Claas Nexos 260-210 S Stage V (A65) Tractors Operator Manual EN

File List:

00 0301 051 0.pdf
00 0303 482 0.pdf
00 1169 984 0.pdf
00 1173 634 1.pdf
00 1175 164 1.pdf

00 0301 051 0.pdf:

PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 0303 482 0.pdf:

PROFI CAM 4
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Structural changes
2.2.3 Optional equipment and spare parts
2.2.4 Operation only following proper putting into operation
2.2.5 Technical status
2.2.6 Respecting technical limit values
Respecting technical limit values
2.2.7 Hazards when driving on roads and fields
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Identification plates
3.3 Information on the product
3.3.1 CE marking
4 Operating and display elements
4.1 Camera system
4.1.1 Camera system monitor
4.1.2 CEBIS
4.2 Menu structure
4.2.1 Main menu
4.2.2 menu
4.2.3 menu
4.2.4 menu
4.2.5 menu
4.2.6 menu
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electric and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Putting out of operation and disposal
10.1 General information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms

00 1169 984 0.pdf:

Sensor case for tractors Stage IIIB, IV and VSensor case for tractors Stage IIIB, IV and VSensor case for Stage IIIB, IV and V tractors
Contents
1 Sensorkoffer – Sensor case – Sensor suitcase – Stage IIIB, IV & V
1.1 Auflistung Kofferinhalt
1.1 Listing case content
1.1 Presentation of the contents of the suitcase

00 1173 634 1.pdf:

NEXOS 210 S, M, L, LD, MDStage V
Table of contents
1 To this Operator’s Manual
1.1 Notes on the manual
1.1.1 Validity of the operator’s manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Software developments
1.1.6 Qualified specialist workshop
1.1.7 Notes on maintenance
1.1.8 Notes on warranty
1.1.9 Spare parts and technical questions
1.1.10 Transferring the tractor to a third party
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 European regulations
2.2.2 Importance of the Operator’s Manual
2.2.3 Observing safety decals and warnings
2.2.4 Requirements made on all persons working with the tractor
2.2.5 Children in danger
2.2.6 High risk areas
2.2.7 Presence between tractor and machine
2.2.8 Persons riding on the machine
2.2.9 Hitching an implement or trailer to the tractor
2.2.10 Risk of injury on the PTO shaft
2.2.11 Danger of injury on the universal drive shaft
2.2.12 Do not attach a frontloader
2.2.13 Avoid hazards posed by frontloaders
2.2.14 Structural changes
2.2.15 Optional equipment and spare parts
2.2.16 Forestry work
2.2.17 Controlling the tractor when it is running
2.2.18 Operation only after commissioning has been properly performed
2.2.19 Technical condition
2.2.20 Danger from damage on the tractor
2.2.21 Respecting technical limit values
2.2.22 Danger from machine parts running on
2.2.23 Keeping safety devices functional
2.2.24 Personal protective equipment
2.2.25 Wearing suitable clothing
2.2.26 Removing dirt and loose objects
2.2.27 Preparing the tractor for road travel
2.2.28 Hazards when driving on the road and on the field
2.2.29 Parking the tractor securely
2.2.30 Unsuitable operating utilities
2.2.31 Safe handling of operating and auxiliary utilities
2.2.32 Fuel is harmful to your health
2.2.33 Refrigerant is harmful to your health
2.2.34 Environmental protection and disposal
2.2.35 Keeping the cab free of chemicals
2.2.36 Handling of crop protection agents and fertilisers
2.2.37 Fire hazard
2.2.38 Lethal electrocution from overhead lines
2.2.39 Behaviour in case of voltage flash-over from overhead lines and when lightning strikes
2.2.40 Electrocution by electrical system
2.2.41 Noise may cause health problems
2.2.42 Vibrations may cause health problems
2.2.43 Pressurised fluids
2.2.44 Compressed air
2.2.45 Toxic exhaust gas
2.2.46 Hot surfaces
2.2.47 Accessing and leaving the machine safely
2.2.48 Working on the tractor only when shut down
2.2.49 Maintenance operations and repair work
2.2.50 Raised tractor parts and loads
2.2.51 Hazard posed by welding work
2.2.52 Checking and charging the battery
2.3 Safety decals on the tractor
2.3.1 Layout of safety decals
2.3.2 Warning symbols
2.4 Safety devices
2.4.1 Wheel chock
3 Tractor description
3.1 Overview
3.1.1 Front right-hand view
Platform version
Cab version
3.1.2 Right-hand view of the tractor
3.1.3 Rear left-hand view
Platform version
Cab version
3.1.4 Rear left-hand view of the tractor
3.1.5 Category 4 filtration overview
3.2 Identification plates and vehicle identification number
3.2.1 Tractor identification plate
Tractor identification number (VIN code)
Decoding the Types/Variants/Versions
Tractor serial number
3.2.2 Engine identification plate
3.2.3 Transmission identification plate
3.2.4 Front axle identification plate
Four-wheel drive tractor with a rigid front axle
Four-wheel drive tractor with a suspended front axle
Tractor with two-wheel drive
3.2.5 Platform identification plate
3.3 Information on the tractor
3.3.1 Lifting points
3.3.2 Transmission dipstick
3.3.3 Brake fluid
3.3.4 Rear power take-off speed
3.3.5 Engine bonnet
3.3.6 Removing the engine side covers
3.3.7 Tractor lubrication
3.3.8 Mechanical rear linkage
3.3.9 Rear control valve pressure connectors
3.3.10 Hydraulic control valve front pressure taps
3.3.11 Emergency exit
3.3.12 Cab category
Identification of air filter elements in category 3 operating mode
Identification of air filter elements in category 4 operating mode
4 Operating and display elements
4.1.1 Driving position
Right-hand side controls (tractor with electronic linkage and electrohydraulic control valves)
Right-hand side controls (tractor with electronic linkage and mechanically-controlled hydraulic control valves)
Right-hand side controls (tractor with mechanical linkage and mechanically-controlled hydraulic control valves)
Left-hand controls
Category 4 filtration controls
4.1.2 Dashboard
Tractor with mechanical reverser
Tractor with clutchless reverser
Dashboard switches
4.1.3 Controls on the right-hand post
4.1.4 Cab top controls
Heating, ventilation and air conditioning controls
Rear screen wiper
Overhead light
Radio (pre-equipment)
4.1.5 Hinged panels and windows
Hinged panels
Left and right doors
Opening tailgate
Windscreen open
Sun blind
4.2 Operator’s platform
4.2.1 Driving position
NEXOS S/M/L with electrohydraulic rear linkage
NEXOS S/M/L with mechanical rear linkage
NEXOS LD/MD with mechanical rear linkage
Controls located on the left-hand side of the driving position
4.2.2 Work light controls
4.3 Operating and display elements
4.3.1 Instrument panel
4.3.2 Instrument panel digital display
4.3.3 Electronic linkage controls
4.3.4 Rear mechanical linkage controls
4.4 Hydraulic system
4.4.1 Hydraulic controls
Front linkage
Converting single/double action hydraulic control valves
4.4.2 Mechanical rear linkage external controls
4.5 Electric and electronic system
4.5.1 Key-operated ignition
4.5.2 Control lever for indicator lights and horn
4.5.3 Electrohydraulic rear linkage external controls
4.5.4 Power supply socket
4.6 Assembled parts/Machine housing
4.6.1 Sight
4.6.2 Tool box
4.6.3 Cab unit mountings
5 Technical specifications
5.1 NEXOS
5.1.1 Dimensions
Cab version
Platform version
5.1.2 Tractor weight
5.1.3 Engine
NEXOS 210 S/M/L/LD/MD
5.1.4 Gearbox
Mechanical transmission
Electrohydraulic transmission
5.1.5 Tractor travel speeds
5.1.6 Without doubler and 12/12 transmission – 30 km/h version
5.1.7 Mechanical reverser and mechanical or electrohydraulic doubler and 24/24 transmission – 40 km/h version
1.8 Electrohydraulic reverser and mechanical doubler and 24/24 transmission – 40 km/h version
5.1.9 Electrohydraulic reverser and electrohydraulic doubler and 24/12 tssion – 40 km/h version
5.1.10 Tractor ground speed
5.1.11 Front axle (two-wheel drive)
Front axle CARRARO 373788
5.1.12 Front drive axle (four-wheel drive)
Suspended front axle
Rigid front axle
Front/Rear inter-axle ratio
NEXOS MD
NEXOS LD
5.1.13 Rear axle
5.1.14 NEXOS S: Table of front track widths
Front axle (four-wheel drive tractor)
Non-reinforced variable track wheel rim
Reinforced variable track wheel rim
Rim with fixed wheel disc
Front axle (two-wheel drive tractor)
5.1.15 NEXOS S: Table of rear tracks
5.1.16 NEXOS M: Table of front track widths
Front axle (four-wheel drive tractor)
Non-reinforced variable track wheel rim
Reinforced variable track wheel rim
m with fixed wheel disc
Front axle (two-wheel drive tractor)
5.1.17 NEXOS M: Table of rear tracks
5.1.18 NEXOS L: Table of front track widths
Front axle (fourheel drive tractor)
Non-reinforced variable track wheel rim
Reinforced variable track wheel rim
Rim with fixed wheel disc
Front axle (two-wheel drive tractor)
5.1.19 NEXOS L: Table of rear tracks
5.1.20 NEXOS LD: Table of front track widths
Non-reinforced variable disc rim
Reinforced variable disc rim
Rim with fixed wheel disc
5.1.21 NEXOS LD: Table of rear tracks
Variable track wheel rim
5.1.22 NEXOS MD: Table of front track widths
Non-reinforced variable disc rim
Reinforced variable disc rim
Rim with fixed wheel disc
5.1.23 NEXOS MD: Table of rear tracks
Rims with variable wheel disc
5.1.24 Tyre combinations
NEXOS LD
NEXOS MD
5.1.25 Tyre technical specifications
5.1.26 Brakes
5.1.27 Direction
5.1.28 Rear linkage
TCE6 electronic rear linkage
Mechanical rear linkage
5.1.29 Front linkage
5.1.30 Rear hitch
5.1.31 Rear power take-off
5.1.32 Front power take-off
5.1.33 Hydraulic circuits
Open centre circuit 60 l/min
87 l/min open centre circuit
5.1.34 Hydraulic control valve combinations
Hydraulic control valves on the 60 l/min circuit
Hydraulic control valves on the 85 l/min circuit
Electrohydraulic control valves on the 85 l/min circuit
5.1.35 Electrical circuit
5.1.36 Sound levels
Driver’s exposure to noise level (according to annex XIII of the delegated regulation 1322/2014)
Passers-by exposure to noise level (according to annex III of delegated regulation 2015/96)
5.1.37 Seat vibration level
5.1.38 Level of protection provided by the cab
5.1.39 Level of protection provided by the platform
5.1.40 Tractor ballast
Tractor with four-wheel drive
Tractor with two-wheel drive
5.1.41 Maximum authorised tow weights
Tractor with four-wheel drive
Tractor with two-wheel drive
5.1.42 Total authorised laden weight
Gross vehicle weight above 3500 kg
Gross vehicle weight above 3500 kg
5.2 Operating utilities
5.2.1 Lubricants and hydraulic oils
5.2.2 Engine coolant
5.2.3 Brake fluid
5.2.4 Air conditioning circuit
6 Tractor preparation
6.1 Securing the tractor
6.1.1 Stop the tractor and secure it
6.1.2 Securing the tractor
6.2 Prior to putting into operation
6.2.1 Preparing for initial commissioning
6.2.2 Preparing for commissioning
6.2.3 Hitching and connecting the implement
6.3 Engine
6.3.1 Fuel
Quality requirement
Special notes on biofuels
Handling fuel
6.3.2 Topping up the fuel tank
6.4 Frame
6.4.1 Track adjustment
Tracking method
6.4.2 Adjusting the steering stops
Adjustment
6.4.3 General information about the tyres
6.4.4 Inflation pressure
Effect on soil compaction
Effect on consumption
6.4.5 Specifications
Load index
Speed symbol
6.5 Brake
6.5.1 Coupling the brake pedals
6.5.2 Trailer hydraulic brake
6.6 Steering
6.6.1 Adjusting the position of the steering wheel
6.7 Rear power lift
6.7.1 Axle stands
6.7.2 Top link
6.7.3 Rear linkage stabilisers
NEXOS S/M/LD/MD
6.7.4 Vertical hydraulic tie rod (without stabiliser option and without hydraulic sideshift)
6.7.5 Vertical hydraulic tie rod, stabilisers and hydraulic sideshift
6.7.6 Automatic hitches
6.7.7 Rear linkage external controls
Mechanical rear linkage
Electrohydraulic rear linkage
6.7.8 Hitch and unhitch an implement
Recommendations for hitching an implement
Hitching an implement
Unhitching an implement
6.8 Front power lift
6.8.1 Fitting caps on the pressure taps
6.8.2 Converting the single action/double action front linkage
6.8.3 Locking the front linkage
6.8.4 Top link
6.8.5 Lower links for the front linkage
6.8.6 Automatic hitches
6.8.7 Hitching/unhitching an implement
Hitching recommendations
Hitching
Unhitching
6.9 Rear power take-off
6.9.1 Hitch and unhitch an implement
Connecting and disconnecting the rear power take-off universal drive shaft
Hitching an implement to the rear power take-off
Unhitching an implement from the rear power take-off
6.10 Hitch
6.10.1 Recommendations
6.10.2 Calculating the maximum tow load (not including CUNA clevis)
6.10.3 Clevis drawbars
6.10.4 Swinging drawbar
Tightening the clevis
Safety device
6.10.5 Pick-up hitch
6.11 Rear hydraulic system
6.11.1 Rear pressure taps
Connecting or disconnecting the pressure taps
Free return to the tank
6.11.2 Single/double action setting
6.11.3 Selecting the behaviour adopted by the hydraulic control valve after the control lever is released
6.12 Front hydraulic system
6.12.1 Front hydraulic pressure taps
Connecting/disconnecting the hydraulic pressure taps
Free return to the tank
6.12.2 Lateral pressure connectors
Connecting/Disconnecting the pressure connectors
6.13 Electric and electronic system
6.13.1 Electrical sockets
Light socket for the trailer or implement
Power supply socket
6.13.2 Adjusting the engine bonnet dipped beam headlights
6.14 Cab and operator’s platform
6.14.1 Adjusting the rear-view mirrors
Cab version
Telescopic rear-view mirrors (depending on option)
Interior rear-view mirror
Platform version
6.14.2 Folding roll hoop
6.14.3 Folding roll hoop
6.14.4 Adjusting the driver’s seat
6.14.5 Cable routing
6.14.6 Storage
6.14.7 Category 2 filter
6.14.8 Category 4 filtration module
Operating mode in category 3
Operating mode in category 4
Switch from category 4 (or 3) to category 2 operating mode
6.15 Assembly parts and machine body
6.15.1 Ballast
6.15.2 Balancing the tractor with mounted implements
Summary table
6.15.3 Fitting and removing front ballast weights
6.15.4 Opening and closing covers
One-piece bonnet
Opening the engine bonnet
Closing the engine bonnet
Side covers
Removing the main side covers
Fitting the side covers
Right-hand side cover
Removing the right-hand side cover
Fitting the right-hand side cover
6.15.5 Opening and closing the engine covers
Opening the one-piece engine bonnet
Removing the engine side covers
Refitting the engine side covers
Closing the one-piece engine bonnet
6.15.6 Front attachment points
6.15.7 Additional chassis
Front additional chassis
Side additional chassis (tractor not equipped with front linkage)
Side additional chassis (tractor equipped with front linkage)
6.16 Transport of the tractor
6.16.1 Transport
7 Operation
7.1 Driving and transportation
7.1.1 Preparing for road travel
7.1.2 Prepare for driving in the field
7.1.3 Driving with the implements
Heavy-duty pulling operations
7.2 Engine
7.2.1 Running in
7.2.2 Start the engine
Preliminary operations
Start the engine
Recommendations
7.2.3 Accelerator pedal
7.2.4 Hand accelerator
7.2.5 Engine speed memories
Activating an engine speed memory
Manually adjusting the engine speed memories (method 1)
Manually adjusting the engine speed memories (method 2)
7.2.6 Engine particulate filter
Particulate filter filling percentage
Instrument panel
Operating logic
Particulate filter automatic regeneration
Particulate filter stationary regeneration
Maintenance regeneration
Replace the particulate filter
7.2.7 Switching off the engine
7.3 Transmission, clutch and driveshaft
7.3.1 Shifting the direction of travel reverser into neutral
Tractors with mechanical reverser
Tractors with clutchless reverser (electrohydraulic)
7.3.2 Shift the transmission to neutral
7.3.3 Selecting the tractor’s direction of travel
Recommendations
Tractors with mechanical reverser
Tractors with clutchless reverser (electrohydraulic)
7.3.4 Clutch
Clutch pedal
7.3.5 Speed selection
7.3.6 Range selection
7.3.7 Range doubler
Mechanical range doubler
Electrohydraulic range doubler
7.3.8 Differential lock
7.4 Chassis
7.4.1 Engaging the front axle
Front axle automatic mode
Front axle permanent mode
7.4.2 Automated front axle engagement system according to the steering angle of the wheels
Using the automated front axle engagement system according to the steering angle of the wheels
Configuring the automated front axle engagement system according to the steering angle of the wheels
7.4.3 Suspended front axle
Front axle suspension activation switch
Front axle height adjustment potentiometer
Suspension activation indicator light
Activating the front axle suspension
Automatic mode
Manual mode
Locked mode
7.5 Brake
7.5.1 Service brakes
7.5.2 Parking brake
7.6 Electronic rear linkage
7.6.1 Warning light
7.6.2 Road transport safety
7.6.3 Operating the linkage
7.6.4 Selecting the electrohydraulic rear linkage modes
7.6.5 Position control
7.6.6 Draft control
7.6.7 Upper stop
7.6.8 Lowering speed
7.6.9 Rapid soil entry function
7.6.10 External controls
7.7 Mechanical rear linkage
7.7.1 Checking the position of the mechanical rear linkage
7.7.2 Draft control
7.7.3 Mixed control
7.7.4 Floating linkage
7.7.5 Adjusting the sensitivity of the rear linkage
7.7.6 External controls
7.8 Front power lift
7.8.1 Using the front linkage
Mechanically-controlled hydraulic control valve
Electrohydraulic control valve
7.9 Rear power take-off
7.9.1 Selecting the rear power take-off speed
Selecting the power take-off speed proportional to the tractor’s ground speed
7.9.2 Usage
Power take-off with assisted mechanical engagement
Power take-off with electrohydraulic engagement
7.9.3 Stationary working
7.10 Front power take-off
7.10.1 Using the front power take-off
Engaging the front power take-off
Stopping the front power take-off
7.10.2 Stationary working
7.11 Rear hydraulic system
7.11.1 Association between the controls and the rear pressure taps
Hydraulic control valves with mechanical controls (NEXOS S/M/L)
Hydraulic control valves with mechanical controls (NEXOS LD/MD)
Electrohydraulic control valves (NEXOS S/M/L)
7.11.2 Mechanically-controlled hydraulic control valves
7.11.3 Electrohydraulic control valves
Electrohydraulic control valve controls
Activating the electrohydraulic control valves
Electrohydraulic control valve linear controls
Linear control positions
Linear control floating position
Hydraulic timer
Electrohydraulic control valves joystick
Joystick floating position
Other functions
7.11.4 Hydraulic timer
7.11.5 Adjusting the hydraulic flow rates
Flow divider
Motorized flow controller
Hydraulic circuits with two hydraulic pumps
Hydraulic circuits with three hydraulic pumps
Specific features of electrohydraulic control valves
7.11.6 Stationary working
7.12 Front hydraulic system
7.12.1 Front pressure connectors and controls
Mechanically-controlled auxiliary hydraulic control valves
Auxiliary electrohydraulic control valves
7.12.2 Lateral pressure connectors and controls
Mechanically-controlled auxiliary hydraulic control valves without duplicator
Mechanically-controlled auxiliary hydraulic control valves with duplicator
Auxiliary electrohydraulic control valves without duplicator
Auxiliary electrohydraulic control valves with duplicator
7.13 Electric and electronic system
7.13.1 Manual circuit breaker and offset positive terminal
7.14 Cab and operator’s platform
7.14.1 Instrument panel display
Information menu on the dashboard display
Information available:
Dashboard display menu
Particulate filter (DPF)
Inhibiting the strategy to reduce the volume of unburnt fuel
Language
Units of measurement
Transmission errors
Engine errors
Recalibrating the tractor speed
Exiting the user menu
7.14.2 Manual air conditioning
Windscreen de-icing
7.14.3 Category 2 filtration system
7.14.4 Category 4 filtration system
Perform before commissioning
Commissioning
8 Faults and remedies
8.1 Alarms
8.1.1 Operating faults
Viewing error codes
8.1.2 Primary alarms
8.1.3 Secondary alarms
8.1.4 Other alarms
8.1.5 Operating fault on the category 4 filtration module
8.1.6 Suspended front axle operating fault
8.1.7 Overview of filter system faults
8.1.8 Resolution procedures for specific faults
Tractor error codes
Engine error codes
8.2 Engine
8.2.1 Faults caused by a low fuel level
8.3 Frame
8.3.1 Fitting a jack
8.3.2 Replacing a wheel
8.3.3 Towing the tractor
Towing with the engine running
Towing with the engine stopped
Towing clevises
8.3.4 Digging out the tractor
Digging out a tractor
Digging out a tractor by towing
8.4 Electric and electronic system
8.4.1 Fuses and relays
Main fuse and relay box (NEXOS S/M/L)
Tractor with mechanical reverser (NEXOS S/M/L)
Tractor with hydraulic reverser (NEXOS LD/MD)
Main fuse and relay box (NEXOS LD/MD)
Tractor with mechanical reverser (NEXOS LD/MD)
Tractor with hydraulic reverser (NEXOS LD/MD)
Right-hand post fuse box
Left-hand post fuses and relays
Engine front part fuse and relay box
Electrohydraulic control valve fuse and relay box
Battery relays and fuses (NEXOS S/M/L)
Cab version
Platform version
Battery relays and fuses (NEXOS LD/MD)
Category 4 filtration module relays and fuses
Front axle suspension fuses and relays
8.4.2 Overview of the bulbs
9 Maintenance
9.1 Maintenance Information
9.1.1 Personal protective equipment
9.1.2 Appropriate use
9.1.3 Switching off the engine and securing the tractor
9.1.4 Cleaning and tidying risk areas
9.1.5 Welding advice
9.1.6 Protective devices on the tractor
9.1.7 Engine
Alternator
Engine lubrication
Engine cooling
Engine belts
9.1.8 Wheels and tyres
9.1.9 Braking system
9.1.10 Direction
9.1.11 Implements driven by a power take-off
9.1.12 Air conditioning
9.1.13 Hydraulic circuit
9.1.14 Electrical system
9.1.15 Energy accumulators
9.1.16 Spare parts
9.1.17 Cleaning and protection
9.1.18 Working at height
9.1.19 Handling heavy components
9.1.20 Maintenance operations under the cab or the platform
9.1.21 Lifting the front of the tractor
9.2 Maintenance interval overview
9.2.1 After the first 100 hours of operation
9.2.2 After the first 600 hours of operation
9.2.3 Every 10 hours of operation
9.2.4 Every 100 hours of operation
9.2.5 Every 600 hours of operation
9.2.6 Every 1200 hours of operation
9.2.7 Every 2400 hours of operation
9.2.8 Every three months
9.2.9 Every six months
9.2.10 Every two years
9.3 Lubrication plan
9.3.1 Greasing points – 20 hrs
9.3.2 Greasing points – 100 hrs
Tractors with rigid front axle
Tractors with suspended front axle (NEXOS S/M/L)
9.3.3 Lubrication points – 600 hrs
Tractor with suspended front axle (NEXOS S/M/L)
9.4 Maintenance engine
9.4.1 Bleeding the water present in the fuel separator prefilter
9.4.2 Replace the fuel filters
9.4.3 Bleeding air from the injection circuit
9.4.4 Check the engine oil level
9.4.5 Changing the engine oil
Resetting the instrument panel
9.4.6 Replace the engine oil filter
9.4.7 Replace the oil vapour recycling filter
9.4.8 Checking the engine coolant level
9.4.9 Check the cooling system seal
9.4.10 Cleaning the coolers (NEXOS S/M/L)
9.4.11 Cleaning the coolers (NEXOS LD/MD)
9.4.12 Check the engine alternator and water pump belts
9.4.13 Replace the engine alternator and water pump belts
Removing/fitting the alternator belt
Assembly diagram
9.4.14 Cleaning the engine air filter (NEXOS S/M/L)
9.4.15 Cleaning the engine air filter (NEXOS LD/MD)
9.4.16 Replacing the engine air filter (NEXOS S/M/L)
9.4.17 Replacing the engine air filter (NEXOS LD/MD)
9.4.18 Replacing the engine air filter safety cartridge (NEXOS S/M/L)
9.4.19 Replacing the engine air filter safety cartridge (NEXOS LD/MD)
9.4.20 Check the air intake seal
9.5 Maintenance operations gearbox
9.5.1 Check the clutch pedal clearance
9.5.2 Adjust the clutch clearance (depending on equipment)
9.6 Maintanance operations chassis
9.6.1 Check the oil level of the front axle differential casing
Tractor with rigid front axle
Tractor with suspended front axle
9.6.2 Replace the front axle differential unit oil
Tractor with rigid front axle
Tractor with suspended front axle
9.6.3 Check the level of the front axle final drive oil
Tractor with rigid front axle
Tractor with suspended front axle
9.6.4 Replace the front axle final drive oil
Tractor with rigid front axle
Tractor with suspended front axle
9.6.5 Replacing the front axle breather
9.6.6 Check the tightness of the wheel discs on the hubs
9.6.7 Check the tightness of the wheel discs on the rims
9.6.8 Checking the condition of the wheels and tyres and checking the tyre in