Claas Quadrant 2200 Advantage (756) Balers Assembly Instruction EN

File List:

00 0290 143 2.pdf
00 0290 500 1.pdf
00 0290 520 0.pdf
00 0290 587 1.pdf
00 0292 077 0.pdf
00 0292 437 0.pdf
00 0296 048 0.pdf
00 0296 052 0.pdf
00 0299 079 0.pdf
00 0299 499 0.pdf
00 0300 374 1.pdf
00 1325 214 4.pdf

00 0290 500 1.pdf:

QUADRANT 2200 AdvantageQUADRANT 3200QUADRANT 3400
Table of contents
1 To this manual
1.1 General Information
1.1.1 General points
1.1.2 Machines that can be equipped
2.1 General Information
2.1.1 General points
2.1.2 Use in accordance with the original specifications
2.2 Safety instructions
2.2.1 Definition of hazard information
2.2.2 General safety and accident prevention advice
2.2.3 Parking the machine
3 Bill of material
3.1 Parts kit
3.1.1 Drawbar intermediate plate – 00 0863 234.1
4 Mounting
4.1 Introduction
4.1.1 General points
4.2 Machine preparation
4.2.1 Securing the baler
4.2.2 Removing the coupling
4.3 Fitting the kit
4.3.1 Fitting the intermediate plate
4.3.2 Fitting the coupling
4.4 Checks
4.4.1 Amplitude of travel
4.4.2 Play between the intermediate plate and the complete drawbar
4.4.3 Tightening torques

00 0290 520 0.pdf:

QUADRANT 2200 AdvantageQUADRANT 3200
Table of contents
1 To this manual
1.1 General Information
1.1.1 General points
1.1.2 Machines that can be fitted
2.1 General Information
2.1.1 General points
2.1.2 Use in accordance with the original specifications
2.2 Safety instructions
2.2.1 Definition of hazard information
2.2.2 General safety and accident prevention advice
2.2.3 Parking the machine
3 Bill of material
3.1 Parts kit
3.1.1 Kit 00 0856 345.0 – Balers with welded ladder
3.1.2 Kit 00 0863 952.0 – Balers with aluminium ladder
4 Mounting
4.1 General Information
4.1.1 Tightening torques
4.2 Machine preparation
4.2.1 Securing the baler
4.2.2 Removing the back guard
4.3 Fitting the kit
4.3.1 Assemble and fit the left-hand safety guard
For balers up to 756 00265 and 744 00844, equipped with a welded ladder
QUADRANT 2200 Advantage
QUADRANT 3200
QUADRANT 3200 and 2200 Advantage
4.3.2 Fit the left-hand safety guard
For balers from 756 00266 and 744 00845, equipped with an aluminium ladder
4.3.3 Fit the back support
4.3.4 Assemble and fit the right-hand safety guard
For balers up to 756 00265 and 744 00844, equipped with an aluminium ladder
QUADRANT 2200 Advantage
QUADRANT 3200
4.3.5 Assemble and fit the right-hand safety guard
For balers from 756 00266 and 744 00845, equipped with an aluminium ladder
4.3.6 Fit the front right handle
For balers up to 756 00265 and 744 00844, equipped with a welded ladder

00 0290 587 1.pdf:

QUADRANT 2200 AdvantageQUADRANT 3200
Table of contents
1 To this manual
1.1 General Information
1.1.1 General points
1.1.2 Machines that can be equipped
2.1 General Information
2.1.1 General points
2.1.2 Use in accordance with the original specifications
2.2 Safety instructions
2.2.1 Definition of hazard information
2.2.2 General safety and accident prevention advice
2.2.3 Parking the machine
3 Bill of material
3.1 Parts kit
3.1.1 Kit 00 0867 225.0 – Roller locking kit
4 Mounting
4.1 General Information
4.1.1 Tightening torques
4.2 Machine preparation
4.2.1 Securing the baler
4.2.2 Preparing the bale chute
4.3 Fitting the kit
4.3.1 Premounting the roller locking device
4.3.2 Fitting the roller locking discs
4.3.3 Fitting the roller locking device

00 0292 077 0.pdf:

QUADRANT 3200QUADRANT 2200 Advantage
Table of contents
1 To this manual
1.1 General Information
1.1.1 General points
1.1.2 Machines that can be equipped
2.1 General Information
2.1.1 General points
2.1.2 Use in accordance with the original specifications
2.2 Safety instructions
2.2.1 Definition of hazard information
2.2.2 General safety and accident prevention advice
2.2.3 Parking the machine
3 Bill of material
3.1 Parts kit
3.1.1 Kit 00 1326 370.0 – Pick-up modification kit for chopper
4 Mounting
4.1 Machine preparation
4.1.1 Securing the baler
4.1.2 Removing the pick-up
Pick-up lift
Right-hand side
Left-hand side
4.2 Fitting the kit
4.2.1 Preparing the pick-up
Right-hand side
Left-hand side
Middle section
4.3 Mounting
4.3.1 Fitting the pick-up
Right-hand side
Left-hand side
Adjusting the chain tensioner
Removing the lock
Pick-up lift

00 0299 499 0.pdf:

QUADRANT 3300/3200/2200/2100ROLLANT 454/455 UNIWRAPVARIANT 385/380/365/360
Table of contents
1 To this manual
1.1 General information
1.1.1 General points
1.1.2 Machines that can be equipped
2.1 General information
2.1.1 General points
2.1.2 Use in accordance with the original specifications
2.2 Safety instructions
2.2.1 Definition of hazard information
2.2.2 General safety and accident prevention advice
2.2.3 Parking the machine
3 Bill of material
3.1 Parts kit
3.1.1 Contents of the kit 00 1351 126 0
4 Mounting
4.1 Introduction
4.1.1 Securing the baler
4.2 Fitting the kit
4.2.1 Fitting the kit