Claas Maxflex 930-560 (825) Combines Service Information FR

File List:

00 0306 267 1.pdf

00 0306 267 1.pdf:

Instructions for use
Contents
1 Introduction
1.1 General instructions
1.1.1 Validity of the notice
1.1.2 Information regarding this user manual
1.1.3 Icons and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Notes on maintenance
1.1.7 Notes regarding warranty
1.1.8 Spare parts and technical questions
1.2 Use in accordance with instructions
1.2.1 Use in accordance with instructions
1.2.2 Reasonably foreseeable misuse
2 Security
2.1 Recognize the warnings
2.1.1 Warning pictogram
2.1.2 Signal word
2.2 Safety tips
2.2.1 Meaning of the instructions for use
2.2.2 Observe warning pictograms and warnings
2.2.3 Requirements for all people who work with the machine
2.2.4 Dangerous areas
2.2.5 Do not stand between the machine and the front tool
2.2.6 Passengers
2.2.7 Couple the machine with the front tool or cutting carriage
2.2.8 Risk of injury due to rotating shafts
2.2.9 Constructive modifications
2.2.10 Optional equipment and spare parts
2.2.11 Operation only after proper commissioning
2.2.12 Technical condition
2.2.13 Risks in the event of damage to the machine
2.2.14 Maintain safety devices in operational capacity
2.2.15 Personal safety equipment
2.2.16 Wear suitable clothing
2.2.17 Remove dirt and loose objects
2.2.18 Prepare the machine for road travel
2.2.19 Inappropriate operating consumables
2.2.20 Safety in handling operating consumables and secondary consumable materials
2.2.21 Environmental protection and disposal
2.2.22 Electric shock from the electrical system
2.2.23 Liquids under pressure
2.2.24 Work only on the stopped machine
2.2.25 Maintenance and repair work
2.2.26 Machine elements recorded and loads
2.2.27 Risks due to welding work
2.3 Safety marking
2.3.1 Structure of warning pictograms
2.3.2 Warning pictograms on the front tool
3 Description of the machine
3.1 Overview and mode of operation
3.1.1 Overview
3.1.2 Overview of workouts
3.1.3 Overview of the hydraulic system
3.1.4 Lighting overview
3.1.5 MAXFLEX operating mode
3.1.6 Operating mode of the flexible cutter bar
Serving mode
Operating mode
Operating mode
3.2 Optional machine equipment
3.2.1 Outer fingers of the reel
3.2.2 AUTO CONTOUR probe
3.2.3 Anti-winding device
3.2.4 Lighting
3.3 Nameplates and identification numbers
3.3.1 Front tool nameplate
3.4 Machine information
3.4.1 Sticker
4 Control and display elements
4.1 Front tool
4.1.1 Control elements
4.1.2 Display elements
5 Technical characteristics
5.1 MAXFLEX
5.1.1 Authorized machines
5.1.2 Dimensions
5.1.3 Weight
5.1.4 Reel
5.1.5 Feed auger
5.1.6 Cutting widths
5.1.7 Mower
5.2 Operating consumables
5.2.1 Lubricants
6 Preparing the machine
6.1 Stop and immobilize the machine
6.1.1 Stop and immobilize the machine.
6.2 Load the front tool
6.2.1 Load the front implement and secure it
6.3 Install the front tool
6.3.1 Install the front tool
6.3.2 Prepare for locking
6.3.3 Hanging the front tool
6.3.4 Lock the front tool
6.3.5 Install the cardan shaft
6.3.6 Hanging the PTO shaft protection chain
6.3.7 Install the multicoupler
6.3.8 Setting the front implement on the combine harvester information system
6.4 Remove the front tool
6.4.1 Remove the front tool
6.4.2 Remove the multicoupler
6.4.3 Remove the cardan shaft
6.4.4 Unlock the front tool
6.4.5 Unhook the front tool
6.5 Harvest collection
6.5.1 Install the reel safety supports
6.5.2 Loosen the reel safety supports
6.6 Feed auger
6.6.1 Adapt the scraper profiles according to the supply channel
6.7 Cutting device
6.7.1 Install the cutter bar protection device
7.1 Driving the machine
7.1.1 Prepare for road travel
7.1.2 Adjusting the parking position
Adjusting the parking position with the controls in the cabin
Adjust the parking position with the controls on the front implement
7.1.3 Adjust the cleaning position
Adjust the cleaning position with the controls on the front tool
7.2 Work
7.2.1 Prepare to move into the field
7.2.2 Adjust the working position
Adjust the working position with the controls in the cabin
7.2.3 Setting the AUTO CONTOUR operating mode
Set the operating mode with CEBIS
Notes on operating modes
7.2.4 Check crop absorption
7.3 Cereal harvest
7.3.1 Adjusting the front implement to the grain harvest
7.3.2 Mechanically lock the cutting deck
7.4 Soybean harvest
7.4.1 Adjust the front implement according to the soybean harvest
7.4.2 Mechanically unlock the cutting deck
7.4.3 Adjust cutting height for soybean harvest
7.5 Electrical and electronic system
7.5.1 Connecting and disconnecting lighting*
Adjusting the lighting with the controls in the cabin
Adjust the lighting using the controls on the front tool*
7.6 Management
7.6.1 Unfold the LASER PILOT*
7.6.2 Fold LASER PILOT*
7.7 Harvest collection
7.7.1 Mount the divider
7.7.2 Remove the divider
7.7.3 Adjust the divider
7.7.4 Install the divider tips
7.7.5 Remove the divider tips
7.7.6 Install the exterior deflector*
7.7.7 Remove the exterior deflector*
7.7.8 Hydraulically unlocking and locking the cutting deck
Hydraulically lock the cutting deck with the adjustment elements in the cabin
Hydraulically unlock the cutting deck with the adjustment elements in the cabin
7.7.9 Adjust the reel position
Adjust the position with CEBIS
Adjust the position with the controls in the cabin
7.7.10 Adjust the reel fingers
7.8 Feed auger
7.8.1 Adjust the scraper profiles of the feed auger
7.8.2 Adjust the position of the feed auger
7.8.3 Adjust the feed auger fingers
7.8.4 Remove the worm sheet extensions
7.8.5 Install the worm sheet extensions
7.8.6 Change feed auger speed
7.9 Cutting device
7.9.1 Install the corn lifter
7.9.2 Remove the corn lifter
7.9.3 Changing the knife drive speed
7.10 Ground guidance
7.10.1 Adjust the skates
8 Faults and solutions
8.1 Front tool
8.1.1 Improve harvest flow
8.1.2 Harvest collection
8.1.3 Feed auger
8.1.4 Mower
8.1.5 Ground guidance
8.2 Hydraulic system
8.2.1 Balancing the reel hydraulic cylinders
8.3 Electrical and electronic system
8.3.1 Prepare welding work
8.4 Harvest collection
8.4.1 Check the basic reel setting
8.4.2 Replacing the reel fingers
8.5 Feed auger
8.5.1 Replace feed auger fingers with quick lock
8.5.2 Remove the dust plate
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or every day
9.1.2 Every 100 operating hours
9.1.3 Every 250 operating hours
9.1.4 Annually or every 500 hours of service
9.1.5 Preservation measures for the front tool
9.2 Lubrication plan
9.2.1 Lubricate the lubrication points every 10 operating hours
Valid for: MONTANA
9.2.2 Lubricate the lubrication points every 100 operating hours
9.2.3 Lubricate the lubrication points every 250 operating hours
9.3 Workouts
9.3.1 Setting drives
9.3.2 Remove the belt (R01)
9.3.3 Install the belt (R01)
9.3.4 Adjust the belt (R01)
9.3.5 Remove the chain (K01)
9.3.6 Install the chain (K01)
9.3.7 Adjust the chain (K01)
9.3.8 Remove the chain (K02)
9.3.9 Install the chain (K02)
9.3.10 Adjust the chain (K02)
9.4 Hydraulic system
9.4.1 Check the tightness of the hydraulic system
9.4.2 Check hydraulic hoses
Marking of hydraulic hoses
9.5 Harvest collection
9.5.1 Clean the cutting deck
9.6 Cutting device
9.6.1 Replacing the knives
9.6.2 Replacing the segmented knife
Install the blade connector (C)
Assemble the knife segments (A) with the reinforcing plate
Assemble the knife segments (B) without reinforcing plate
9.6.3 Check equalizers*
Check Low Equalizers
Check high equalizer
9.6.4 Checking the upper finger*
Check high equalizer
Control top finger up
Control upper finger down
9.6.5 Replace the blade section
9.6.6 Replacing short double fingers
9.6.7 Replace split double fingers
9.7 Ground guidance
9.7.1 Cleaning the skates
9.7.2 Adjust the pad relief
9.7.3 Adjust cross arm relief
9.7.4 Replacing the wear pads
9.7.5 Replace the traction strap
Adjust the traction strap
10 Decommissioning and disposal
10.1 General instructions
10.1.1 Decommissioning and disposal
11 Declaration of conformity
11.1 MAXFLEX
11.1.1 Declaration of conformity for CE