Claas LINER 3000 (605) Swathers Operator Manual DE

File List:

– 00 0188 614 7.pdf

00 0188 614 7.pdf

Table of Content:
1 1 Machine overview
2 2 Introduction
2.1 2.1 General information
2.2 2.2 Identification of the machine
3 3 Content
4 4 Safety instructions
4.1 4.1 Particular attention should be paid
4.2 4.2 For safety
4.3 4.3 Safety sticker with warning symbols
5 5 Technical data
6 6 Carry out before initial commissioning
6.1 6.1 Adjustments to the tractor
6.2 6.2 Assembling/adjusting the rake
7 7 Carry out before each start-up
8 8 Attaching/removing the machine
8.1 8.1 Mounting the machine
8.2 8.2 Dismantling/shutting down the machine
9 9 Driving and Transport
9.1 9.1 Road traffic
9.2 9.2 Transport position with ISOBUS Terminal
9.3 9.3 Transport position with control panel
9.4 9.4 Before transport
9.5 9.5 Before swiveling into working position
9.6 9.6 Working position with ISOBUS Terminal
9.7 9.7 Working position with control panel
9.8 9.8 Before field use
9.9 9.9 Unload/load machine
10 10 Operation – CLAAS Communicator
10.1 10.1 CLAAS Communicator
10.2 10.2 Service Menu
11 11 Operation – ISOBUS Terminal
11.1 11.1 Display
11.2 11.2 Program ISOBUS terminal
11.3 11.3 Hand control
11.4 11.4 Basic setting (initialization)
11.5 11.5 Operating hydraulic valves manually
12 12 Operation – Control panel
12.1 12.1 Control panel
12.2 12.2 Settings on the control panel
12.3 12.3 Hand control
12.4 12.4 Basic setting (initialization)
12.5 12.5 Emergency operation
12.6 12.6 Operating hydraulic valves manually
13 13 Field operation
13.1 13.1 Insert rake
13.2 13.2 Additional equipment
14 14 Malfunction and remedy
14.1 14.1 General faults
14.2 14.2 Error messages on the display (rake with ISOBUS terminal)
15 15 Maintenance
15.1 15.1 Important maintenance instructions
15.2 15.2 Maintenance table
15.3 15.3 Lubricant table
15.4 15.4 Drives
15.5 15.5 Brakes
15.6 15.6 Setting work
15.7 15.7 Rotary chassis
15.8 15.8 Tires
15.9 15.9 Hydraulics
15.10 15.10 Fasteners
15.11 15.11 Winterization suggestions
16 16 Lubrication plan
16.1 Lubricants
16.2 Lubrication intervals