Claas Maxflex 930-770 (534) Combines Operator Manual ES

File List:

00 0301 967 7.pdf

00 0301 967 7.pdf:

1. Introduction
1.1 General information
1.1.1 Validity of the manual
1.1.2 Information relating to this instruction manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Maintenance instructions
1.1.7 Information regarding warranty
1.1.8 Spare parts and technical questions
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable misuse
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Meaning of the instruction manual
2.2.2 Observe graphic danger symbols and alarm indications
2.2.3 Requirements for all people working with the machine
2.2.4 Danger zones
2.2.5 Position yourself between the machine and the head
2.2.6 Accompanying persons
2.2.7 Attach the machine to a header or transport trailer
2.2.8 Risk of injury due to rotating shafts
2.2.9 Construction changes
2.2.10 Optional equipment and spare parts
2.2.11 Use only after correct commissioning
2.2.12 Technical status
2.2.13 Danger due to machine breakdowns
2.2.14 Keep protective devices operational
2.2.15 Personal protective equipment
2.2.16 Wear appropriate clothing
2.2.17 Remove dirt and loose objects
2.2.18 Prepare the machine for road traffic
2.2.19 Unsuitable consumables
2.2.20 Safe handling of consumables and auxiliary materials
2.2.21 Environmental protection and waste disposal
2.2.22 Electrical shock from electrical equipment
2.2.23 Liquids under pressure
2.2.24 Work only on the stopped machine
2.2.25 Maintenance work and repair work
2.2.26 Machine parts and lifted loads
2.2.27 Danger from welding work
2.3 Safety signage
2.3.1 Structure of graphic hazard symbols
2.3.2 Graphic danger symbols on the head
3 Machine Description
3.1 Summary and operation
3.1.1 Summary
3.1.2 Storage of the instruction manual
3.1.3 MAXFLEX operating mode
3.2 Optional machine equipment
3.2.1 Cereal probe
3.2.2 Stone collection plate
3.2.3 Drainer
3.2.4 External reel tines
3.2.5 Anti-winding protection
3.2.6 Extension of the exterior dividers
3.2.7 Lighting
3.3 Identification plates and identification numbers
3.3.1 Head identification plate
3.4 Machine information
3.4.1 Adhesives
4 Control and display instruments
4.1 Head
4.1.1 Control field
5 Technical data
5.1 MAXFLEX
5.1.1 Eligible machines
5.1.2 Dimensions
5.1.3 Weights
5.1.4 Cutting widths
5.1.5 Windlass
5.1.6 Feed auger
5.1.7 Mowing device
5.2 Inputs
5.2.1 Lubricants
6 Preparation of the machine
6.1 Turn off the machine and secure it
6.1.1 Turn off the machine and secure it
6.2 Load the head
6.2.1 Load and tie down the head
6.3 Assemble the head
6.3.1 Assemble the head
6.3.2 Prepare the bolting
6.3.3 Attach the head
6.3.4 Locking the head
6.3.5 Assemble the cardan shaft
6.3.6 Attach the cardan shaft protection chain
6.3.7 Installing the multiple coupling
6.3.8 Adjusting the header in the combine on-board information system
6.4 Disassemble the head
6.4.1 Disassemble the head
6.4.2 Dismantling the multiple coupling
6.4.3 Disassemble cardan shaft
6.4.4 Unlock the head
6.4.5 Unhook the head
6.5 Harvest harvest
6.5.1 Place the safety supports of the windlass
6.5.2 Release the safety supports of the windlass
6.6 Feed auger
6.6.1 Adapt the scraper strips to the feed channel
6.7 Mowing device
6.7.1 Mount the protection device to the cutter bar
7 Management
7.1 Driving the machine
7.1.1 Prepare for road traffic
7.1.2 Prepare the field trip
7.1.3 Adjust the rest position
7.1.4 Adjust the working position
7.1.5 Before use for work
7.1.6 Control the collection of harvest material
7.2 Cereal harvest
7.2.1 Adjust the header for cereal harvesting
7.2.2 Latching the cutting mechanism table
7.2.3 Assemble the grain probe*
7.3 Soybean harvest
7.3.1 Adjust the header for soybean harvesting
7.3.2 Dismantle the grain sensor stirrup*
7.3.3 Unlocking the cutting mechanism table
7.4 Address
7.4.1 Deploy LASER PILOT*
7.5 Electrical and electronic system
7.5.1 Turn lighting on and off*
Manage head lighting
Manage lighting from the cabin
7.6 Harvest harvest
7.6.1 Mounting the crop divider
Adjust crop divider
7.6.2 Assemble the tips of the crop divider
7.6.3 Dismantle the tips of the crop divider
7.6.4 Assemble the outer separator*
7.6.5 Remove the outer separator*
7.6.6 Adjust reel tine
7.7 Feed auger
7.7.1 Adjusting the feed auger scraper strips
7.7.2 Adjust the position of the feeding auger
7.7.3 Adjust the feed auger fingers
7.7.4 Remove the extensions from the auger plate
7.7.5 Assemble the auger plate extensions
7.7.6 Modify the speed of the feeding auger
7.8 Mowing device
7.8.1 Adjust the cutting height to the soybean crop
7.8.2 Assembling and disassembling the crop lifters with quick release
Assemble the harvest lifters
Dismantle the crop lifters
7.8.3 Assembling and disassembling the harvest lifters
7.8.4 Modify the speed of the blade drive
7.9 Guided by the ground
7.9.1 Adjust the sliding pads
8 Incident and solution
8.1 Causes and solution
8.1.1 Improve flow
8.1.2 Harvest harvest
8.1.3 Feed auger
8.1.4 Mowing device
8.1.5 Ground guidance
8.2 Electrical and electronic system
8.2.1 Prepare welding work
8.3 Hydraulic installation
8.3.1 Compensate the hydraulic cylinders of the reel
8.4 Harvest harvest
8.4.1 Carry out the basic adjustment of the height of the reel
8.4.2 Change the reel tines
8.5 Feed auger
8.5.1 Change the fingers of the feed auger with quick closure
8.5.2 Change feed auger fingers
8.5.3 Remove the dust protection plate
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 hours of service or daily
9.1.2 Every 100 hours of service
9.1.3 Every 250 hours of service
9.1.4 Every 500 hours of service or annually
9.1.5 Preserve the head
9.2 Greasing scheme
9.2.1 Grease the lubrication points every 10 hours of service
Valid for: MONTANA
9.2.2 Grease the lubrication points every 100 hours of service
9.2.3 Grease the lubrication points every 250 hours of service
9.3 Drives
9.3.1 Adjust the drives
9.3.2 Remove the belt (R01)
9.3.3 Assemble the belt (R01)
9.3.4 Adjust the belt (R01)
9.3.5 Remove the chain (K01)
9.3.6 Assemble the chain (K01)
9.3.7 Adjust the chain (K01)
9.3.8 Remove the chain (K02)
9.3.9 Assemble the chain (K02)
9.3.10 Adjust the chain (K02)
9.4 Hydraulic installation
9.4.1 Check the hydraulic hoses
9.5 Harvest harvest
9.5.1 Clean the cutting mechanism table
9.6 Mowing device
9.6.1 Change blades
9.6.2 Change segmented blades
Assemble the blade connection
Assemble the blade segments (A) with reinforcement plate
Assemble the blade segments (B) without reinforcement plate
9.6.3 Adjust the pushers*
9.6.4 Adjust the upper fingers*
9.6.5 Change the blade section
9.6.6 Replacing short double fingers
9.6.7 Replacing split double fingers
9.7 Guided by the ground
9.7.1 Clean the skates
9.7.2 Adjust the skid discharge
9.7.3 Adjusting the relief of the transverse swing arm
9.7.4 Replacing the wear pads
9.7.5 Change the shooting belt
Adjust the pull tape
9.7.6 Change the shooting belt
Adjust the pull tape
10 Decommissioning and waste disposal
10.1 General information
10.1.1 Decommissioning and waste disposal
11 Declaration of conformity
11.1 Head
11.1.1 EC declaration of conformity