Claas VARIANT 485 480 385 380 RC RF (752) Baler Operator Manual DE

File List:

– 00 0290 518 0.pdf
– 00 0294 276 6.pdf
– 00 0294 601 0.pdf
– 00 0301 090 0.pdf
– 00 0301 385 7.pdf

00 0290 518 0.pdf

Table of Content:
2 1 Introduction
2.1 1.1 Generalities
2.2 1.2 Equipped machines
3 2 Security Consignments
3.1 2.1 Important
3.2 2.2 Security Consignments
4 3 Lot of parts
4.1 3.1 VARIANT 3XX – 00 0857 722 0
5 4 Mounting the guardrail
5.1 4.1 Description
5.2 4.2 Press preparation
5.3 4.3 Installation of the guardrail
7 1 Introduction
7.1 1.1 General
7.2 1.2 Machines to be equipped
8 2 Safety regulations
8.1 2.1 Important
8.2 2.2 Safety regulations
9 3 Parts list
9.1 3.1 VARIANT 3XX – 00 0857 722 0
10 4 Installing the railing
10.1 4.1 Description
10.2 4.2 Preparing the press
10.3 4.3 Installation of the railing
12 1 Introduction
12.1 1.1 General points
12.2 1.2 Machines that can be fitted
13 2 Safety advice
13.1 2.1 Important
13.2 2.2 Safety instructions
14 3 parts kit
14.1 3.1 VARIANT 3XX – 00 0857 722 0
15 4 Fitting the guard rail
15.1 4.1 Description
15.2 4.2 Preparing the baler
15.3 4.3 Fitting the guard rail
17 1 Introduction
17.1 1.1 General
17.2 1.2 Machine equipment
18 2 Safety instructions
18.1 2.1 Important
18.2 2.2 Safety instructions
19 3 Lotto di pezzi
19.1 3.1 VARIANT 3XX – 00 0857 722 0
20 4 Monday of protection
20.1 4.1 Description
20.2 4.2 Preparation of the press
20.3 4.3 Monday of protection
22 1 Introduction
22.1 1.1 General information
22.2 1.2 Applicable machines
23 2 Standards of security
23.1 2.1 Important
23.2 2.2 Standards of security
24 3 Lot of piezas
24.1 3.1 VARIANT 3XX – 00 0857 722 0
25 4 Mounting the body protection
25.1 4.1 Description
25.2 4.2 Press preparation
25.3 4.3 Colocation of body protection
27 1 ????????
28.1 2.1 ?????
28.2 2.2 ???????? ?? ????? ????????????
29 3 ???????? ???????
29.1 3.1 VARIANT 3XX – 00 0857 722 0
30 4 ?????? ?????
30.1 4.1 ????????
30.2 4.2 ?????????? ?????-??????????
30.3 4.3 ????????? ?????

00 0294 276 6.pdf

Table of Content:
1 flat baffle
2 settings (recommended values)
2.1 Roller presser
4 baffle plate and roller presser (optional)
5 Clearing Clogs
6 Attachment
7 Optimal Recording
8 Press chamber filling indicator (option)
9 General Recommendations

00 0294 601 0.pdf

Table of Content:
1 FR_0100.pdf
1.1 Notice of assembly and use
1.2 _x001C_Linen _x0013_ short linen_x001D_ kit and _x001C_Very short linen_x001D_ kit
2 FR_0001.pdf
2.1 Introduction
3 FR_0002_V2.pdf
3.1 Introduction
4 FR_0101.pdf
4.1 Security Consignments
5 FR_0102b_V2.pdf
5.1 Important
5.2 Characterization of indications on dangers
5.3 General Consignments for Security and Prevention of Accidents
5.4 Parking the machine
5.5 Use as intended
6 FR_0200.pdf
6.1 Notice of assembly
6.2 Linen and linen court kit
7 FR_0508_V2.pdf
7.1 Use of the press for other products
8 FR_0507_V2.pdf
8.1 Utilization for the pressing of very short flax
9 FR_0506_V2.pdf
9.1 Utilization for the pressing of short flax
10 FR_0505_V2.pdf
10.1 Utilization for the pressing of linen
11 FR_0504_V2.pdf
11.1 Before use
12 FR_0503_V2.pdf
12.1 Principle and function
13 FR_0502_V2.pdf
13.1 Introduction
14 FR_0500.pdf
14.1 Instructions for use
15 FR_0404_V2.pdf
15.1 Preparation of the kit very short linen
16 FR_0402_V2.pdf
16.1 Lot of parts (0844 809.0)
17 FR_0401_V2.pdf
17.1 Introduction
18 FR_0400.pdf
18.1 Notice of assembly
18.2 Very short linen kit
19 FR_0210_V2.pdf
19.1 Electric
20 FR_0209_V2.pdf
20.1 Twine guides and knifee kit lin
24 FR_0205_V2.pdf
24.1 Preparation of the pick-up
25 FR_0204_V2.pdf
25.1 Reduction of the name of the courses
26 FR_0202_V2.pdf
26.1 Lot of parts (0844 801.0)
27 FR_0201_V2.pdf
27.1 Introduction
28 FR_0509_V2.pdf
28.1 Maintenance
29 RU_0100.pdf
29.1 _V2.pdf
41.1 (0844 809.0)
42 RU_0401_V2.pdf
42.1 ???????? ????????????
56 RU_0509_V2.pdf
56.1 ??????????? ????????????
57 FR_0201_V2.pdf
57.1 Introduction
58 FR_0202_V2.pdf
58.1 Lot of parts (0844 801.0)
59 FR_0204_V2.pdf
59.1 Reduction of the name of the courses
60 FR_0205_V2.pdf
60.1 Preparation of the pick-up
61 FR_0206_V2.pdf
61.1 Preassembly of the kit lin
62 FR_0207_V2.pdf
62.1 Assembly of kit lin
63 FR_0208_V2.pdf
63.1 Preparation of the kit _x001C_Lin court_x001D_
64 FR_0209_V2.pdf
64.1 Twine guides and knife
65 FR_0210_V2.pdf
65.1 Electric
66 FR_0400.pdf
66.1 Notice of assembly
66.2 Very short linen kit
67 FR_0400.pdf
67.1 Notice of assembly
67.2 Very short linen kit
68 FR_0401_V2.pdf
68.1 Introduction
69 FR_0402_V2.pdf
69.1 Lot of parts (0844 809.0)
70 FR_0404_V2.pdf
70.1 Preparation of the kit _x001C_very short linen_x001D_
71 FR_0500.pdf
71.1 Instructions for use
72 FR_0502_V2.pdf
72.1 Introduction
73 FR_0503_V2.pdf
73.1 Principle and function
74 FR_0504_V2.pdf
74.1 Before use
75 FR_0505_V2.pdf
75.1 Utilization for the pressing of linen
76 FR_0506_V2.pdf
76.1 Utilization for the pressing of short flax
77 FR_0507_V2.pdf
77.1 Utilization for the pressing of very short flax
78 FR_0508_V2.pdf
78.1 Utilization of the press for other products
79 FR_0509_V2.pdf
79.1 Maintenance
80 RU_0100.pdf
80.1 V2.pdf
5.13 3.13 Lubricating oil system
5.14 3.14 Lubrication system
5.15 3.15 Brake
5.16 3.16 Equipment
6 4 Control and display elements
6.1 4.1 OPERATOR
6.2 4.2 COMMUNICATOR II
6.3 4.3 ISOBUS Terminal
7 5 Technical data
7.1 5.1 Press
7.2 5.2 Safety devices
7.3 5.3 Tractor
8 6 Prepare machine
8.1 6.1 General information
8.2 6.2 Drive shaft
8.3 6.3 Attachment bracket
8.4 6.4 Hydraulic connections
8.5 6.5 Electrical connections
8.6 6.6 Brake
8.7 6.7 Yarn binding
8.8 6.8 Net binding
8.9 6.9 Cutting device
8.10 6.10 Load machine
9 7 Operation
9.1 7.1 General information
9.2 7.2 Movement of the press
9.3 7.3 Before each use
9.4 7.4 Field operation
9.5 7.5 Specific use
9.6 7.6 Pick-up
9.7 7.7 Feeding unit
9.8 7.8 Binding
9.9 7.9 Bale parameters
9.10 7.10 OPERATOR
9.11 7.11 COMMUNICATOR II
9.12 7.12 ISOBUS Terminal
9.13 7.13 Unclogging the press
9.14 7.14 After use
10 8 Malfunction and remedy
10.1 8.1 General information
10.2 8.2 Hydraulics
10.3 8.3 COMMUNICATOR II
10.4 8.4 Binding
10.5 8.5 Lubricating oil system
10.6 8.6 Lubrication system
10.7 8.7 Other functions
11 9 Maintenance
11.1 9.1 General maintenance instructions
11.2 9.2 Maintenance tables
11.3 9.3 Lubricant tables
11.4 9.4 Lubrication plan
11.5 9.5 Maintenance work gearbox
11.6 9.6 Maintenance work axle and wheels
11.7 9.7 Maintenance work brake
11.8 9.8 Maintenance work trailer hitch
11.9 9.9 Maintenance work hydraulic system
11.10 9.10 Maintenance work Pickup
11.11 9.11 Maintenance work on the pull-in unit
11.12 9.12 Maintenance work press chamber
11.13 9.13 Maintenance work Binding
11.14 9.14 Maintenance work base storage
11.15 9.15 Maintenance work lubricating oil system
11.16 9.16 Maintenance work lubrication system
11.17 9.17 Maintenance work machine housing
11.18 9.18 Winterization
12 10 Decommissioning and disposal
12.1 10.1 General information
13 11 EC declaration of conformity
13.1 11.1 General information

00 0301 385 7.pdf

Table of Content:
1 VARIANT 485 ROTO CUTVARIANT 480 / 480 ROTO CUTVARIANT 465 ROTO CUTVARIANT 460 / 460 ROTO CUT
2 Table of Contents
3 1 Introduction
3.1 1.1 General information
3.2 1.2 Intended use
4 2 Security
4.1 2.1 Recognize warnings
4.2 2.2 Safety instructions
4.3 2.3 Warning symbol
5 3 Machine description
5.1 3.1 Existing models
5.2 3.2 Overview and functions
5.3 3.3 Safety device
5.4 3.4 Work and service areas
5.5 3.5 Type plate and serial number
5.6 3.6 General functional principle
5.7 3.7 Information on the machine
5.8 3.8 Operating terminal
5.9 3.9 PTO shaft and drive
5.10 3.10 Hitch bracket
5.11 3.11 Receipt
5.12 3.12 Feeding unit
5.13 3.13 Pressing device
5.14 3.14 Binding system
5.15 3.15 Bale placement
5.16 3.16 Lubricating oil system
5.17 3.17 Lubrication system
5.18 3.18 Brake
5.19 3.19 Hydraulics
5.20 3.20 Equipment
6 4 Control and display elements
6.1 4.1 COMMUNICATOR II
6.2 4.2 OPERATOR
6.3 4.3 ISOBUS Terminal
6.4 4.4 EASY on board
7 5 Technical data
7.1 5.1 Press
7.2 5.2 Safety devices
7.3 5.3 Operating materials
7.4 5.4 Tractor
8 6 Prepare machine
8.1 6.1 Switch off and secure the machine
8.2 6.2 Adjust tractor
8.3 6.3 Adjust machine
8.4 6.4 Attach machine
8.5 6.5 Preparing for work
8.6 6.6 Yarn binding
8.7 6.7 Net binding
8.8 6.8 Cutting device
8.9 6.9 Loading the machine
9 7 Operation
9.1 7.1 General information
9.2 7.2 Movement of the press
9.3 7.3 Before each use
9.4 7.4 Field operation
9.5 7.5 Specific use
9.6 7.6 Pick-up
9.7 7.7 Feeding unit
9.8 7.8 Binding
9.9 7.9 Bale parameters
9.10 7.10 OPERATOR
9.11 7.11 OPERATOR with simplified menu
9.12 7.12 COMMUNICATOR II
9.13 7.13 ISOBUS Terminal
9.14 7.14 EASY on board
9.15 7.15 Unclogging the press
9.16 7.16 After Use
9.17 7.17 Detach machine
10 8 Malfunction and remedy
10.1 8.1 General information
10.2 8.2 Hydraulics
10.3 8.3 COMMUNICATOR II
10.4 8.4 Binding
10.5 8.5 Lubricating oil system
10.6 8.6 Lubrication system
10.7 8.7 Other functions
11 9 Maintenance
11.1 9.1 General maintenance instructions
11.2 9.2 Maintenance tables
11.3 9.3 Lubrication plan
11.4 9.4 Maintenance work gearbox
11.5 9.5 Maintenance work axle and wheels
11.6 9.6 Maintenance work brake
11.7 9.7 Maintenance work trailer hitch
11.8 9.8 Maintenance work hydraulic system
11.9 9.9 Maintenance work Pickup
11.10 9.10 Maintenance work on the pull-in unit
11.11 9.11 Maintenance work press chamber
11.12 9.12 Maintenance work Binding
11.13 9.13 Maintenance work base storage
11.14 9.14 Maintenance work lubricating oil system
11.15 9.15 Maintenance work lubrication system
11.16 9.16 Maintenance work machine housing
11.17 9.17 Winterization
12 10 Decommissioning and disposal
12.1 10.1 General information
13 11 EC declaration of conformity
13.1 11.1 General information