File List:
00 0288 579 4.pdf
00 0297 292 1.pdf
00 0288 579 4.pdf:
MAXFLO 1200MAXFLO 1050MAXFLO 900MAXFLO 750
Contents
1 Introduction
1.1 Notes regarding the instructions
1.1.1 Validity of the notice
1.1.2 Information regarding this user manual
1.1.3 Symbols and instructions
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Notes on maintenance
1.1.7 Notes regarding warranty
1.1.8 Spare parts and technical questions
1.2 Use in accordance with instructions
1.2.1 Use in accordance with instructions
1.2.2 Reasonably foreseeable misuse
2 Security
2.1 Recognize the warnings
2.1.1 Warning pictogram
2.1.2 Signal word
2.2 Safety tips
2.2.1 Meaning of the instructions for use
2.2.2 Obey warning stickers and warnings
2.2.3 Requirements for all people who work with the machine
2.2.4 Risk areas
2.2.5 Do not stand between the machine and the front tool
2.2.6 Coupling the machine to the front implement or transport trolley
2.2.7 Risk of injury due to rotating shafts
2.2.8 Constructive modifications
2.2.9 Optional equipment and spare parts
2.2.10 Operation only after proper commissioning
2.2.11 Technical condition
2.2.12 Danger due to damage to the machine
2.2.13 Maintain protective devices capable of operating
2.2.14 Personal safety equipment
2.2.15 Wear suitable clothing
2.2.16 Remove dirt and loose objects
2.2.17 Prepare the machine for road travel
2.2.18 Unsuitable operating consumables
2.2.19 Safety of use of operating consumables and secondary operating consumables
2.2.20 Environmental protection and disposal
2.2.21 Electrical discharge at the electrical system level
2.2.22 Liquids under pressure
2.2.23 Only carry out work on the machine when it is stopped
2.2.24 Maintenance and repair work
2.2.25 Machine elements recorded and loads
2.2.26 Danger due to welding work
2.3 Safety marking on the machine
2.3.1 Structure of warning pictograms
2.3.2 Warning pictograms on the front tool
3 Description of the machine
3.1 Overview and mode of operation
3.1.1 MAXFLO Overview
3.1.2 Mode of operation
3.2 Optional machine equipment
3.2.1 Outer fingers of the reel
3.2.2 Additional feed augers
3.3 Nameplates and identification numbers
3.3.1 Front tool nameplate
3.4 Machine information
3.4.1 Sticker
4 Controls and displays
4.1 Hydraulic system
4.1.1 Display elements
5 Technical characteristics
5.1 MAXFLO
5.1.1 Authorized machines
5.1.2 Dimensions
5.1.3 Weight
5.1.4 Reel
5.1.5 Power group
5.1.6 Lubricants
5.1.7 Hydraulic oil
6 Preparing the machine
6.1 Stop and immobilize the machine
6.1.1 Stop and immobilize the machine
6.2 Before commissioning
6.2.1 To be carried out before the first commissioning
6.3 Load the front tool
6.3.1 Load the front implement and secure it
6.4 Install the front tool
6.4.1 Install the front tool
6.4.2 Prepare for locking
6.4.3 Identify hydraulic oil
6.4.4 Hanging the front tool
6.4.5 Lock the front tool
6.4.6 Install the cardan shaft
6.4.7 Install the multiple coupling
6.4.8 Adjust the stabilizing wheels to the working position
6.5 Remove the front tool
6.5.1 Remove the front tool
6.5.2 Remove the multiple coupling
6.5.3 Remove the cardan shaft
6.5.4 Unlock the front tool
6.5.5 Unhook the front tool
6.5.6 Adjust the training wheels to the transport position
6.6 Hydraulic system
6.6.1 Removing the transport lock from the hydraulic oil tank
6.6.2 Filling the hydraulic circuit of the stabilizing wheels
6.7 Management
6.7.1 Install the LASER PILOT*
6.8 Harvest collection
6.8.1 Install the reel safety supports
6.8.2 Remove the safety supports from the reel
6.8.3 Modify the front implement for swath placement
Remove the feed auger
Shift the conveyor
6.8.4 Modify the front implement for swath placement
6.8.5 Modify the front tool for beating
6.9 Cutting device
6.9.1 Install the left side rapeseed separation blade switch*
6.9.2 Install the cutter bar protection device
7.1 Safety instructions for use
7.1.1 Avoiding collisions with the cabin roof
7.2 Driving the machine
7.2.1 Prepare to move into the field
7.2.2 Prepare for road travel
7.3 Work
7.3.1 Before work
7.3.2 Check crop absorption
7.4 Rapeseed harvest
7.4.1 Install the rapeseed equipment*
7.4.2 Remove the rapeseed equipment*
7.5 Management
7.5.1 Expand LASER PILOT*
7.6 Harvest collection
7.6.1 Adjust the reel fingers
7.6.2 Install the divider bar
7.6.3 Install the rice divider
7.7 Power group
7.7.1 Adjust the position of the feed auger
7.7.2 Adjust the feed screw fingers
7.7.3 Change feed auger speed
7.7.4 Reverse the front tool
Reverse the MAXFLO conveyor
7.7.5 Adjust conveyor speed
7.8 Cutting device
7.8.1 Engage the rapeseed separation blade
7.8.2 Install the corn lifter*
7.8.3 Remove the corn lifter*
7.8.4 Adjust the skates
Indoor skates
Outdoor skates
8 Faults and solutions
8.1 Front tool
8.1.1 Improve harvest flow
8.1.2 Harvest feeding
8.1.3 Feed auger
8.1.4 Cutting device
8.1.5 Ground guidance
8.2 Hydraulic system
8.2.1 Bleed air from reel hydraulic cylinders
8.3 Harvest collection
8.3.1 Carry out the basic reel height adjustment
8.3.2 Replacing the reel fingers
8.3.3 Adjust the reel speed sensor
8.4 Power group
8.4.1 Replace the feed auger fingers
8.4.2 Replace the conveyor
9 Maintenance
9.1 Overview of maintenance frequencies
9.1.1 Before the start of the harvest
9.1.2 After the first 50 hours of operation
9.1.3 After the first 100 hours of operation
9.1.4 Every 50 operating hours
9.1.5 Every 100 operating hours
9.1.6 Every 250 operating hours
9.1.7 Every 500 operating hours or every year
9.1.8 After harvest
9.1.9 Preservation measures for the front tool
9.2 Lubrication plan
9.2.1 Lubricate the lubrication points every 100 operating hours
9.2.2 Lubricate the lubrication points every 250 operating hours
9.3 Transmission, clutch and cardan shaft
9.3.1 Overview of gearboxes
9.3.2 Check the oil level of the angle gearbox (G1)
9.3.3 Replace the oil in the angle gearbox (G1)
Drain the oil
Pour the oil
9.3.4 Check the oil level of the right angle gearbox (G2)
9.3.5 Replace the oil in the spur gear box (G2)
Drain the oil
Pour the oil
9.3.6 Check the oil level of the angle gearbox (G3)
9.3.7 Replace the angle gearbox oil (G3)
Drain the oil
Pour the oil
9.3.8 Check the oil level of the spur gear reducer (G4)
9.3.9 Replacing the oil in the spur gearbox (G4)
Drain the oil
Pour the oil
9.4 Workouts
9.4.1 Adjusting the reel drive chain
9.5 Hydraulic system
9.5.1 Checking the hydraulic oil level
9.5.2 Replacing the hydraulic oil
Change the hydraulic oil
Refill hydraulic oil
9.5.3 Replace the hydraulic oil tank return filter
9.6 Power group
9.6.1 Adjust conveyor tension
9.7 Cutting device
9.7.1 Replacing the knives
9.7.2 Adjust the blade clamps
Check the lower blade clamps
Check the wear plate
Check the wear of the upper blade clamp
Check the high blade clamp
9.7.3 Check equalizers
9.7.4 Replace the blade section
9.7.5 Replace double fingers
9.7.6 Align the double fingers
10 Decommissioning and disposal
10.1 Decommissioning and disposal
10.1.1 Decommissioning and disposal
11 CE declaration of conformity
11.1 MAXFLO
11.1.1 Declaration of conformity for CE
00 0297 292 1.pdf:
VARIO 1250 / 1050MAXFLEX 1250 / 1050MAXFLO 1250 / 1050C900 – C450V900 – V540
Contents
1 Introduction
1.1 Information about this notice
1.1.1 Validity of the notice
1.1.2 Notes on the instructions for use
2 Security
2.1 Recognize the warnings
2.1.1 Warning pictogram
2.1.2 Signal word
2.2 Safety tips
2.2.1 Instructions for use and other sources of information
Meaning of the instructions for use
2.2.2 Invisible laser radiation of laser category 1M
2.2.3 Use in accordance with the provisions
3 Technical characteristics
3.1 LASER PILOT
3.1.1 LASER PILOT
4.1 Management
4.1.1 Unfold the LASER PILOT
4.1.2 Adjust the LASER PILOT
Prepare the field
Adjust the LASER PILOT according to the product harvested
Adjust the LASER PILOT according to the product harvested
Prepare for the tuning process
Check the LASER PILOT setting
Adjust the LASER PILOT vertically
Check the horizontal preset of the LASER PILOT
Precisely adjust the LASER PILOT horizontally
5 Incidents and remedies
5.1 Overview of faults
5.1.1 LASER PILOT
Claas Operator Manual PDF
Claas RANGER 975-964, 970, 960 und PLUS (516) Telehandlers Operator Manual DE
Claas Operator Manual PDF
Claas Operator Manual PDF
Claas RANGER 928, 925, 920 und PLUS (510) Telehandlers Operator Manual DE
Claas Operator Manual PDF
![](https://automanual.net/wp-content/uploads/2024/04/claas-maxflo-1200-538-combines-operator-manual-fr-1.jpg)