komatsu hd325 6 dump truck operation and maintenance manual seamw00500 1

komatsu hd325 6 dump truck operation and maintenance manual seamw00500 2

komatsu hd325 6 dump truck operation and maintenance manual seamw00500 3

komatsu hd325 6 dump truck operation and maintenance manual seamw00500 4

komatsu hd325 6 dump truck operation and maintenance manual seamw00500 5

Komatsu HD325-6 Dump Truck Operation and Maintenance Manual SEAMW00500

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: SEAMW00500
Format: PDF
Size: 34.8MB
Number of Pages: 287

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- HD325-6 Dump Truck

1. MAIN MENU
2. COVER
3. FOREWORD
4. SAFETY INFORMATION
5. INTRODUCTION
5.1. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
5.2. BREAKING IN THE MACHINE
6. LOCATION OF PLATES, TABLE TO ENTER SERIAL NUMBER AND DISTRIBUTOR
6.1. MACHINE SERIAL NO. PLATE POSITION
6.2. ENGINE SERIAL NO. PLATE POSITION
6.3. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
7. CONTENTS
8. SAFETY
8.1. GENERAL PRECAUTIONS
8.2. PRECAUTIONS DURING OPERATION
8.2.1. BEFORE STARTING ENGINE
8.2.2. AFTER STARTING ENGINE
8.2.3. SHIPPING
8.2.4. BATTERY
8.2.5. TOWING
8.3. PRECAUTIONS FOR MAINTENANCE
8.3.1. BEFORE CARRYING OUT MAINTENANCE
8.3.2. DURING MAINTENANCE
8.3.3. TIRES
8.4. POSITION FOR ATTACHING SAFETY LABELS
8.4.1. POSITION FOR ATTACHING SAFETY LABELS
9. OPERATION
9.1. GENERAL VIEW
9.1.1. GENERAL VIEW OF MACHINE
9.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
9.2. EXPLANATION OF COMPONENTS
9.2.1. MACHINE MONITOR
9.2.2. SWITCHES
9.2.3. CONTROL LEVERS AND PEDALS
9.2.4. MECHATRONICS EQUIPMENT CONTROLLER
9.2.5. SAFETY PIN
9.2.6. DUST INDICATOR
9.2.7. FUSES
9.2.8. LOCATION OF MANUAL BOX
9.2.9. CAR RADIO
9.2.10. CAR STEREO
9.2.11. AIR CONDITIONER
9.2.12. CAR HEATER
9.3. OPERATION
9.3.1. CHECK BEFORE STARTING ENGINE
9.3.2. STARTING ENGINE
9.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
9.3.4. MOVING MACHINE OFF
9.3.5. SHIFTING GEAR
9.3.6. TRAVELING DOWNHILL
9.3.7. TRAVELING IN REVERSE
9.3.8. STEEERING THE MACHINE
9.3.9. STOPPING THE MACHINE
9.3.10. OPERATING DUMP BODY
9.3.11. PRECAUTIONS FOR OPERATIONS
9.3.12. PARKING MACHINE
9.3.13. CHECKS AFTER COMPLETION OF WORK
9.3.14. STOPPING ENGINE
9.3.15. CHECKS AFTER STOPPING ENGINE
9.3.16. LOCKING
9.3.17. HANDLING TIRES
9.4. DETERMINING AND MAINTAINING TRAVEL ROAD
9.4.1. DETERMINING TRAVEL ROAD
9.4.2. MAINTAINING TRAVEL ROAD
9.5. COLD WEATHER OPERATION
9.5.1. PRECAUTIONS FOR LOW TEMPERATURE
9.5.2. PRECAUITIONS AFETR COMPLETION OF WORK
9.5.3. AFTER COLD WEATHER
9.6. LONGTERM STORAGE
9.6.1. BEFORE STORAGE
9.6.2. DURING STORAGE
9.6.3. AFTER STORAGE
9.6.4. PRECAUTIONS BEFORE TRAVELING AFTER LONGTERM STORAGE
9.7. TROUBLESHOOTING
9.7.1. AFTER RUNNING OUT OF FUEL
9.7.2. TOWING MACHINE
9.7.3. IF BATTERY IS DISCHARGED
9.7.4. OTHER TROUBLE
10. MAINTENANCE
10.1. GUIDES TO MAINTENANCE
10.2. OUTLINE OF SERVICE
10.2.1. OUTLINE OF OIL, FUEL, COOLANT
10.2.2. OUTLINE OF ELECTRIC SYSTEM
10.3. WEAR PARTS LIST
10.4. USE OF FUEL, COOLANT, AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
10.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
10.5.1. INTRODUCTION OF NECESSARY TOOLS
10.5.2. TORQUE LIST
10.6. PERIODIC REPLACEMENT OF SAFETY CRTICAL PARTS
10.7. MAINTENANCE SCHEDULE CHART
10.8. SERVICE PROCEDURE
10.8.1. INITIAL 250 HOURS SERVICE
10.8.2. WHEN REQUIRED
10.8.3. CHECK BEFORE STARTING
10.8.4. EVERY 50 HOURS SERVICE
10.8.5. EVERY 250 HOURS OF SERVICE
10.8.6. EVERY 500 HOURS OF SERVICE
10.8.7. EVERY 1000 HOURS OF SERVICE
10.8.8. EVERY 2000 HOURS OF SERVICE
10.8.9. EVERY 4000 HOURS OF SERVICE
10.8.10. EVERY 3 YEARS OF SERVICE
11. SPECIFICATIONS
11.1. SPECIFICATIONS
12. OPTIONS, ATTACHMENTS
12.1. HANDLING PAYLOAD METER
12.1.1. NAME OF PARTS
12.1.2. EXTERNAL DISPLAY LAMPS
12.1.3. OPERATING PAYLOAD METER
12.2. SELECTING DUMP BODY
12.3. OPTIONS AND ATTACHMENTS
12.4. TACHOGRAPH (TCO156)
12.4.1. EXPLANATION OF COMPONENTS
12.4.2. METHOD OF USING KEY
12.4.3. METHOD OF USE
12.5. REVO TACHOGRAPH (TCO156)
12.5.1. EXPLANATION OF COMPONENTS
12.5.2. METHOD OF USE
12.6. USING DIFFERENTIAL LOCK
12.6.1. DIFFERENTIAL LOCK PEDAL
12.6.2. PRECAUTIONS AND METHOD OF USE
12.7. HANDLING AUTOGREASING SYSTEM
12.7.1. METHOD OF OPERATING AUTOGREASING SYSTEM
12.7.2. PRECAUTIONS WHEN HANDLING AUTOGREASING SYSTEM
12.7.3. TROUBLESHOOTING
12.7.4. SPECIFICATIONS
13. HIGH ALTITUDE SPECIFICATIONS
13.1. EXPLANATIONS OF COMPONENTS
13.1.1. MACHINE MONITOR
13.1.2. HYDRAULIC TANK PRESSURIZING DEVICE
13.2. OPERATION
13.2.1. HANDLING TIRES
13.3. SERVICE PROCEDURE
13.3.1. CHECK BEFORE STARTING
13.3.2. EVERY 500 HOURS SERVICE
13.3.3. EVERY 2000 HOURS SERVICE

Rate this product