Claas GPS PILOT S3 TERMINAL (B82) Digital solutions Operator Manual DE

File List:

– 00 0018 530 0.pdf
– 00 0018 583 4.pdf
– 00 0018 646 2.pdf
– 00 0018 651 1.pdf
– 00 0293 137 3.pdf
– 00 0301 050 0.pdf
– 00 0303 481 0.pdf
– 00 1400 091 0.pdf
– 00 1400 463 5.pdf
– 00 1400 634 3.pdf
– 00 1400 800 3.pdf
– 00 1400 859 2.pdf
– 00 1402 752 1.pdf
– 00 2348 299 0.pdf
– 00 2666 665 5.pdf

00 0018 530 0.pdf

Table of Content:
1 BASELINE HD base station
2 Table of Contents
3 1 About these operating instructions
3.1 1.1 Notes on the instructions
4 2 Security
4.1 2.1 Intended use
4.2 2.2 Safety instructions
4.3 2.3 Safety instructions in these instructions
5 3 Product description
5.1 3.1 Overview and functionality
5.2 3.2 Type plates and identification numbers
6 4 Control and display elements
6.1 4.1 BASELINE HD
7 5 Technical data
7.1 5.1 BASELINE HD
8 6 Prepare product
8.1 6.1 BASELINE HD base station
8.2 6.2 Initial commissioning correction signal
9 7 Operation
9.1 7.1 BASELINE HD base station
9.2 7.2 Settings
10 8 Malfunction and remedy
10.1 8.1 Malfunction and remedy
11 9 Decommissioning and disposal
11.1 9.1 Decommissioning and disposal
12 10 technical terms and abbreviations
12.1 10.1 Terms and explanations

00 0018 583 4.pdf

Table of Content:
1 EASY on board App
2 Table of Contents
3 1 Introduction
3.1 1.1 Notes on the instructions
3.2 1.2 Intended use
3.3 1.3 Software update
3.4 1.4 Malfunction and remedy
3.5 1.5 Technical terms and abbreviations
4 2 Security
4.1 2.1 Recognize warnings
4.2 2.2 Safety instructions
5 3 EASY on board App
5.1 3.1 Control and display elements
5.2 3.2 Operation
6 4 Documentation
6.1 4.1 Product description
6.2 4.2 Control and display elements
6.3 4.3 Create order
6.4 4.4 Documentation
7 5 ISO Terminal
7.1 5.1 Product description
7.2 5.2 Control and display elements
7.3 5.3 Programmable buttons
8 6 Settings
8.1 6.1 Control and display elements
8.2 6.2 Settings
9.1 7.1 Settings

00 0018 651 1.pdf

Table of Content:
1 Quick guide GPS COPILOT
1.1 General
1.2 AB mode
1.3 Contour Mode
1.4 Change in working width
1.5 Change of signal type
1.6 Area measurement
1.7 Automatic A-B line shift

00 0293 137 3.pdf

Table of Content:
1 1 Introduction
1.1 1.1 General information
1.2 1.2 Attachments / machine housing
2 2 Security
2.1 2.1 General information
2.2 2.2 Safety instructions
3 3 Machine overview
3.1 3.1 Antennas Overview
3.2 3.2 Signal Overview
3.3 3.3 Monitor GPS PILOT
3.4 3.4 Base station for BASELINE HD
4 4 Before initial commissioning
4.1 4.1 General information
4.2 4.2 Initial commissioning of base station
4.3 4.3 Initial commissioning of the GPS antenna (OmniSTAR HP, RTK)
4.4 4.4 Initial commissioning of the GPS PILOT monitor
4.5 4.5 Initial commissioning LEXION
4.6 4.6 COUGAR
4.7 4.7 XERION
4.8 4.8 Tractor
5 5 Before each start-up
5.1 5.1 General information
6 6 Operation GPS PILOT
6.1 6.1 General information
6.2 6.2 Monitor controls and displays
6.3 6.3 Menu structure
6.4 6.4 Main menu
6.5 6.5 Submenu Troubleshooting
7 7 Work input
7.1 7.1 General information
7.2 7.2 Base station
7.3 7.3 LEXION
7.4 7.4 COUGAR
7.5 7.5 XERION
7.6 7.6 Tractor
7.7 7.7 GPS PILOT
8 8 Maintenance
8.1 8.1 General information
8.2 8.2 Electrics / Electronics

00 0301 050 0.pdf

Table of Content:
1 PROFI CAM 3
2 Table of Contents
3 1 Introduction
3.1 1.1 Notes on the instructions
3.2 1.2 Intended use
4 2 Security
4.1 2.1 Recognize warnings
4.2 2.2 Safety instructions
5 3 Product description
5.1 3.1 Overview and functionality
5.2 3.2 Type plates and identification number
5.3 3.3 Information on the product
6 4 Control and display elements
6.1 4.1 Camera system
6.2 4.2 Menu structure
7 5 Technical data
7.1 5.1 PROFI CAM
8 6 Prepare product
8.1 6.1 Switch off and secure the machine
8.2 6.2 Carry out before commissioning
9 7 Operation
9.1 7.1 Monitor
10 8 Malfunction and remedy
10.1 8.1 Electrics and electronics
11 9 Maintenance
11.1 9.1 Maintenance intervals
11.2 9.2 Camera system
12 10 Decommissioning and disposal
12.1 10.1 General information
13 11 technical terms and abbreviations
13.1 11.1 Abbreviations

00 0303 481 0.pdf

Table of Content:
1 PROFI CAM 4
2 Table of Contents
3 1 Introduction
3.1 1.1 Notes on the instructions
3.2 1.2 Intended use
4 2 Security
4.1 2.1 Recognize warnings
4.2 2.2 Safety instructions
5 3 Product description
5.1 3.1 Overview and functionality
5.2 3.2 Type plates and identification number
5.3 3.3 Information on the product
6 4 Control and display elements
6.1 4.1 Camera system
6.2 4.2 Menu structure
7 5 Technical data
7.1 5.1 PROFI CAM
8 6 Prepare product
8.1 6.1 Switch off and secure the machine
8.2 6.2 Carry out before commissioning
9 7 Operation
9.1 7.1 Monitor
10 8 Malfunction and remedy
10.1 8.1 Electrics and electronics
11 9 Maintenance
11.1 9.1 Maintenance intervals
11.2 9.2 Camera system
12 10 Decommissioning and disposal
12.1 10.1 General information
13 11 technical terms and abbreviations
13.1 11.1 Abbreviations

00 1400 091 0.pdf

Table of Content:
1 CULTI CAM
2 Table of Contents
3 1 About these operating instructions
3.1 1.1 Notes on the instructions
4 2 Security
4.1 2.1 Safety instructions
4.2 2.2 Safety instructions in these instructions
4.3 2.3 Safety devices
5 3 Product description
5.1 3.1 Overview and functionality
5.2 3.2 Optional equipment
5.3 3.3 Type plates and identification numbers
6 4 Control and display elements
6.1 4.1 COMMUNICATOR II
6.2 4.2 CULTI CAM
7 5 Technical data
7.1 5.1 COMMUNICATOR II
7.2 5.2 CULTI CAM
8 6 Prepare product
8.1 6.1 General information
8.2 6.2 Carry out before commissioning
8.3 6.3 Cultivation
8.4 6.4 CULTI CAM
9 7 Operation
9.1 7.1 Driving on the road
9.2 7.2 Switch COMMUNICATOR II on/off
9.3 7.3 COMMUNICATOR II Programmable buttons
9.4 7.4 COMMUNICATOR II ISOBUS settings
9.5 7.5 COMMUNICATOR II Terminal Settings
9.6 7.6 Work input
10 8 Malfunction and remedy
10.1 8.1 Overview of faults
11 9 Maintenance
11.1 9.1 General information
11.2 9.2 Maintenance instructions
12 10 Service
12.1 10.1 General information
13 11 Decommissioning and disposal
13.1 11.1 General information
14 12 technical terms and abbreviations
14.1 12.1 Terms and explanations

00 1400 463 5.pdf

Table of Content:
1 GPS PILOTGPS PILOT FLEX
2.1 1.1 Homologation
3.1 2.1 Homologation
4.1 3.1 Homologation
9.1 8.1 Homologacin
10.1 9.1 Tbikinnitus
11.1 10.1 Homologaatio
12.1 11.1 Homologacija
13.1 12.1 Homologiz?ers
6 4 Control and display elements
6.1 4.1 Overview S7 Terminal
6.2 4.2 Menu structure GPS COPILOT
7 5 Technical data
7.1 5.1 GPS COPILOT
7.2 5.2 S7 Terminal
8 6 Prepare product
8.1 6.1 Switch off and secure the machine
8.2 6.2 Carry out before commissioning
8.3 6.3 Initial commissioning machine
8.4 6.4 Initial commissioning of the implement
8.5 6.5 Initial commissioning correction signal
8.6 6.6 Set subscriptions
9 7 Operation
9.1 7.1 Checklists
9.2 7.2 GPS COPILOT
9.3 7.3 GPS Settings
9.4 7.4 System Settings
9.5 7.5 Vehicle settings
9.6 7.6 Device settings
9.7 7.7 Order management
9.8 7.8 Field trip with GPS COPILOT
9.9 7.9 Boundaries and markers
9.10 7.10 Straight lines
9.11 7.11 Circular line guidance
9.12 7.12 Contour line guidance
9.13 7.13 Section display
10 8 Malfunction and remedy
10.1 8.1 Errors and measures
10.2 8.2 S7 Terminal
10.3 8.3 Diagnosis
11 9 Maintenance
11.1 9.1 Overview of maintenance intervals
12 10 Decommissioning and disposal
12.1 10.1 General information
13 11 EC declaration of conformity
13.1 11.1 GPS COPILOT
14 12 technical terms and abbreviations
14.1 12.1 GPS COPILOT

00 1400 800 3.pdf

Table of Content:
1 GPS PILOT
2 Table of Contents
3 1 About these operating instructions
3.1 1.1 General information
4 2 Security
4.1 2.1 General information
4.2 2.2 Safety instructions in these instructions
5 3 Machine description
5.1 3.1 Overview of correction signals
5.2 3.2 Overview of antennas
5.3 3.3 Terminal S3
5.4 3.4 Navigation computer (ECU)
5.5 3.5 Valve unit
5.6 3.6 Steering wheel
5.7 3.7 Safety devices
5.8 3.8 Travel switch
5.9 3.9 BASELINE HD base station
5.10 3.10 RTK base station
6 4 Control and display elements
6.1 4.1 General information
6.2 4.2 Overview of terminal S3
6.3 4.3 Overview of main menu
6.4 4.4 Overview steering menu
7 5 Technical data
7.1 5.1 GPS PILOT
8 6 Prepare machine
8.1 6.1 General information
8.2 6.2 Switch off and secure the machine
8.3 6.3 Carry out before commissioning
8.4 6.4 Initial commissioning machine
8.5 6.5 Initial commissioning correction signal
8.6 6.6 GPS PILOT
9 7 Operation
9.1 7.1 General information
9.2 7.2 BASELINE HD base station
9.3 7.3 Field trip with GPS PILOT
10 8 Malfunction and remedy
10.1 8.1 General information
10.2 8.2 Errors and measures
11 9 Maintenance
11.1 9.1 General information
11.2 9.2 Electrics / Electronics
11.3 9.3 Maintenance instructions
12 10 Service
12.1 10.1 General information
13 11 Decommissioning and disposal
13.1 11.1 General information
14 12 EC declaration of conformity
14.1 12.1 GPS PILOT – B82
15 13 Homologation
15.1 13.1 GPS PILOT – B82
16 14 technical terms and abbreviations
16.1 14.1 GPS PILOT

00 1400 859 2.pdf

Table of Content:
1 Quick guide CROP SENSOR Basic
1.1! Attention: Read the installation and operating instructions before commissioning.
1.2 1. CROP SENSOR Operation
2 Attention: If the application rate is limited by the min/max quantity, this is only possible on the work screen via the display
3 2. Status and error messages

00 1402 752 1.pdf

Table of Content:
1 Important information! Important information!
1.1 ATTENTION

00 2348 299 0.pdf

Table of Content:
1 CEMIS 700
2 Table of Contents
3 1 Introduction
3.1 1.1 General information
3.2 1.2 Intended use
4 2 Security
4.1 2.1 Safety instructions
5 3 Product description
5.1 3.1 Overview and functionality
5.2 3.2 Type plates and identification numbers
6 4 Information on the product
6.1 4.1 Software version
7 5 Control and display elements
7.1 5.1 CEMIS 700
8 6 Technical data
8.1 6.1 CEMIS 700
9 7 Operation
9.1 7.1 CEMIS 700
9.2 7.2 Terminal Settings
10 8 Maintenance
10.1 8.1 Maintenance
11 9 Decommissioning and disposal
11.1 9.1 General information
12 10 technical terms and abbreviations
12.1 10.1 Terms and explanations

00 2666 665 5.pdf

Table of Content:
1 GPS PILOTGPS PILOT FLEX
2.1 1.1 Homologation
3.1 2.1 Homologation
4.1 3.1 Homologation
5.1 4.1 Homologacin
6.1 5.1 Homologao