Claas ROLLANT 240 (749) Baler Technical System DE

File List:

– 00 0293 484 0.pdf
– 00 0293 485 0.pdf

00 0293 484 0.pdf

Table of Content:
1 Hydraulic system technology ROLLANT 240/250/254/255
3 Chapter 1_x000B_Wiring diagram for overall hydraulics
3.1 1.1 Standard circuit diagram without Rolland multifunction valve
3.2 1.2 Circuit diagram standard with multifunction valve Rollant 2
3.3 1.3 Comfort circuit diagram without Rollant multifunction valve 2
3.4 1.4 Comfort circuit diagram with Rollant multifunction valve 25
3.5 1.5 Circuit diagram ROLLANT for UNIWRAP_x000B_ up to machine no. 72600130
3.6 1.6 Circuit diagram ROLLANT for UNIWRAP_x000B_ from machine no. 72600131
4 Chapter 2 Valve componenwith pressure limitation ROLLANT 254, 25
4.6 2.6 Main valve block ROLLANT Comfort_x000B_ ROTOCUT, Pick-up, Roto
4.7 2.7 Circulation check valve, open/close tailgate with ROLLA
4.8 2.8 ROTOCUT knife ON/OFF with ROLLANT Standard
4.9 2.9 Lubricating oil pump
6 0293 484.0

00 0293 485 0.pdf

Table of Content:
1 Electric system technology ROLLANT 240/250
2 Structure of electrical circuit diagrams
4 central electrics
4.1 Central electrics Rollant 240/250 Standard
4.2 Central electrics Rollant 250 Comfort
4.3 UNIWRAP central electrics
5 Pin assignment of the modules
5.1 ROLLANT 240/250 Standard
5.2 ROLLANT 240/250 Comfort
5.3 UNIWRAP
6 Circuit diagram assignment of fuses and relays
7 circuit diagrams 01a – 40c
7.1 01a – Main power supply Rollant 240/250 Standard
7.2 01b – Main power supply Rollant 250 Comfort
7.3 01c – Main power supply Rollant 250 Comfort for UNIWRAP
7.4 01d – Main power supply UNIWRAP
7.5 04a – Circulation check valve (with central electrics) Rollant 250 Comfort
7.6 04b – Circulation check valve Rollant 250 Comfort for UNIWRAP
7.7 04c – UNIWRAP circulation check valve
7.8 05a – Terminal Rollant 250 Comfort
7.9 05b – Terminal UNIWRAP to mach. no. 726 00 130
7.10 06a – CAN bus, power supply module Rollant 240/250 Standard
7.11 06b – CAN bus, power supply module Rollant 250 Comfort
7.12 06c – CAN bus, power supply module Rollant 250 Comfort for UNIWRAP
7.13 06d – CAN bus, power supply module UNIWRAP up to mach. no. 72900130
7.14 06e – CAN bus, power supply module UNIWRAP from mach. no. 72900131
7.15 07a – Rotocut Rollant 240/250 Standard
7.16 07b – Rotocut Rollant 250 Comfort / Comfort for UNIWRAP
7.17 11a – Binding release Rollant 240/250 Standard
7.18 11b – Binding release Rollant 250 Comfort / Comfort for UNIWRAP
7.19 12a – Open / close tailgate Rollant 250 Comfort / Comfort for UNIWRAP
7.20 19a Loading / unloading bales UNIWRAP
7.21 20a – Raise and lower pick-up – Rollant 250 Comfort / Comfort for UNIWRAP
7.22 21a – Rotate wrapping arm – UNIWRAP
7.23 22a – Open/close film scissors, monitoring film tear – UNIWRAP
7.24 32a – Rear light, position light (with central electrics)
7.25 40a additional sockets
7.26 40b additional sockets
7.27 40c additional sockets
8 wire harnesses
8.1 Wiring harness A Part 1 (Rollant 250 Standard)
8.2 Wiring harness A Part 2 (Rollant 250 Standard)
8.3 Wiring harness B Part 1 (Rollant 250 Comfort / Rollant 250 Comfort for UNIWRAP)
8.4 Wiring harness B Part 2 (Rollant 250 Comfort / Rollant 250 Comfort for UNIWRAP)
8.5 Wiring harne9 Index
10 0293 485.0