Claas Volto 700 (G52) Tedders Operator Manual ES

File List:

00 0297 098 2.pdf

00 0297 098 2.pdf:

1. Introduction
1.1 Information regarding the instruction manual
1.1.1 Validity of the manual
1.1.2 Information about this instruction manual
1.1.3 Symbols and indications
1.1.4 Optional equipment
1.1.5 Qualified specialized workshop
1.1.6 Information regarding warranty
1.1.7 Spare parts and technical issues
1.2 Proper application of the machine
1.2.1 Proper machine application
1.2.2 Logically foreseeable inappropriate application
2 Security
2.1 Recognize warning signs
2.1.1 Danger symbols
2.1.2 Keyword
2.2 Safety instructions
2.2.1 Meaning of the instruction manual
2.2.2 Observe graphic danger symbols and alarm indications
2.2.3 Requirements for all people working with the machine
2.2.4 Children in danger
2.2.5 Danger zones
2.2.6 Position yourself between the tractor and the machine
2.2.7 Accompanying persons
2.2.8 Couple the tractor with the machine
2.2.9 Risk of injury due to rotating shafts
2.2.10 Construction modifications
2.2.11 Optional equipment and spare parts
2.2.12 Control of the machine in operation
2.2.13 Use only after correct start-up
2.2.14 Technical status
2.2.15 Danger due to machine breakdowns
2.2.16 Comply with technical limit values
2.2.17 Danger due to coasting parts
2.2.18 Maintain functional protection devices
2.2.19 Personal protective equipment
2.2.20 Wear appropriate clothing
2.2.21 Remove dirt and loose objects
2.2.22 Prepare the machine for road traffic
2.2.23 Dangers when driving on the road and in the countryside
2.2.24 Park the machine safely
2.2.25 Parking without supervision
2.2.26 Unsuitable consumables
2.2.27 Safe handling of consumables and auxiliary materials
2.2.28 Environmental protection and waste disposal
2.2.29 Fire protection
2.2.30 Deadly electrical discharge through overhead lines
2.2.31 Liquids under pressure
2.2.32 Hot surfaces
2.2.33 Work only on the stopped machine
2.2.34 Maintenance work and repair work
2.2.35 Machine parts and lifted loads
2.2.36 Danger from welding work
2.3 Safety instructions on the machine
2.3.1 Warning symbols
2.3.2 Position of graphic warning symbols
3 Machine Description
3.1 Summary and operation
3.1.1 Summary VOLTO 700
3.1.2 VOLTO 700 operating mode
3.2 Optional equipment
3.2.1 Union fork kit*
3.2.2 Hydraulic connection parts 1 piece*
3.2.3 Anti-loss safety for tines ø 9.5 mm*
3.2.4 Anti-loss safety for tines ø 10.5 mm*
3.2.5 Mechanical limiting canvas*
3.2.6 Hydraulic limiting canvas*
3.2.7 Feeler wheel*
3.2.8 Spare wheel 16×6.5-8*
3.2.9 Gear for making rows at night*
3.2.10 Legal equipment France*
3.2.11 Anti-winding plates*
3.2.12 Drainers*
3.3 Identification plates and vehicle identification number
3.3.1 Machine identification plate
3.4 Machine information 3.4.1 Adhesives
4 Control and display instruments
4.1 Control elements
4.1.1 Support legs
4.1.2 Feeler wheel*
5 Technical data
5.1 VOLT 700
5.1.1 Measurements
5.1.2 Weights
5.1.3 Requirements for the tractor
5.1.4 Acoustic intensity level
5.1.5 Version
5.1.6 Tire measurements
5.1.7 Tire pressure
5.1.8 Lubricants
6 Preparation of the machine
6.1 Adapt the tractor
6.1.1 Check the tractor ballast
Calculate the minimum front ballast
Calculate the minimum rear ballast
Calculate the actual load on the front axle
Calculate the actual total weight
Calculate the actual load on the rear axle
Calculation table
6.2 Turn off the machine and secure it
6.2.1 Shut down and secure the machine and tractor
6.2.2 Secure the lifted machine
6.3 Adapt the machine
6.3.1 Cardan shaft – check the length
6.3.2 Adapt the length of the cardan shaft
6.3.3 Assemble the cardan shaft to the machine
6.4 Hooking up the machine
6.4.1 Attach the lower drawbar
6.4.2 Attach the third point arm
When using the feeler wheel*
6.4.3 Assemble the cardan shaft
6.4.4 Turn the support legs upwards
6.4.5 Attach the hydraulic hose
6.4.6 Attach the hydraulic hose for the limitation canvas*
6.4.7 Plug in the lighting cable
6.4.8 Save shims*
6.5 Unhooking the machine
6.5.1 Turn the support legs downwards
6.5.2 Position the shims*
6.5.3 Remove the lighting cable
6.5.4 Disconnect the hydraulic hose
6.5.5 Detach the hydraulic hose for the limitation canvas*
6.5.6 Dismantle the cardan shaft
6.5.7 Unhook the three-point support
6.6 Prepare for road traffic
6.6.1 General security measures
6.6.2 Latching the transport position
6.7 Load the machine
6.7.1 Lift the machine
7 Management
7.1 General security measures
7.1.1 Take into account before handling
7.2 Driving on the road
7.2.1 Driving on public roads
7.3 Settings for use at work
7.3.1 Take into account when carrying out adjustment work
7.3.2 Adjust the spreading angle
7.3.3 Adjust the spreading angle 16°
7.3.4 Adjust the spreading angle 12°
7.3.5 Adjust the tines
7.3.6 Adjust spreading
7.3.7 Adjust the working height
7.3.8 Adjusting the working height with feeler wheel*
7.3.9 Adjust the limiting canvas*
7.3.10 Eliminate winding problems
7.4 Use at work
7.4.1 Take into account during the field trip
7.4.2 Fold in transport position
Release lock
7.4.3 Fold in working position
Unlocking the transport position
7.4.4 Using the machine
7.4.5 Spread
7.4.6 Flipped
7.4.7 Row spreading
7.4.8 Night windrowing
7.4.9 Row turning
7.4.10 Turning with limiting canvas*
7.4.11 In tight curves and when moving in reverse, raise the machine
8 Incident and solution
8.1 Incident summary
8.1.1 Incidents on the machine
9 Maintenance
9.1 Maintenance instructions
9.1.1 General warning instructions
9.1.2 Electrical installation 1.3 Protection devices
9.1.4 Spare parts
9.1.5 Imbalance
9.1.6 Pressurized air and water
9.1.7 Wheels
9.1.8 Prevention against burns
9.1.9 Oil
9.1.10 Fire and explosion prevention
9.1.11 Pipes, tubes and hoses
9.2 Summary of maintenance intervals
9.2.1 Behavior with maintenance intervals
9.2.2 Before starting the harvest
9.2.3 After the first 10 hours of service
9.2.4 Every 50 hours of service
9.2.5 Every 100 hours of service
9.2.6 Every 500 hours of service or annually
9.2.7 Every 5 years
9.2.8 In case of need
9.2.9 After harvest
9.3 General maintenance work
9.3.1 Clean the machine
9.3.2 Maintain the machine
9.3.3 Check the fixing material
9.4 Gearbox
9.4.1 Check the tightness of the gear
9.4.2 Change main gear lubricant
9.4.3 Change the rotor gear lubricant
9.4.4 Check the gear oil level for night rowing*
9.4.5 Change night swath gear oil*
9.5 Clutch
9.5.1 Check the overload clutch
9.6 Cardan shaft
9.6.1 Maintenance of cardan shafts
9.7 Chassis
9.7.1 Check tire pressure
9.7.2 Change the rotor chassis wheel
9.7.3 Change the feeler wheel*
9.7.4 Retighten the wheel nuts on the rotor chassis
9.7.5 Check the wheel nut on the feeler wheel*
9.8 Drives
9.8.1 Grease PERMALINK finger couplings
9.9 Hydraulic installation
9.9.1 Carry out maintenance on the hydraulic installation
9.9.2 Check the hydraulic hoses
9.9.3 Check the pressure accumulator*
9.9.4 Check the hydraulic cylinders
9.10 Electrical and electronic system
9.10.1 Faulty lighting
9.11 Framework
9.11.1 Check the chassis bolted joints
Screwed joints of the longitudinal support of the rotor arm
Bolted joints of the rotor arms
9.12 Pick holder
9.12.1 Check the tines
9.13 Greasing scheme
9.13.1 Grease the lubrication points every 50 hours of service
9.13.2 Grease the lubrication points every 100 hours of service
10 Decommissioning and waste disposal
10.1 General information
10.1.1 Decommissioning and waste disposal
11 EC declaration of conformity
11.1 VOLT 700
11.1.1 EC declaration of conformity
12 Technical dictionary and abbreviations
12.1 Terms and explanations
12.1.1 Technicalities
12.1.2 Abbreviations