komatsu wa600 6 wheel loader operation and maintenance manual ten00462 14 1

komatsu wa600 6 wheel loader operation and maintenance manual ten00462 14 2

komatsu wa600 6 wheel loader operation and maintenance manual ten00462 14 3

komatsu wa600 6 wheel loader operation and maintenance manual ten00462 14 4

komatsu wa600 6 wheel loader operation and maintenance manual ten00462 14 5

Komatsu WA600-6 Wheel Loader Operation and Maintenance Manual TEN00462-14

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: TEN00462-14
Format: PDF
Size: 14.6MB
Number of Pages: 473

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- WA600-6 Wheel Loader

1. COVER
2. FOREWORD
2.1. READ THIS MANUAL
2.2. SAFETY INFORMATION
2.3. INTRODUCTION
2.3.1. USE OF MACHINE
2.3.2. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
2.3.3. VISIBILITY FROM OPERATORS SEAT
2.4. NECESSARY INFORMATION
2.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
2.4.2. ENGINE SERIAL NO. PLATE
2.4.3. LOCATION OF AUTHORIZATION LABEL OF ANCHOR POINT FOR TIEOFF
2.4.4. POSITION OF SERVICE METER
2.4.5. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
2.5. CONTENTS
3. SAFETY
3.1. SAFETY
3.2. SAFETY LABELS
3.2.1. LOCATION OF SAFETY LABELS
3.2.2. SAFETY LABELS
3.3. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
3.3.1. PRECAUTIONS BEFORE STARTING OPERATION
3.3.2. PREPARATIONS FOR SAFE OPERATION
3.3.3. FIRE PREVENTION
3.3.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
3.3.5. DO NOT GET CAUGHT IN ARTICULATING PORTION
3.3.6. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
3.3.7. UNAUTHORIZED MODIFICATION
3.3.8. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
3.3.9. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
3.4. PRECAUTIONS FOR OPERATION
3.4.1. PRECAUTIONS FOR JOBSITE
3.4.2. STARTING ENGINE
3.4.3. OPERATION
3.4.4. TRANSPORTATION
3.4.5. TOWING
3.5. PRECAUTIONS FOR MAINTENANCE
3.5.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
3.5.2. PRECAUTIONS FOR INSPECTION AND MAINTENANCE
3.5.3. TIRES
4. OPERATION
4.1. GENERAL VIEW
4.1.1. GENERAL VIEW OF MACHINE
4.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
4.2. EXPLANATION OF COMPONENTS
4.2.1. MACHINE MONITOR
4.2.2. SWITCHES
4.2.3. CONTROL LEVERS, PEDALS
4.2.4. CAP WITH LOCK
4.2.5. FRAME LOCK BAR
4.2.6. TOWING PIN
4.2.7. BACKUP ALARM
4.2.8. OPENING, CLOSING CAB DOORS, WINDOWS
4.2.9. HANDLING CAB WIPER
4.2.10. DUST INDICATOR
4.2.11. FUSE
4.2.12. CIRCUIT BREAKER
4.2.13. SLOW BLOW FUSE
4.2.14. LUNCH BOX TRAY
4.2.15. TOOL BOX
4.2.16. GREASE PUMP
4.2.17. LOCATION OF FIRE EXTINGUISHER
4.2.18. POWER OUTLET
4.2.19. AM/FM RADIOCASSETTE STEREO
4.2.20. AIR CONDITIONER
4.3. OPERATION
4.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
4.3.2. STARTING ENGINE
4.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
4.3.4. STOPPING ENGINE
4.3.5. CHECK AFTER STOPPING ENGINE
4.3.6. MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE
4.3.7. TURNING
4.3.8. OPERATION OF WORK EQUIPMENT
4.3.9. SEMI AUTO DIGGING OPERATIONS
4.3.10. REMOTE POSITIONER
4.3.11. WORK POSSIBLE USING WHEEL LOADER
4.3.12. PRECAUTIONS FOR OPERATION
4.3.13. REMOVAL AND INSTALLATION OF THE BUCKET
4.3.14. PARKING MACHINE
4.3.15. CHECKS AFTER COMPLETION OF OPERATION
4.3.16. LOCKING
4.3.17. HANDLING THE TIRES
4.4. TRANSPORTATION
4.4.1. TRANSPORTATION PROCEDURE
4.4.2. LOADING, UNLOADING WORK
4.4.3. METHOD OF SECURING MACHINE
4.4.4. METHOD OF LIFTING MACHINE
4.4.5. PRECAUTIONS WHEN DISASSEMBLY OR REASSEMBLING WORK EQUIPMENT
4.5. COLD WEATHER OPERATION
4.5.1. PRECAUTIONS FOR LOW TEMPERATURE
4.5.2. PRECAUTIONS AFTER COMPLETION OF WORK
4.5.3. AFTER COLD WEATHER
4.5.4. WARMINGUP OPERATION FOR STEERING HYDRAULIC CIRCUIT IN COLD WEATHER
4.6. LONGTERM STORAGE
4.6.1. BEFORE STORAGE
4.6.2. DURING STORAGE
4.6.3. AFTER STORAGE
4.7. TROUBLESHOOTING
4.7.1. WHEN MACHINE RUNS OUT OF FUEL
4.7.2. METHOD OF TOWING MACHINE
4.7.3. IF BATTERY IS DISCHARGED
4.7.4. METHOD FOR LOWERING WORK EQUIPMENT WHEN ENGINE HAS STOPPED
4.7.5. OTHER TROUBLE
5. MAINTENANCE
5.1. GUIDES TO MAINTENANCE
5.2. OUTLINES OF SERVICE
5.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
5.2.2. OUTLINE OF ELECTRIC SYSTEM
5.3. WEAR PARTS
5.3.1. WEAR PARTS LIST
5.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
5.4.1. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
5.4.2. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
5.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
5.5.1. TORQUE LIST
5.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
5.6.1. SAFETY CRITICAL PARTS
5.7. MAINTENANCE SCHEDULE CHART
5.7.1. MAINTENANCE SCHEDULE CHART
5.8. SERVICE PROCEDURE
5.8.1. EVERY 10 HOURS SERVICE (ONLY FOR FIRST 50 HOURS)
5.8.2. INITIAL 250 HOURS SERVICE
5.8.3. WHEN REQUIRED
5.8.4. CHECK BEFORE STARTING
5.8.5. EVERY 50 HOURS SERVICE
5.8.6. EVERY 100 HOURS SERVICE
5.8.7. EVERY 250 HOURS SERVICE
5.8.8. EVERY 500 HOURS SERVICE
5.8.9. EVERY 1000 HOURS SERVICE
5.8.10. EVERY 2000 HOURS SERVICE
5.8.11. EVERY 4000 HOURS SERVICE
5.8.12. EVERY 8000 HOURS SERVICE
5.8.13. EVERY 6 MONTHS MAINTENANCE
6. SPECIFICATIONS
6.1. SPECIFICATIONS
7. ATTACHMENTS, OPTIONS
7.1. HANDLING STEERING WHEEL SPECIFICATION MACHINE
7.1.1. EXPLANATION OF COMPONENTS
7.1.2. FUNCTIONS OF STEERING WHEEL SPECIFICATION MACHINE
7.2. SELECTING BUCKET AND TIRES
7.3. STARTING IN COLD AREAS
7.3.1. ELECTRIC HEATER
7.4. HANDLING LOAD METER
7.4.1. OUTLINE OF LOAD METER
7.4.2. PRINCIPLE OF LOAD METER MEASUREMENT
7.4.3. POINTS TO REMEMBER TO ENSURE HIGH ACCURACY
7.4.4. USING LOAD METER
7.5. HANDLING AUTOGREASING SYSTEM
7.5.1. METHOD OF OPERATING AUTOGREASING SYSTEM
7.5.2. PRECAUTIONS WHEN HANDLING AUTOGREASING SYSTEM
7.5.3. TROUBLESHOOTING
7.6. HANDLING QUICK COUPLER CONTROL SYSTEM
7.6.1. EXPLANATION OF COMPONENTS
7.6.2. FUNCTION AND METHOD OF OPERATION OF QUICK COUPLER SWITCH
7.6.3. METHOD OF REMOVING AND INSTALLING ATTACHMENT
7.6.4. INSPECTION AND MAINTENANCE
7.6.5. METHOD OF TURNING BOTTOM FRONT WORKING LAMP ON/OFF
7.7. HANDLING BATTERY DISCONNECT SWITCH
7.7.1. EXPLANATION OF COMPONENTS
7.7.2. HANDLING
7.8. HANDLING STARTING AID CONNECTOR
7.9. HANDLING REAR FENDER
7.9.1. HANDLING
7.10. METHOD OF USING 3 LEVERS
7.10.1. EXPLANATION OF COMPONENTS
7.11. HANDLING MACHINES EQUIPPED WITH KOMTRAX Plus
7.11.1. KOMTRAX Plus INSTALLED, COMMUNICATIONS TERMINAL NOT INSTALLED
7.11.2. KOMTRAX Plus AND COMMUNICATIONS TERMINAL INSTALLED
8. INDEX

Rate this product