Claas ROLLANT 255 RC (748) Baler Technical System DE

File List:

– 00 0293 484 0.pdf
– 00 0293 486 1.pdf
– 00 0293 487 0.pdf

00 0293 484 0.pdf

Table of Content:
1 Hydraulic system technology ROLLANT 240/250/254/255
3 Chapter 1_x000B_Wiring diagram for overall hydraulics
3.1 1.1 Standard circuit diagram without Rolland multifunction valve
3.2 1.2 Circuit diagram standard with multifunction valve Rollant 2
3.3 1.3 Comfort circuit diagram without Rollant multifunction valve 2
3.4 1.4 Comfort circuit diagram with Rollant multifunction valve 25
3.5 1.5 Circuit diagram ROLLANT for UNIWRAP_x000B_ up to machine no. 72600130
3.6 1.6 Circuit diagram ROLLANT for UNIWRAP_x000B_ from machine no. 72600131
4 Chaultifunctional valve with pressure limitation ROLLANT 254, 25
4.6 2.6 Main valve block ROLLANT Comfort_x000B_ ROTOCUT, Pick-up, Roto
4.7 2.7 Circulation check valve, open/close tailgate with ROLLA
4.8 2.8 ROTOCUT knife ON/OFF with ROLLANT Standard
4.9 2.9 Lubricating oil pump
6 0293 484.0

00 0293 486 1.pdf

Table of Content:
1 Electric system technology ROLLANT 254/255 and UNIWRAP
2 Structure of electrical circuit diagrams
4 central electrics
4.1 Central electrics ROLLANT 254/255 Standard
4.2 Central electrics ROLLANT 254/255 Comfort when equipped with
4.3 Central electrics with CCU (Claas Control Unit) at Ausrstun
4.4 Central electrics UNIWRAP
5 Pin assignment of the modules
5.1 Module A23 ROLLANT 254/255 Standard
5.2 Module CCU – ROLLANT 254/255 Comfort when equipped with
5.6 Module A20 CCU – ROLLANT 254/255 Comfort when equipped with
6 Circuit diagram assignment of fuses and relays
7 circuit diagrams 01a – 40a
7.1 01a – Main power supply ROLLANT 254/255 Standard
7.2 01b – Main power supply ROLLANT 254 / 255 Comfort with CCT
7.3 01c – Main power supply ROLLANT 255 Comfort for UNIWRAP – with CCT
7.4 01d – Main power supply ROLLANT 254 / 255 Comfort with Communicator
7.5 01e – Main power supply ROLLANT 254 / 255 Comfort for UNIWRAP with Communicator
7.6 01f – Main power supply UNIWRAP
7.7 04a -NT 254/255 Standard
7.13 05b – Terminal ROLLANT 254/255 Comfort – with CCT
7.14 05c- Terminal 254/255 Comfort for UNIWRAP – with CCT
7.15 06a – CAN bus, power supply module ROLLANT 254/255 Standard
7.16 06b – CAN bus, power supply module ROLLANT 254/255 Comfort – with CCT
7.17 06c – CAN bus, power supply module ROLLANT 255 Comfort for UNIWRAP – with CCT
7.18 06d – CAN bus, power supply module ROLLANT 254/255 Comfort – with Communicator
7.19 06e – CAN bus, power supply module ROLLANT 255 Comfort for UNIWRAP with Communicator
7.20 06f – CAN bus, power supply module UNIWRAP up to mach. no. 130
7.21 06g – CAN bus, power supply module UNIWRAP from mach. no. 131
7.22 07a – Rotocut 254/255 Standard
7.23 07b – Rotocut ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with CCT
7.24 07c – Rotocut ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with communicator, reversing switch (Z48)
7.25, sensor reversing (B131)
7.26 11a – Binding release 254/255 Standard
7.27 11b – Binding release ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with CCT
7.28 11c – Binding release ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with communicator, tailgate closed switch (Z16)
7.29 11d – Binding release ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with communicator, tailgate closed sensor (B136)
7.30 12a – open / close tailgate ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with CCT
7.31 12b – Open / close tailgate ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with Communicator
7.32 19a – Loading / unloading bales UNIWRAP
7.33 20a – Raise pick-up lower ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with CCT
7.34 20b – Raise / lower pick-up ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with Communicator
7.35 21a – Turn wrapping arm UNIWRAP
7.36 40a – additional sockets ROLLANT 254/255 Comfort / Comfort for UNIWRAP – with Communicator
8 wire harnesses
8.1 Wiring harness A Part 1
8.2 Wiring harness A part 2
8.3 Wiring harness B part 1
8.4 Wiring harness B part 2
8.5 Wiring harness B part 3
8.6 Wiring harness C
8.7 Wiring harness D part 1
8.8 Wiring harness D Part 2
8.9 Wiring harness D part 3
8.10 Wiring harness E
8.11 Wiring harness K
8.12 Wiring harness L
8.13 Wiring or display
4.6 2.6 Push button test
5 3.0 Sensor test
5.1 Foil sensor
5.2 Stop bar impulse
5.3 Wrapping arm impulse
5.4 Basic position
5.5 Changing table above
5.6 Bales on changing table
5.7 Bales in tipping trough
5.8 Tipping trough bottom
5.9 Tailgate closed
5.10 Tailgate open
5.11 Winding start signal
5.12 Binding start signal
6 4.0 Malfunction table
7 0293 487.0