komatsu hd465 7 hd605 7 dump truck operation and maintenance manual ten00271 03 1

komatsu hd465 7 hd605 7 dump truck operation and maintenance manual ten00271 03 2

komatsu hd465 7 hd605 7 dump truck operation and maintenance manual ten00271 03 3

komatsu hd465 7 hd605 7 dump truck operation and maintenance manual ten00271 03 4

komatsu hd465 7 hd605 7 dump truck operation and maintenance manual ten00271 03 5

Komatsu HD465-7, HD605-7 Dump Truck Operation and Maintenance Manual TEN00271-03

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: TEN00271-03
Format: PDF
Size: 7.7MB
Number of Pages: 383

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- HD465-7 Dump Truck
- HD605-7 Dump Truck

1. COVER
2. FOREWORD
2.1. FOREWORD
2.2. SAFETY INFORMATION
2.3. INTENDED USE
2.3.1. DIRECTIONS OF MACHINE
2.4. LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
2.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
2.4.2. ENGINE SERIAL NO. PLATE
2.4.3. SERVICE METER POSITION
2.4.4. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
2.5. CONTENTS
3. SAFETY
3.1. SAFETY
3.2. SAFETY LABELS
3.2.1. POSITION FOR ATTACHING SAFETY LABELS
3.2.2. SAFETY LABELS
3.3. GENERAL PRECAUTIONS
3.4. PRECAUTIONS DURING OPERATION
3.4.1. STARTING ENGINE
3.4.2. OPERATION
3.4.3. TRANSPORTATION
3.4.4. BATTERY
3.4.5. TOWING
3.5. PRECAUTIONS FOR MAINTENANCE
3.6. PRECAUTIONS WITH TIRES
4. OPERAION
4.1. GENERAL VIEW
4.1.1. GENERAL VIEW OF MACHINE
4.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
4.2. EXPLANATION OF COMPONENTS
4.2.1. MACHINE MONITOR
4.2.2. OTHER FUNCTIONS OF MACHINE MONITOR
4.2.3. SWITCHES
4.2.4. CONTROL LEVERS AND PEDALS
4.2.5. MECHATRONICS EQUIPMENT CONTROLLER
4.2.6. AIR CONDITIONER
4.3. OPERATION
4.3.1. CHECK BEFORE STARTING ENGINE
4.3.2. STARTING ENGINE
4.3.3. OPERATIONS, CHECKS AFTER STARTING ENGINE
4.3.4. STOPPING ENGINE
4.3.5. CHECKS AFTER STOPPING ENGINE
4.3.6. MOVING MACHINE OFF (FORWARD, REVERSE), STOPPING
4.3.7. SHIFTING GEAR
4.3.8. TRAVELING DOWNHILL
4.3.9. STEERING THE MACHINE
4.3.10. LOADING OPERATIONS
4.3.11. DUMP OPERATIONS
4.3.12. PRECAUTIONS FOR OPERATION
4.3.13. PARKING MACHINE
4.3.14. CHECKS AFTER COMPLETION OF WORK
4.3.15. LOCKING
4.3.16. HANDLING TIRES
4.4. DETERMINING AND MAINTAINING TRAVEL ROAD
4.4.1. DETERMINING TRAVEL ROAD
4.4.2. MAINTAINING TRAVEL ROAD
4.5. TRANSPORTATION
4.5.1. PRECAUTIONS WHEN TRANSPORTING
4.5.2. STEPS FOR TRANSPORTATION
4.5.3. METHOD OF SECURING MACHINE
4.5.4. IF BATTERY IS DISCHARGED
4.5.5. OTHER TROUBLE
5. MAINTENANCE
5.1. GUIDES TO MAINTENANCE
5.2. OUTLINE OF SERVICE
5.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
5.2.2. OUTLINE OF ELECTRIC SYSTEM
5.3. WEAR PARTS
5.3.1. WEAR PARTS LIST
5.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
5.4.1. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
5.4.2. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
5.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
5.5.1. TORQUE LIST
5.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
5.6.1. SAFETY CRITICAL PARTS
5.7. MAINTENANCE SCHEDULE CHART
5.7.1. MAINTENANCE SCHEDULE CHART
5.8. SERVICE PROCEDURE
5.8.1. INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
5.8.2. INITIAL 2000 HOURS SERVICE (ONLY AFTER THE FIRST 2000 HOURS)
5.8.3. WHEN REQUIRED
5.8.4. CHECK BEFORE STARTING
5.8.5. EVERY 250 HOURS SERVICE
5.8.6. EVERY 500 HOURS SERVICE
5.8.7. EVERY 1000 HOURS SERVICE
5.8.8. EVERY 2000 HOURS SERVICE
5.8.9. EVERY 4000 HOURS SERVICE
5.8.10. EVERY 15000 HOURS SERVICE
6. SPECIFICATIONS
6.1. SPECIFICATIONS
7. ATTACHMENTS, OPTIONS
7.1. SELECTING DUMP BODY
7.2. HANDLING TACHOGRAPH (TCO2090W)
7.2.1. EXPLANATION OF COMPONENTS
7.2.2. METHOD OF USE
7.3. HANDLING AIR SUSPENSION SEAT
7.3.1. SEAT ADJUSTMENT
7.3.2. REMOVAL AND INSTALLATION OF HEADREST
7.4. HANDLING MACHINES EQUIPPED WITH VHMS
7.4.1. VHMS INSTALLED, COMMUNICATIONS TERMINAL NOT INSTALLED
7.4.2. VHMS AND COMMUNICATIONS TERMINAL INSTALLED
7.4.3. PROCEDURE WHEN DOWNLOADING
7.4.4. CHECK BEFORE STARTING
7.5. HANDLING AUTOMATIC SPIN REGULATOR (ASR)
7.5.1. EXPLANATION OF COMPONENTS
7.5.2. ACTUATION OF ASR SYSTEM
7.5.3. PRECAUTIONS WHEN USING
7.5.4. TROUBLESHOOTING
7.5.5. BLEEDING AIR FROM ASR CIRCUIT
7.6. HANDLING PAYLOAD METER (VHMS BUILTIN TYPE)
7.6.1. OUTLINE OF SYSTEM
7.6.2. NORMAL OPERATION DISPLAY
7.6.3. EXTERNAL DISPLAY LAMPS
7.6.4. PERFORMING CALIBRATION
7.6.5. DATA STORED IN PAYLOAD METER
7.6.6. PROCEDURE WHEN DOWNLOADING
7.6.7. MACHINE ID, OPEN ID
7.6.8. PAYLOAD (CYCLE DATA ITEM)
7.6.9. SERVICE FUNCTIONS
7.6.10. OTHERS
7.7. HANDLING PAYLOAD METER II (CARD TYPE)
7.7.1. METHOD OF USING ACCURATELY
7.7.2. GENERAL LOCATIONS
7.7.3. CONTENT OF DISPLAY (CONTROLLER, EXTERNAL DISPLAY LAMPS)
7.7.4. EXTERNAL DISPLAY LAMPS
7.7.5. DETAILS OF DATA STORED IN MEMORY OF PAYLOAD METER
7.7.6. OPERATION OF SWITCHES
7.7.7. PROBLEM AND WARNING DISPLAY (ERROR CODE)
7.7.8. WHEN ERROR CODE F09 IS DISPLAYED (PROCEDURE FOR REPLACING BATTERY)
7.7.9. OPERATION WHEN ERROR CODE F.CAL IS DISPLAYED OR CONTROLLER HAS BEEN REPLACED
7.8. HANDLING BATTERY ISOLATOR
7.9. HANDLING AUTOGREASING SYSTEM
7.9.1. METHOD OF OPERATING AUTOGREASING SYSTEM
7.9.2. PRECAUTIONS WHEN HANDLING AUTOGREASING SYSTEM
7.9.3. TROUBLESHOOTING
7.10. HANDLING ABS
7.10.1. EXPLANATION OF COMPONENTS
7.10.2. ABS SYSTEM CHECK AFTER STARTING ENGINE
7.10.3. OPERATION OF ABS
7.10.4. PRECAUTIONS WHEN USING
7.10.5. TROUBLESHOOTING
7.11. USE OF REAR VIEW MONITOR
7.11.1. NAME AND FUNCTON OF EACH PART OF REAR VIEW MONITOR
7.11.2. SETTING OF REAR VIEW MONITOR
7.11.3. CAUTIONS WHEN USING REAR VIEW MONITOR
7.12. EXTERNAL POWER SOURCE TYPE ELECTRIC HEATER
7.12.1. SOCKET FOR ENGINE HEATER
7.12.2. CONNECTING EXTERNAL POWER SOURCE
7.12.3. RESTARTING ENGINE
7.12.4. HANDLING EXTERNAL POWER SOURCE TYPE ELECTRIC HEATER
8. INDEX

Rate this product