Claas Tucano 560-550 (L36) Combines Operator Manual FR

File List:

00 0302 525 2.pdf
00 0302 581 5.pdf

00 0302 525 2.pdf:

TUCANO 580 / 570 / 560TUCANO 450 / 430MONTANA
Contents
1 Introduction
1.1 Notes regarding the instructions
1.1.1 Validity of the notice
2 Security
2.1 Safety marking on the machine
2.1.1 Cabin warning pictogram
2.1.2 Power group warning pictogram
3 Description of the machine
3.1 Overview and mode of operation
3.1.1 MONTANA Overview
3.2 Nameplates and identification numbers
3.2.1 Drive axle nameplate
4 Control and display elements
4.1 Cabin and driving position
4.1.1 Control console
4.1.2 MONTANA control panel
5 Technical characteristics
5.1 TUCANO 580 / 570 / 560 / 450 / 430 MONTANA
5.1.1 Machine dimensions
5.1.2 Machine weight
Machine weight
Weight of the option
5.1.3 Dimensions of the hopper discharge tube in working position
5.1.4 Turning circle diameter
Measurement conditions
5.1.5 Sound pressure level and vibrations
5.1.6 Diesel engine of the machine
5.1.7 Mercedes-Benz OM 936 LA.E5 diesel engine
5.1.8 Hydrostatic forward drive
5.1.9 Variable height chassis
5.1.10 Overview of drive axle track gauge
5.1.11 Overview of steering axle track width
5.1.12 Track gauge table 01
5.1.13 Track gauge table 02
5.1.14 Track gauge table 03
5.1.15 Track gauge table 04
5.1.16 Track gauge table 05
5.1.17 Track gauge table 06
5.1.18 Track gauge table 07
5.1.19 Brakes
5.1.20 Mercedes-Benz OM 936 LA.E5 diesel engine battery
5.1.21 Width of the machine beater
5.1.22 Machine threshing system
5.1.23 Threshing body with APS threshing system
5.1.24 Machine separation system
5.1.25 Rotor separation system
5.1.26 Shaker separation system
5.1.27 Cleaning
5.1.28 Deposit of harvested product and deposit of straw
5.1.29 Hopper volume
5.1.30 Hopper emptying power
5.1.31 Central lubrication system*
5.2 Operating consumables
5.2.1 Lubricants
5.2.2 Hydraulic oils
6 Preparing the machine
6.1 Stop and immobilize the machine
6.1.1 Stop and immobilize the machine.
6.2 Prepare the machine for travel
6.2.1 Prepare for road travel
6.2.2 Prepare to move into the field
6.3 Power group
6.3.1 Check the anti-slip belts of the conveyor
6.4 Chassis
6.4.1 Place the machine on jack stands
6.4.2 Dismantling and installing the wheels
Remove the wheels
Install the wheels
Learn pulses per 100m
6.4.3 Procedure for adjusting the track width of the steering axle
6.4.4 Adapting the steering axle from transport position to working position
6.4.5 Place the machine on jack stands for the steering axle to swing
6.4.6 Adjusting the track width of the steering axle
6.4.7 Adjusting the track width of the steering axle
6.4.8 Select bores at the adjusting element
6.5 Assembly parts and bodywork
6.5.1 Place the additional weight on the machine
6.5.2 Install the weights for the folding front implements
7.1 Driving the machine
7.1.1 Operating the machine
Move the machine forward
Brake the machine
Stop the machine
Move the machine in reverse
7.2 Front tool
7.2.1 Cutting angle adjustment
7.3 Chassis
7.3.1 Select the MONTANA service mode
7.3.2 Lower the machine into transport position
7.3.3 Control of MONTANA functions
Checking the functions of the MONTANA on level ground
7.3.4 Connecting and disconnecting MONTANA automatic mode
Connect the automatic mode of the MONTANA
Disconnect automatic mode from MONTANA
7.3.5 Connecting and disconnecting the MONTANA hand control
7.3.6 Submit a report
7.3.7 Connecting and disconnecting the OVERDRIVE* service mode
7.3.8 Connecting and disconnecting the differential lock
7.3.9 Tow the machine out of the risk area
7.4 Brake
7.4.1 Coupling and uncoupling the brake pedals
8 Faults and solutions
8.1 Chassis
8.1.1 Overview of undercarriage failures
8.2 Electrical and electronic system
8.2.1 Overview of MONTANA Automatic mode faults
9 Maintenance
9.1 Overview of maintenance frequencies
9.1.1 Before the start of the harvest
9.1.2 After the first 100 hours of operation
9.1.3 After the first 500 hours of service
9.1.4 Every 10 operating hours or every day
9.1.5 Every 50 operating hours
9.1.6 Every 100 operating hours
9.1.7 Every 250 operating hours
9.1.8 Every 500 operating hours
9.1.9 Every 500 hours of service or annually
9.1.10 Every 1000 operating hours
9.1.11 Annually
9.2 Lubrication plan
9.2.1 Lubricate the left side lubrication points every 100 operating hours
9.2.2 Lubricate the right side lubrication points every 100 operating hours
9.2.3 Lubricate the left side lubrication points annually
9.2.4 Lubricate the right side lubrication points annually
9.3 Chassis
9.3.1 Remove and install the reinforcing sheet of the MONTANA drive axle
9.3.2 Lubricate the pivot rings of the wheel connecting rods in accordance with the lubrication instructions
9.3.3 Check the oil level of the drive axle gearbox
9.3.4 Replacing the drive axle gearbox oil
Change the oil
Fill with oil
9.3.5 Check the oil level of the axle support of the drive axle
9.3.6 Replacing the oil in the axle support of the drive axle
Change the oil
Fill with oil
9.3.7 Check the oil level of the drive axle wheel connecting rods
9.3.8 Replacing the oil in the drive axle wheel connecting rods
Change the oil
Fill with oil
9.4 Brake
9.4.1 Checking the air bleeding of the brake cylinders
9.5 Hydraulic system
9.5.1 Checking the hydraulic oil level
9.5.2 Replacing hydraulic oil and filters
Change the oil
Fill with oil
9.6 Power group
9.6.1 Bleed the air from the hydraulic cylinders for transverse regulation of the front implement