat adjustment
6.14.3 Cable routing
6.14.4 Compartments
6.14.5 Category 2 filter
6.15 Assembly and body parts
6.15.1 Ballast
6.15.2 Balancing the tractor with mounted tools
Summary table
6.15.3 Assemble the front masses
6.15.4 Opening and closing the engine hoods
Monobloc engine hood opening
Monobloc engine hood closure
Remove the left side engine hood
Remove the right side