File List:
00 0298 239 7.pdf
00 0301 051 0.pdf
00 0303 482 0.pdf
00 0298 239 7.pdf:
1 Introduction
Introduction
Validity
2 Table of contents
3 Preface
Of special importance
Identification plate
4 Safety Rules
Identification of warnings and hazard signs
Intended use
Avoidable incorrect applications
General safety regulations and safety precautions
De-commissioning and disposal
Safety support
Safety decals with pictorials
5 Specifications
PU 300 HD
PU 380 HD
6 Assembly
Loading and unloading the front attachment
Unpacking the front attachment
Assembling the front attachment
Fitting the support wheels
7 Prior to Operation
Check and observe the following before putting into operation
Mounting the pick-up
Unlocking
Mounting the Pickup
Setting the lock mechanism
Hydraulic connections
Fitting the universal drive shaft (PU 380 HD / PU 380 / PU 300 HD / PU 300 – JAGUAR Typ 492 / 491)
Setting the dog clutch (only PU 380 HD – JAGUAR Type 493)
Working position
Working position land wheels
Working height
Setting the land wheels
Setting the rear prop wheels
Pivoting frame
Unlocking oscillation
Locking oscillation
Move the stand upwards
Left prop stand
Right prop stand
Adjusting Pickup lowering rate
JAGUAR 900 / 890 / 870 / 850 / 830 – Type 493 / 492
JAGUAR 880 / 860 / 840 / 820 – Type 491
Prior to transportation
Transport position
Transport position of land wheels
Transport on public roads
Driving on public roads
PU 300 HD / PU 300
PU 380 HD / PU 380
Removing/parking the Pickup
Extending the prop stand
Left prop stand
Right prop stand
Interlocking the pivoting frame
Removing universal drive shaft
Swing the land wheels outwards
Disconnect the hydraulic hoses
Release the Pickup.
8 Operation
Raising/lowering the Pickup
JAGUAR 900 / 890 / 870 / 850 / 830 – Type 493 / 492
JAGUAR 880 / 860 / 840 / 820 – Type 491
Hydraulically raising/lowering the roll-type crop guard or the feeder auger
JAGUAR 900 / 890 / 870 / 850 / 830 – Type 493 / 492
JAGUAR 880 / 860 / 840 / 820 – Type 491
Pick-up operation
Setting the Contour system (ground pressure setting)
JAGUAR 900 / 890 / 870 / 850 / 830 – Type 493 / 492
JAGUAR 880 / 860 / 840 / 820 – Type 491
Feed extension
Matching the pick-up
Feed auger speed adjustment
Roll-type crop guard with hydraulically lift
Optional equipment
Hydraulic auger lift
Covering strips for the feed rollers
Mounting kit for central gauge wheel (PU 300 / PU 300 HD only)
Hydraulically folding land wheels
9 Maintenance
Important maintenance instructions
Hydraulic system
Lubrication
Wheels / tyres
Drive systems
Angle drive gearbox
PU 380 HD – JAGUAR Type 493
PU 380 HD / PU 380 / PU 300 HD / PU 300 – JAGUAR Type 492 / 491
Couplings
Drive chain tensioning
Drive chain – Main drive
Drive chain – pick up
Drive chain – feed auger
Drive shaft
General information for universal shafts
Spring adjustement
Suspension springs
Hydraulic system
Hydraulic hoses
Screwed connections
Connecting elements
Tyre pressure:
Winter Storage
10 Lubrication chart
Safety rules
Lubricants
Lubrication
00 0301 051 0.pdf:
PROFI CAM 3
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Warranty notes
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Observing safety decals and warnings
2.2.3 Optional equipment and spare parts
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Position of identification plates
3.2.2 Explanation of PROFI CAM identification plate
3.3 Information on the product
3.3.1 CE marking
4 Operating and control elements
4.1 Camera system
4.1.1 Camera system monitor
4.2 Menu structure
4.2.1 Main menu
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
5.1.4 Degree of protection against foreign bodies and water
6 Preparing the product
6.1 Shutting down and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
6.2.4 Connecting the camera electrics
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electrical and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
8.1.2 Replacing the switch box fuse
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Placing out of operation and disposal
10.1 General Information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms
00 0303 482 0.pdf:
PROFI CAM 4
Table of contents
1 Introduction
1.1 Notes on the manual
1.1.1 Validity of manual
1.1.2 Information about this Operator’s Manual
1.1.3 Symbols and notes
1.1.4 Optional equipment
1.1.5 Qualified specialist workshop
1.1.6 Maintenance information
1.1.7 Notes on warranty
1.1.8 Spare parts and technical questions
1.2 Intended use
1.2.1 Intended use
1.2.2 Reasonably foreseeable misuse
2 Safety
2.1 Identifying warnings
2.1.1 Hazard signs
2.1.2 Signal word
2.2 Safety rules
2.2.1 Meaning of Operator’s Manual
2.2.2 Structural changes
2.2.3 Optional equipment and spare parts
2.2.4 Operation only following proper putting into operation
2.2.5 Technical status
2.2.6 Respecting technical limit values
Respecting technical limit values
2.2.7 Hazards when driving on roads and fields
3 Product description
3.1 Overview and method of operation
3.1.1 How the PROFI CAM works
3.2 Identification plates and identification number
3.2.1 Identification plates
3.3 Information on the product
3.3.1 CE marking
4 Operating and display elements
4.1 Camera system
4.1.1 Camera system monitor
4.1.2 CEBIS
4.2 Menu structure
4.2.1 Main menu
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
5 Technical specifications
5.1 PROFI CAM
5.1.1 Monitor
5.1.2 Camera
5.1.3 Switch box
6 Preparing the product
6.1 Switching off and securing the machine
6.1.1 Switching off and securing the machine
6.2 Prior to putting into operation
6.2.1 Carry out prior to operation
6.2.2 Installing the sun protection
6.2.3 Aligning the camera
7 Operation
7.1 Monitor
7.1.1 Switching on the monitor
7.1.2 Calling up the menu
7.1.3 Setting a menu item
7.1.4 Setting the image orientation
7.1.5 Setting automatic screen darkening
7.1.6 Image mirroring
7.1.7 Setting the trigger view
7.1.8 Setting the follow-up time for trigger view
7.1.9 Setting the display mode
7.1.10 Activating/deactivating a display mode
8 Faults and remedies
8.1 Electric and electronic system
8.1.1 Overview of problems on PROFI CAM camera system
9 Maintenance
9.1 Maintenance intervals
9.1.1 Every 10 operating hours or daily
9.2 Camera system
9.2.1 Checking the camera system for dirt
9.2.2 Cleaning the camera
9.2.3 Cleaning the switch box
9.2.4 Cleaning the monitor
10 Putting out of operation and disposal
10.1 General information
10.1.1 Putting out of operation and disposal
11 Technical terms and abbreviations
11.1 Abbreviations
11.1.1 Units
11.1.2 Abbreviations
11.1.3 Technical terms