komatsu saa6d170e 3 diesel engine operation and maintenance manual seam062700p 1 2

komatsu saa6d170e 3 diesel engine operation and maintenance manual seam062700p 2

komatsu saa6d170e 3 diesel engine operation and maintenance manual seam062700p 3

komatsu saa6d170e 3 diesel engine operation and maintenance manual seam062700p 4

komatsu saa6d170e 3 diesel engine operation and maintenance manual seam062700p 5

Komatsu SAA6D170E-3 Diesel Engine Operation and Maintenance Manual SEAM062700P

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: SEAM062700P
Format: PDF
Size: 3.5MB
Number of Pages: 90

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- SAA6D170E-3 Diesel Engine

1. COVER
2. FOREWORD
2.1. FOREWORD
2.2. SAFETY INFORMATION
2.3. PRODUCT INFORMATION
2.3.1. ENGINE SERIAL NO. PLATE POSITION
2.3.2. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
3. CONTENTS
4. SAFETY
4.1. SAFETY INFORMATION
4.2. GENERAL PRECAUTIONS
4.2.1. SAFETY RULES
4.2.2. IF ABNORMALITIES ARE FOUND
4.2.3. CLOTHING AND PERSONAL PROTECTIVE ITEMS
4.2.4. FIRE EXTINGUISHER AND FIRST AID KIT
4.2.5. SAFETY FEATURES
4.2.6. KEEP MACHINE CLEAN
4.2.7. PREVENTION OF BURNS
4.2.8. FIRE PREVENTION
4.2.9. UNAUTHORIZED MODIFICATION
4.2.10. PRECAUTIONS RELATED TO VENTILATION OF EXHAUST GAS
4.3. PRECAUTIONS FOR OPERATION
4.3.1. STARTING ENGINE
4.3.1.1. CHECKS BEFORE STARTING ENGINE, ADJUST
4.3.1.2. PRECAUTIONS WHEN STARTING
4.3.1.3. PRECAUTIONS IN COLD AREAS
4.3.2. OPERATION
4.3.2.1. CHECKS BEFORE STARTING OPERATION
4.3.3. TRANSPORTATION
4.3.3.1. SHIPPING
4.3.4. BATTERY
4.3.4.1. BATTERY HAZARD PREVENTION
4.4. PRECAUTIONS FOR MAINTENANCE
4.4.1. WARNING TAG
4.4.2. KEEP WORK PLACE CLEAN AND TIDY
4.4.3. APPOINT LEADER WHEN WORKING WITH OTHERS
4.4.4. STOP ENGINE BEFORE CARRYING OUT INSPECTION AND MAINTENANCE
4.4.5. TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
4.4.6. MIND YOUR STEP WHEN CARRYING OUT MAINTENANCE
4.4.7. PROPER TOOLS
4.4.8. LIFT ENGINE CAREFULLY
4.4.9. PERSONNEL
4.4.10. NOISE
4.4.11. PRECAUTIONS WHEN USING HAMMER
4.4.12. REPAIR WELDING
4.4.13. REMOVING BATTERY TERMINAL
4.4.14. PRECAUTIONS WITH HIGHPRESSURE OIL
4.4.15. PRECAUTIONS FOR HIGHPRESSURE FUEL
4.4.16. HANDLING HIGHPRESSURE HOSES, PIPING
4.4.17. PRECAUTIONS FOR HIGH VOLTAGE
4.4.18. WASTE MATERIALS
4.4.19. COMPRESSED AIR
4.4.20. PERIODIC REPLACEMENT OF SAFETYCRITICAL PARTS
5. OPERATION
5.1. GENERAL VIEW
5.1.1. GENERAL VIEW OF ENGINE
5.1.2. EXTERIOR VIEW OF FUEL FILTER UNIT
5.2. EXPLANATION OF COMPONENTS
5.2.1. METER
5.2.2. SWITCHES
5.2.3. DUST INDICATOR
5.3. OPERATION
5.3.1. CHECK BEFORE STARTING ENGINE
5.3.2. STARTING ENGINE
5.3.3. OPERATIONS, CHECKS AFTER STARTING ENGINE
5.3.4. STOPPING ENGINE
5.3.5. EMERGENCY STOPPING
5.3.6. CHECK AFTER STOPPING ENGINE
5.3.7. MAINTENANCE OPERATION OF ENGINE FOR EMERGENCY GENERATOR SPECIFICATION
5.4. TRANSPORTATION
5.4.1. METHOD OF LIFTING ENGINE
5.5. COLD WEATHER OPERATION
5.5.1. PRECAUTIONS FOR LOW TEMPERATURE
5.5.2. AFTER COLD WEATHER
5.6. LONGTERM STORAGE
5.6.1. BEFORE STORAGE
5.6.2. DURING STORAGE
5.6.3. AFTER STORAGE
5.7. TROUBLESHOOTING
5.7.1. AFTER RUNNING OUT OF FUEL
5.7.2. IF BATTERY IS DISCHARGED
5.7.3. OTHER TROUBLE
6. MAINTENANCE
6.1. GUIDE TO MAINTENANCE
6.2. OUTLINE OF SERVICE
6.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
6.2.2. OUTLINE OF ELECTRIC SYSTEM
6.3. WEAR PARTS
6.3.1. WEAR PARTS LIST
6.4. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
6.4.1. FUEL, OIL COOLANT
6.4.2. HANDLING WHEN USING A GRADE HEAVY OIL AS FUEL
6.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
6.5.1. TORQUE LIST
6.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
6.6.1. SAFETY CRITICAL PARTS
6.7. MAINTENANCE SCHEDULE CHART
6.7.1. MAINTENANCE SCHEDULE CHART
6.8. SERVICE PROCEDURE
6.8.1. INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
6.8.2. WHEN REQUIRED
6.8.2.1. CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
6.8.2.2. CLEAN INSIDE OF COOLING SYSTEM
6.8.2.3. CHECK ELECTRIC HEATER (IF EQUIPPED)
6.8.2.4. CLEAN, INSPECT RADIATOR WITH AIRCOOLED FUEL COOLER, AIRCOOLED AFTERCOOLER
6.8.3. CHECK BEFORE STARTING
6.8.4. EVERY 500 HOURS SERVICE
6.8.4.1. CHECK LEVEL OF BATTERY ELECTROLYTE
6.8.4.2. CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
6.8.4.3. REPLACE FUEL FILTER CARTRIDGE
6.8.5. EVERY 1000 HOURS SERVICE
6.8.5.1. REPLACE CORROSION RESISTOR CARTRIDGE (IF EQUIPPED)
6.8.5.2. CHECK FOR LOOSE ELECTRONIC GOVERNMENT, CONTROLLER MOUNTING BOLTS
6.8.6. EVERY 2000 HOURS SERVICE
6.8.6.1. CLEAN ENGINE BREATHER ELEMENT
6.8.6.2. LUBRICATING
6.8.6.3. CHECK FAN BELT TENSION, ADJUST
6.8.6.4. CHECK ALTERNATOR, STARTING MOTOR
6.8.6.5. CHECK PALY OF TURBOCHARGER ROTOR
6.8.6.6. CHECK HOSES
6.8.6.7. CHECK, ADJUST INJECTOR
6.8.6.8. CHECK MOUNTING BOLTS
6.8.6.9. CHRCK ENGINE VALVE CLEARANCE, ADJUST
6.8.7. EVERY 4000 HOURS SERVICE
6.8.7.1. CHECK WATER PUMP
6.8.7.2. CHECK VIBRATION DAMPER
6.8.7.3. CHECK FOR CRACKS
6.8.7.4. REPLACE FAN BELT
6.8.8. EVERY 8000 HOURS SERVICE
6.8.8.1. CHECK EXHAUST MUFFLER, EXHAUST MANIFOLD, EXHAUST FLEXIBLE PIPE, INTAKE MANIFOLD
6.8.8.2. CHECK BATTERY SWITCH, STARTING MOTOR, EMERGENCY RELAY
6.8.8.3. CHECK COOLANT HEATER
6.8.8.4. CHECK, MAINTAIN INTAKE VALVE SEAT, EXHAUST VALVE SEAT
6.8.8.5. CLEAN, CHECK TURBOCHARGER
6.8.8.6. REPLACEMENT OF PARTS
6.8.9. EVERY 16000 HOURS SERVICE
6.8.9.1. COMPLETE OVERHAUL OF ENGINE
6.8.10. EVERY 24000 HOURS SERVICE
6.8.10.1. REPLACEMENT OF FUEL PUMP
7. SPECIFICATIONS
7.1. SPECIFICATIONS
8. INDEX

Rate this product