komatsu pw118mr 11 wheeled excavator operation and maintenance manual wenam00131 1

komatsu pw118mr 11 wheeled excavator operation and maintenance manual wenam00131 2

komatsu pw118mr 11 wheeled excavator operation and maintenance manual wenam00131 3

komatsu pw118mr 11 wheeled excavator operation and maintenance manual wenam00131 4

komatsu pw118mr 11 wheeled excavator operation and maintenance manual wenam00131 5

Komatsu PW118MR-11 Wheeled Excavator Operation and Maintenance Manual WENAM00131

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: WENAM00131
Format: PDF
Size: 61.8MB
Number of Pages: 468

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- PW118MR-11 Wheeled Excavator

1. FOREWORD
1.1. CONSULT THIS MANUAL
1.2. KOMATSU MACHINE OPERATOR PRIVACY POLICY
1.3. SAFETY INFORMATION
1.4. SAFETY LABELS
1.5. NOISE
1.6. VIBRATION LEVEL
1.6.1. VIBRATION OPERATING CONDITION
1.6.2. GUIDE TO REDUCE VIBRATION LEVELS ON MACHINE
1.7. INTRODUCTION
1.7.1. MAIN USE OF MACHINE
1.7.2. DEMOLITION WORK
1.7.3. DIRECTIONS OF MACHINE
1.7.4. VISIBILITY FROM OPERATORS SEAT
1.8. ENGINE TECHNOLOGY TO CONFORM EXHAUST GAS EMISSION
1.9. PRODUCT INFORMATION
1.9.1. LOCATION OF PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO.
1.9.2. LOCATION OF ENGINE NUMBER PLATE
1.9.3. FLUORINATED GREENHOUSE GASES
1.9.4. SERVICE METER LOCATION
1.9.5. YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
1.10. SERIAL PLATE
1.11. DECLARATION OF CONFORMITY
1.12. TABLE OF CONTENTS
2. SAFETY
2.1. SAFETY LABELS
2.1.1. LOCATION OF SAFETY LABELS
2.1.2. CONTENTS OF SAFETY LABELS
2.2. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
2.2.1. PRECAUTIONS BEFORE STARTING OPERATION
2.2.2. PREPARATIONS FOR SAFE OPERATION
2.2.3. PRECAUTIONS TO PREVENT FIRE
2.2.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
2.2.5. DO NOT GET CAUGHT IN WORK EQUIPMENT
2.2.6. PROTECTION AGAINST FALLING, FLYING OR INTRUDING OBJECTS
2.2.7. ACTIONS IN THE EVENT OF DAMAGE TO SAFETY STRUCTURES
2.2.8. UNAUTHORIZED MODIFICATION
2.2.9. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
2.2.10. PRECAUTIONS RELATED TO CAB GLASS
2.2.11. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
2.3. PRECAUTIONS FOR OPERATION
2.3.1. PRECAUTIONS FOR JOBSITE
2.3.2. START ENGINE
2.3.3. PRECAUTIONS FOR OPERATION
2.3.4. PRECAUTIONS FOR TRANSPORTATION
2.3.5. TOWING AND BEING TOWED
2.3.6. LIFTING OPERATION BY USING BUCKET WITH HOOK
2.3.7. LIFTING OPERATION BY USING LIFTING DEVICE (OPTIONAL EQUIPMENT)
2.4. PRECAUTIONS FOR MAINTENANCE
2.4.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
2.4.2. PRECAUTIONS FOR CHECK AND MAINTENANCE
3. OPERATION
3.1. GENERAL VIEW
3.1.1. MACHINE EQUIPMENT NAME
3.1.2. CAB EQUIPMENT NAMES
3.1.3. CONTROLS AND GAUGES NAMES
3.2. EXPLANATION OF COMPONENTS
3.2.1. EXPLANATION OF MACHINE MONITOR EQUIPMENT
3.2.3. SWITCHES
3.2.4. CONTROL LEVERS AND PEDALS
3.2.5. OTHER EQUIPMENT
3.3. MACHINE OPERATIONS AND CONTROLS
3.3.1. CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
3.3.2. METHOD FOR STARTING ENGINE
3.3.3. METHOD FOR OPERATIONS AND CHECKS AFTER STARTING ENGINE
3.3.4. METHOD FOR STOPPING ENGINE
3.3.5. METHOD FOR STARTING MACHINE (TRAVEL FORWARD AND REVERSE) AND STOPPING MACHINE
3.3.6. METHOD FOR TRAVELING ON ROAD
3.3.7. STEERING SELECTION METHOD
3.3.8. METHOD FOR SWINGING MACHINE
3.3.9. METHOD FOR OPERATING WORK EQUIPMENT
3.3.10. HANDLE WORKING MODE
3.3.11. PROHIBITED OPERATIONS
3.3.12. PRECAUTIONS FOR OPERATION
3.3.13. PRECAUTIONS WHEN WORKING IN DESCENT
3.3.14. METHOD FOR ESCAPING FROM MUD
3.3.15. RECOMMENDED APPLICATIONS
3.3.16. METHOD FOR LIFTING OBJECTS WITH LIFTING DEVICE
3.3.17. METHOD FOR REPLACING AND INVERTING BUCKET
3.3.18. METHOD FOR PARKING MACHINE
3.3.19. METHOD FOR CHECKING AFTER FINISHING WORK
3.3.20. LOCK
3.4. HANDLE AIR CONDITIONER
3.4.1. EXPLANATION OF AIR CONDITIONER EQUIPMENT
3.4.2. METHOD FOR OPERATING AIR CONDITIONER
3.5. HANDLE RADIO
3.5.1. RADIO SWITCHES
3.5.2. STOW ANTENNA
3.6. TRANSPORTATION
3.6.1. PRECAUTIONS FOR TRANSPORTING MACHINE
3.6.2. SELECT TRANSPORTATION METHOD
3.6.3. LOADING AND UNLOADING WITH TRAILER
3.6.4. METHOD FOR LIFTING MACHINE
3.7. COLD WEATHER OPERATION
3.7.1. COLD WEATHER OPERATION INFORMATION
3.7.2. PRECAUTIONS AFTER DAILY WORK COMPLETION
3.7.3. AFTER COLD WEATHER SEASON
3.8. PRECAUTIONS FOR LONGTERM STORAGE
3.8.1. PREPARATION FOR LONGTERM STORAGE
3.8.2. MAINTENANCE DURING LONGTERM STORAGE
3.8.3. STARTING MACHINE AFTER LONGTERM STORAGE
3.9. TROUBLES AND ACTIONS
3.9.1. ACTIONS WHEN RUNNING OUT OF FUEL
3.9.2. PHENOMENA THAT ARE NOT FAILURES
3.9.3. PRECAUTIONS FOR TOWING MACHINE
3.9.4. PRECAUTIONS FOR SEVERE JOB CONDITION
3.9.5. PRECAUTIONS FOR DISCHARGED BATTERY
3.9.6. OTHER TROUBLE
4. MAINTENANCE
4.1. PRECAUTIONS FOR MAINTENANCE
4.1.1. CHECK SERVICE METER READING
4.1.2. KOMATSU GENUINE REPLACEMENT PARTS
4.1.3. KOMATSU GENUINE LUBRICANTS
4.1.4. ALWAYS USE CLEAN WASHER FLUID
4.1.5. FRESH AND CLEAN LUBRICANTS
4.1.6. CHECK DRAINED OIL AND USED FILTER
4.1.7. PRECAUTIONS FOR REFILLING OIL OR FUEL
4.1.8. PRECAUTIONS FOR ADDING DEF
4.1.9. WELDING INSTRUCTIONS
4.1.10. DO NOT DROP THINGS INSIDE MACHINE
4.1.11. DUSTY JOBSITES
4.1.12. AVOID MIXING OIL
4.1.13. LOCKING INSPECTION COVERS
4.1.14. BLEED AIR FROM HYDRAULIC CIRCUIT
4.1.15. PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES
4.1.16. CHECKS AFTER INSPECTION AND MAINTENANCE
4.1.17. FUEL AND LUBRICANTS TO MATCH THE AMBIENT TEMPERATURE
4.2. OUTLINE OF MAINTENANCE
4.2.1. HANDLE OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
4.2.2. HANDLE ELECTRICAL COMPONENTS
4.3. STANDARD TIGHTENING TORQUE FOR BOLTS AND NUTS
4.4. MAINTENANCE SCHEDULE
4.4.1. MAINTENANCE SCHEDULE TABLE
4.4.2. MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
4.5. MAINTENANCE PROCEDURE
4.5.1. INITIAL 50 HOURS MAINTENANCE (ONLY AFTER THE FIRST 50 HOURS)
4.5.2. INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
4.5.3. INITIAL 500 HOURS MAINTENANCE (ONLY AFTER THE FIRST 500 HOURS)
4.5.4. WHEN REQUIRED
4.5.5. CHECKS BEFORE STARTING
4.5.6. EVERY 100 HOURS MAINTENANCE
4.5.7. EVERY 250 HOURS MAINTENANCE
4.5.8. EVERY 500 HOURS MAINTENANCE
4.5.9. EVERY 1000 HOURS MAINTENANCE
4.5.10. EVERY 2000 HOURS MAINTENANCE
4.5.11. EVERY 4000 HOURS MAINTENANCE
4.5.12. EVERY 4500 HOURS MAINTENANCE
4.5.13. EVERY 5000 HOURS MAINTENANCE
4.5.14. EVERY 8000 HOURS MAINTENANCE
4.5.15. EVERY 9000 HOURS MAINTENANCE
5. SPECIFICATIONS
5.1. SPECIFICATIONS
5.2. LIFTING CAPACITIES
6. ATTACHMENTS AND OPTIONS
6.1. PRECAUTIONS FOR USING ATTACHMENT AND OPTIONS
6.1.1. PRECAUTIONS WHEN SELECTING
6.1.2. READ THE OPERATION AND MAINTENANCE MANUAL THOROUGHLY
6.1.3. PRECAUTIONS WHEN REMOVING AND INSTALLING
6.1.4. PRECAUTIONS WHEN USING
6.2. QUICK COUPLER SYSTEM
6.2.1. HANDLE QUICK COUPLER
6.3. HANDLE BUCKET WITH HOOK
6.3.1. PRECAUTIONS FOR OPERATION
6.4. HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
6.4.1. EXPLANATION OF COMPONENTS
6.4.2. HYDRAULIC CIRCUIT
6.4.3. METHOD FOR REMOVING AND INSTALLING ATTACHMENT
6.4.4. METHOD FOR OPERATING ATTACHMENT
6.4.5. LONGTERM STORAGE
6.4.6. SPECIFICATIONS
6.5. ATTACHMENTS AND OPTIONS
6.5.1. INSTALL ATTACHMENT
6.6. RECOMMENDED ATTACHMENT OPERATIONS
6.6.1. HYDRAULIC BREAKER
7. REPLACEMENT PARTS
7.1. PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
7.1.1. DEFINED LIFE PARTS LIST
7.2. CONSUMABLE PARTS
7.2.1. CONSUMABLE PARTS LIST
7.3. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
7.3.1. LUBRICATION CHART
7.3.2. METHOD FOR USING FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
7.3.3. RECOMMENDED BRANDS AND QUALITIES OTHER THAN KOMATSU GENUINE OILS
8. INDEX

Rate this product