komatsu pw180 7e0 wheeled excavator operation and maintenance manual veam400101 1

komatsu pw180 7e0 wheeled excavator operation and maintenance manual veam400101 2

komatsu pw180 7e0 wheeled excavator operation and maintenance manual veam400101 3

komatsu pw180 7e0 wheeled excavator operation and maintenance manual veam400101 4

komatsu pw180 7e0 wheeled excavator operation and maintenance manual veam400101 5

Komatsu PW180-7E0 Wheeled Excavator Operation and Maintenance Manual VEAM400101

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: VEAM400101
Format: PDF
Size: 10.4MB
Number of Pages: 402

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- PW180-7E0 Wheeled Excavator

1. FOREWORD
1.1. FOREWORD
1.2. SAFETY INFORMATION
1.2.1. SAFETY MESSAGES
1.2.2. Noise emission levels
1.2.3. Vibration levels
1.2.4. EMERGENCY STEERING
1.2.5. EMERGENCY BRAKING
1.3. INTRODUCTION
1.3.1. INTENDED USE
1.3.2. FEATURES
1.3.3. RUNNING IN YOUR NEW MACHINE
1.4. LOCATIONS OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
1.4.1. MACHINE SERIAL NO. PLATE POSITION
1.4.2. ENGINE SERIAL NO. PLATE POSITION
1.4.3. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
1.4.4. MACHINE SERIAL PLATES
2. SAFETY
2.1. GENERAL PRECAUTIONS
2.2. PRECAUTION DURING OPERATION
2.2.1. BEFORE STARTING ENGINE
2.2.2. OPERATING MACHINE
2.2.3. TRANSPORTATION
2.2.4. BATTERY
2.2.5. TOWING
2.2.6. BUCKET WITH HOOK OR BUCKET LINK WITH LIFTING EYE
2.2.7. HANDLING OF FLUIDS
2.3. PRECAUTIONS FOR MAINTENANCE
2.3.1. BEFORE CARRYING OUT MAINTENANCE
2.3.2. DURING MAINTENANCE
2.4. POSITION FOR ATTACHING SAFETY LABELS
2.4.1. POSITION FOR ATTACHING SAFETY LABELS
2.5. LIFTING CAPACITY CHART PW1807E0
2.5.1. ONE PIECE BOOM Lift capacity tables for 2.5 metre undercarriage
2.5.2. ONE PIECE BOOM Lift capacity tables for 2.75 metre undercarriage
2.5.3. TWO PIECE BOOM Lift capacity tables for 2.5 metre undercarriage
2.5.4. TWO PIECE BOOM Lift capacity tables for 2.75 metre undercarriage
2.5.5. OVERLOAD CAUTION
3. OPERATION
3.1. GENERAL VIEW
3.1.1. GENERAL VIEW OF MACHINE
3.2. GENERAL VIEW OF CONTROLS AND GAUGES
3.3. EXPLANATION OF COMPONENTS
3.3.1. MACHINE MONITOR
3.3.2. BASIC CHECK ITEMS
3.4. SWITCHES
3.4.1. STARTING SWITCH
3.5. CONTROL LEVERS, PEDALS
3.5.1. FRONT WINDOW
3.5.2. EMERGENCY EXIT FROM OPERATORS CAB
3.5.3. CAP, COVER WITH LOCK
3.5.4. FUSE
3.5.5. LUGGAGE TRAY
3.5.6. ASHTRAY
3.5.7. CUP HOLDER
3.5.8. HOT AND COOL BOX
3.5.9. CAB RADIO
3.5.10. POWER PICKUP PORT
3.5.11. HANDLING AIR CONDITIONER
3.5.12. FUSIBLE LINK
3.5.13. CONTROLLER
3.5.14. TOOL BOX (CHASSIS)
3.5.15. REFUELLING PUMP
3.5.16. WARNING LAMPS
3.5.17. HANDLING ACCUMULATORS
3.6. OPERATION
3.6.1. CHECK BEFORE STARTING ENGINE
3.7. OPERATIONS AND CHECKS BEFORE STARTING ENGINE
3.7.1. STARTING ENGINE
3.7.2. MOVING MACHINE OFF
3.7.3. STEERING
3.7.4. TRAVELLING ON PUBLIC HIGHWAY
3.7.5. STOPPING PARKING
3.7.6. SWINGING (Slewing the upper carriage)
3.7.7. OPERATION OF WORK EQUIPMENT
3.7.8. WORKING MODE SELECTION
3.7.9. PROHIBITIONS FOR OPERATION
3.7.10. PRECAUTIONS FOR OPERATION
3.7.11. RECOMMENDATIONS FOR TRAVELLING
3.7.12. PRECAUTIONS WHEN TRAVELLING UP OR DOWN HILLS
3.7.13. HOW TO ESCAPE FROM MUD
3.7.14. WORK POSSIBLE USING HYDRAULIC EXCAVATOR
3.7.15. REPLACEMENT AND INVERSION OF BUCKET
3.7.16. STOPPING ENGINE
3.7.17. CHECK AFTER FINISHING WORK
3.8. CHECK AFTER STOPPING ENGINE
3.8.1. LOCKING
3.8.2. HANDLING THE WHEELS
3.9. TRANSPORTATION
3.9.1. TRANSPORTATION PROCEDURE
3.9.2. LOADING, UNLOADING WORK
3.9.3. SECURING MACHINE
3.9.4. UNLOADING
3.9.5. PRECAUTIONS FOR TRANSPORTATION
3.9.6. TRAVELLING POSTURE
3.10. COLD WEATHER OPERATION
3.10.1. PRECAUTIONS FOR LOW TEMPERATURE
3.10.2. PRECAUTIONS AFTER COMPLETION OF WORK
3.10.3. AFTER COLD WEATHER
3.11. LONGTERM STORAGE
3.11.1. BEFORE STORAGE
3.11.2. DURING STORAGE
3.11.3. AFTER STORAGE
3.11.4. STARTING MACHINE AFTER LONGTERM STORAGE
3.12. TROUBLESHOOTING
3.12.1. PHENOMENA THAT ARE NOT FAILURES
3.12.2. METHOD OF TOWING MACHINE
3.12.3. PRECAUTIONS ON PARTICULAR JOBSITES
3.12.4. DISCHARGED BATTERY
3.12.5. OTHER TROUBLE
4. MAINTENANCE
4.1. GUIDES TO MAINTENANCE
4.2. OUTLINE OF SERVICE
4.2.1. OUTLINE OF OIL, FUEL, COOLANT
4.2.2. OUTLINE OF ELECTRIC SYSTEM
4.2.3. OUTLINE OF HYDRAULIC SYSTEM
4.3. WEAR PARTS LIST
4.4. USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
4.4.1. PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
4.5. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
4.6. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
4.6.1. INTRODUCTION OF NECESSARY TOOLS
4.7. TIGHTENING TORQUE SPECIFICATIONS
4.7.1. TIGHTENING TORQUE LIST
4.8. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
4.8.1. SAFETY CRITICAL PARTS
4.9. MAINTENANCE SCHEDULE CHART
4.9.1. KEY TO LUBRICATION POINTS
4.10. MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
4.11. MAINTENANCE PROCEDURE
4.11.1. INITIAL 50 HOURS MAINTENANCE (ONLY AFTER THE FIRST 50 HOURS)
4.11.2. CHECK AND TIGHTEN WHEEL NUTS
4.11.3. INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
4.11.4. INITIAL 500 HOURS MAINTENANCE (ONLY AFTER THE FIRST 500 HOURS)
4.11.5. WHEN REQUIRED
4.11.6. CHECKING COOLANT LEVEL
4.11.7. CHECK AND TIGHTEN WHEEL NUTS
4.11.8. CHECK ELECTRICAL INTAKE AIR HEATER
4.11.9. CHECK ALTERNATOR
4.11.10. REPLACE BUCKET SIDE CUTTERS
4.11.11. REPLACE BUCKET TEETH
4.11.12. ADJUST BUCKET CLEARANCE
4.11.13. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
4.11.14. CHECK AND ADJUST AIR CONDITIONER
4.11.15. CHECK BEFORE STARTING
4.11.16. CHECK COOLANT LEVEL, ADD WATER
4.11.17. EVERY 50 HOURS
4.11.18. EVERY 100 HOURS SERVICE
4.11.19. EVERY 250 HOURS MAINTENANCE
4.11.20. EVERY 500 HOURS SERVICE
4.11.21. EVERY 1000 HOURS SERVICE
4.11.22. EVERY 2000 HOURS SERVICE
4.11.23. EVERY 4000 HOURS MAINTENANCE
4.11.24. EVERY 5000 HOURS SERVICE
5. SPECIFICATIONS
5.1. SPECIFICATIONS
5.1.1. PIECE BOOM
5.1.2. PIECE BOOM
5.1.3. WORKING RANGE ONE PIECE BOOM
5.1.4. WORKING RANGE TWO PIECE BOOM
6. OPTIONS, ATTACHMENTS
6.1. GENERAL PRECAUTIONS
6.1.1. PRECAUTIONS RELATED TO SAFETY
6.2. PRECAUTIONS WHEN INSTALLING ATTACHMENTS
6.3. HYDRAULIC QUICK COUPLER PIPING
6.3.1. LOCATIONS
6.3.2. OPERATION
6.4. HANDLING BUCKET WITH HOOK
6.4.1. CHECKING FOR DAMAGE TO BUCKET WITH HOOK
6.4.2. PROHIBITED OPERATIONS
6.4.3. PRECAUTIONS DURING OPERATIONS
6.5. MACHINES READY FOR ATTACHMENTS
6.5.1. HANDLING THE CLAMSHELL BUCKET
6.5.2. HYDRAULIC CIRCUIT
6.5.3. OPERATION
6.5.4. METHOD FOR RELEASING PRESSURE IN CONTROL CIRCUIT OF MACHINES EQUIPPED WITH ACCUMULATOR
6.5.5. LONGTERM STORAGE
6.6. INTRODUCTION OF ATTACHMENTS AND EXTENDING MACHINE SERVICE LIFE
6.6.1. HYDRAULIC BREAKER
6.6.2. POWER RIPPER
6.6.3. FORK GRAB
6.6.4. GRAPPLE BUCKET
6.6.5. SCRAP GRAPPLE
6.6.6. CRUSHER SMASHER
6.6.7. HYDRAULIC PILE DRIVER
6.6.8. HYDRAULIC EXCAVATOR WITH MULTIPURPOSE CRANE
6.7. ROTATING ARM
6.7.1. GENERAL LOCATION AND SPECIFICATIONS.
6.7.2. MAINTENANCE REQUIREMENT

Rate this product