Claas XERION 3800-3300 (781) Tractors Operator Manual PL

File List:

– 00 0290 431 1.pdf
– 00 0291 143 0.pdf
– 00 0291 759 1.pdf
– 00 0292 787 0.pdf
– 00 0294 130 1.pdf
– 00 0295 743 0.pdf
– 00 0296 427 0.pdf

00 0290 431 1.pdf

Table of Content:
1 1 Introduction
1.1 1.1 General instructions
1.2 1.2 Traffic
1.3 1.3 Nameplates and identification numbers
1.4 1.4 Attached parts / machine housing
2 2 Security
2.1 2.1 Safety instructions
2.2 2.2 Safety units on vehicle
2.3 2.3 Warning Symbols
3 3 Technical data
3.1 3.1 Regulations of the country of use
3.2 3.2 Dimensions and weights
3.3 3.3 Engine
3.4 3.4 Diagonal position
3.5 3.5 Drive
3.6 3.6 Brakes / pneumatic system
3.7 3.7 Steering
3.8 3.8 Lifts
3.9 3.9 Trailer hooks
3.10 3.10 Receive drive
3.11 3.11 Hydraulic installation
3.12 3.12 Electrics
3.13 3.13 Cab / Driver’s platform
3.14 3.14 Tightening torques
4 4 Before first run
4.1 4.1 Checklist for first run
5 5 Before each start
5.1 5.1 Mirrors
5.2 5.2 Steering limiters
5.3 5.3 Fenders
5.4 5.4 Masses
6 6 Overview of controls
6.1 6.1 Cabin
6.2 6.2 Automatic air conditioning
6.3 6.3 Steering column
6.4 6.4 Adjusting the driver’s seat
6.5 6.5 Lifts
6.6 6.6 Sockets
7 7 Driving and transport
7.1 7.1 Starting the engine
7.2 7.2 Lighting and warning signs
7.3 7.3 Selecting the gear operating mode
7.4 7.4 Starting from a standstill
7.5 7.5 Driving
7.6 7.6 Cruise
7.7 7.7 Setting the engine speed
7.8 7.8 Differential locks
7.9 7.9 Brakes
7.10 7.10 Parking vehicle
8 8 Setting the working position
8.1 8.1 Cab positions
8.2 8.2 Front linkage
8.3 8.3 Rear linkage
8.4 8.4 Trailer hooks
8.5 8.5 Top-mounted machines
8.6 8.6 PTO shafts and PTO shafts
8.7 8.7 Hydraulic connections
8.8 8.8 Trailer brake connections
8.9 8.9 Installation of electrical and electronic devices
9 9 Operation CEBIS
9.1 9.1 Function and structure
9.2 9.2 Controls and displays
9.3 9.3 Operation CEBIS
9.4 9.4 Menu structure
10 10 Operation CLAAS COMMUNICATOR
10.1 10.1 Power hydraulics
10.2 10.2 Service menu
11 11 Work
11.1 11.1 Headlights
11.2 11.2 Steering system
11.3 11.3 Trailer brake
11.4 11.4 PTO / Bypass drive
11.5 11.5 Lifts
11.6 11.6 Mounted/mounted machines, hydraulically driven
11.7 11.7 CLAAS SEQUENCE MANAGEMENT
11.8 11.8 Switchable fan
11.9 11.9 Central lubrication system
11.10 11.10 Tire air pressure – regulation system
12 12 Faults and their removal
12.1 12.1 Electrics
12.2 12.2 Air conditioning
12.3 12.3 Comfort armchair
12.4 12.4 Central lubrication system
13 13 Maintenance
13.1 13.1 Important maintenance information
13.2 13.2 Maintenance table
13.3 13.3 Lubricant tables
13.4 13.4 Hydraulic installation
13.5 13.5 Gears
13.6 13.6 Compressed air installation / brakes
13.7 13.7 Axes
13.8 13.8 Air conditioning
13.9 13.9 Cabin
13.10 13.10 Trailer hooks
13.11 13.11 Central lubrication system
14 14 Engine Maintenance
14.1 14.1 Important maintenance information
14.2 14.2 Maintenance table
14.3 14.3 Lubricant table
14.4 14.4 Opening the bonnet
14.5 14.5 Engine components
14.6 14.6 Fuel installation
14.7 14.7 Engine oil
14.8 14.8 Cooling system
14.9 14.9 Air intake
14.10 14.10 V-belt / valves
14/11 14/11 Electrics
15 15 Lubrication plan
15.1 15.1 Lubricants and tips
15.2 15.2 Lubrication intervals
15.3 15.3 Lubrication points

00 0291 143 0.pdf

Table of Content:
1 1 Introduction
1.1 1.1 General instructions
2 2 Operation CEBIS
2.1 2.1 Function and structure
2.2 2.2 Controls and displays
2.3 2.3 Operation CEBIS
2.4 2.4 Menu Structure
3.1 3.1 CLAAS SEQUENCE MANAGEMENT

00 0291 759 1.pdf

Table of Content:
1 XERION 3800 TRAC VC
2 XERION 3800 TRAC
3 XERION 3800 SADDLE TRAC
4 XERION 3300 TRAC VC
5 XERION 3300 TRAC
6 Table of contents
7 1 To this user manual
7.1 1.1 General instructions
8 2 Security
8.1 2.1 Safety instructions
8.2 2.2 Safety marking on the machine
9 3 Machine description
9.1 3.1 Overview and operation
9.2 3.2 Safety devices
9.3 3.3 Nameplates and identification number
9.4 3.4 Machine Information
10 4 Display and operating elements
10.1 4.1 Cab / Driver’s platform
10.2 4.2 External control panel
10.3 4.3 Lighting
10.4 4.4 Sockets
10.5 4.5 On-board computer CEBIS
10.6 4.6 CEBIS MOBILE on-board computer
11 5 Technical data
11.1 5.1 XERION
12 6 Preparing the machine
12.1 6.1 Machine shutdown and protection
12.2 6.2 Entering work and maintenance areas
12.3 6.3 Before starting
12.4 6.4 Gears
12.5 6.5 Vehicle
12.6 6.6 Rear linkage
12.7 6.7 Front linkage
12.8 6.8 Trailer hitch
12.9 6.9 PTO / Bypass drive
12.10 6.10 Plumbing
12.11 6.11 Cabin / Driver’s platform
12/12 6/12 Fenders
12.13 6.13 Ballast / additional load
13 7 Service
13.1 7.1 Driving and transport
13.2 7.2 On-board computer CEBIS
13.3 7.3 CEBIS MOBILE on-board computer
13.4 7.4 On-board computer CLAAS COMMUNICATOR
13.5 7.5 CLAAS SEQUENCE MANAGEMENT
13.6 7.6 Rear linkage
13.7 7.7 Front linkage
13.8 7.8 Tilting lift
13.9 7.9 Trailer hitch
13.10 7.10 Steering
13.11 7.11 PTO / Bypass drive
13/12 7/12 Plumbing
13.13 7.13 Power hydraulics
13.14 7.14 Cabin / Driver’s platform
14 8 Faults and their removal
14.1 8.1 Engine
14.2 8.2 Transmission / Clutch / PTO shaft
14.3 8.3 Brakes
14.4 8.4 Electrics / electronics
14.5 8.5 Cab / Driver’s platform
14.6 8.6 Central lubrication
15 9 Maintenance
15.1 9.1 General maintenance recommendations
15.2 9.2 Maintenance intervals
15.3 9.3 Lubrication plan
15.4 9.4 Injection system / fuel system
15.5 9.5 Lubrication system
15.6 9.6 Cooling system
15.7 9.7 Air intake
15.8 9.8 Transmission / Clutch / PTO shaft
15.9 9.9 Vehicle
15/10 9/10 Brakes
15/11 9/11 Trailer hitch
15/12 9/12 Drives
15/13 9/13 Plumbing
15.14 9.14 Electrics / electronics
15.15 9.15 Cabin / Driver’s platform
15.16 9.16 Attached parts, machine housing
15.17 9.17 Central lubrication
16 10 Decommissioning and disposal
16.1 10.1 General information
17 11 Professional words and abbreviations
17.1 11.1 Shortcuts

00 0292 787 0.pdf

Table of Content:
1 XERION 3800 TRAC VCXERION 3800 TRACXERION 3800 SADDLE TRACXERION 3300 TRAC VCXERION 3300 TRAC
2 Table of contents
3 Introduction
3.1 General instructions
4 Technical data
4.1 XERION
5 Preparing the machine
6.1 Driving and transport
7 Maintenance
7.1 General maintenance recommendations
7.2 Maintenance intervals
7.3 Lubrication plan
7.4 Attached parts, machine housing

00 0294 130 1.pdf

Table of Content:
1 1 Introduction
1.1 1.1 General instructions
1.2 1.2 Traffic
1.3 1.3 Nameplates and identification numbers
2 2 Security
2.1 2.1 Safety instructions
2.2 2.2 Safety units on vehicle
2.3 2.3 Warning Symbols
3 3 Technical data
3.1 3.1 Regulations of the country of use
3.2 3.2 Dimensions and weights
3.3 3.3 Engine
3.4 3.4 Diagonal position
3.5 3.5 Drive
3.6 3.6 Brakes / pneumatic system
3.7 3.7 Steering
3.8 3.8 Lifts
3.9 3.9 Trailer hooks
3.10 3.10 Receive drive
3.11 3.11 Hydraulic installation
3.12 3.12 Electrics
3.13 3.13 Tightening torques
4 4 Before first run
4.1 4.1 Checklist for first run
5 5 Bring limiters
5.3 5.3 Fenders
5.4 5.4 Masses
6 6 Overview of controls
6.1 6.1 Cabin
6.2 6.2 Automatic air conditioning
6.3 6.3 Steering column
6.4 6.4 Adjusting the driver’s seat
6.5 6.5 Lifts
6.6 6.6 Sockets
7 7 Driving and transport
7.1 7.1 Starting the engine
7.2 7.2 Lighting and warning signs
7.3 7.3 Selecting the gear operating mode
7.4 7.4 Starting from a standstill
7.5 7.5 Driving
7.6 7.6 Cruise
7.7 7.7 Setting the engine speed
7.8 7.8 Differential locks
7.9 7.9 Brakes
7.10 7.10 Parking vehicle
8 8 Setting the working position
8.1 8.1 Cab positions
8.2 8.2 Front linkage
8.3 8.3 Rear linkage
8.4 8.4 Trailer hooks
8.5 8.5 Top-mounted machines
8.6 8.6 PTO shafts and PTO shafts
8.7 8.7 Hydraulic connections
8.8 8.8 Trailer brake connections
8.9 8.9 Installation of electrical and electronic devices
9 9 Operation CEBIS
9.1 9.1 Function and structure
9.2 9.2 Controls and displays
9.3 9.3 Operation CEBIS
9.4 9.4 Menu structure
10 10 Operation CLAAS COMMUNICATOR
10.1 10.1 Power hydraulics
10.2 10.2 Service menu
11 11 Work
11.1 11.1 Headlights
11.2 11.2 Steering system
11.3 11.3 Trailer brake
11.4 11.4 PTO / Bypass drive
11.5 11.5 Lifts
11.6 11.6 Mounted/mounted machines, hydraulically driven
11.7 11.7 CLAAS SEQUENCE MANAGEMENT
11.8 11.8 Switchable fan
11.9 11.9 Central lubrication system
11.10 11.10 Tire air pressure – regulation system
12 12 Faults and their removal
12.1 12.1 Electrics
12.2 12.2 Air conditioning
12.3 12.3 Central lubrication system
13 13 Maintenance
13.1 13.1 Important maintenance information
13.2 13.2 Maintenance tables
13.3 13.3 Lubricant tables
13.4 13.4 Hydraulic installation
13.5 13.5 Gears
13.6 13.6 Compressed air installation / brakes
13.7 13.7 Axes
13.8 13.8 Air conditioning
13.9 13.9 Cabin
13.10 13.10 Trailer hooks
13.11 13.11 Central lubrication system
14 14 Engine Maintenance
14.1 14.1 Important maintenance information
14.2 14.2 Maintenance table
14.3 14.3 Lubricant table
14.4 14.4 Opening the bonnet
14.5 14.5 Engine components
14.6 14.6 Fuel installation
14.7 14.7 Engine oil
14.8 14.8 Cooling system
14.9 14.9 Air intake
14.10 14.10 V-belt / valves
14/11 14/11 Electrics
15 15 Lubrication plan
15.1 15.1 Lubricants and tips
15.2 15.2 Lubrication intervals
15.3 15.3 Lubrication points

00 0295 743 0.pdf

Table of Content:
6.1 1.1 Veobecn pokyny
7 2 Ovldn CEBIS
7.1 2.1 Menu structure
8 3 Pracovnii generale
13 2 Utilizare CEBIS
13.1 2.1 Structura meniului
14 3 Exploatarea n lucru
14.1 3.1 Direc ie
14.2 3.2 Priza de putere / antrenarea auxiliar
14.3 3.3 CLAAS SEQUENCE MANAGEMENT
15.1 1.1 ?BIS
4.3 2.3 Swivel rear lift
5 3 Faults and their removal
5.1 3.1 Lifting device