Komatsu WH609-1, WH613-1, WH713-1, WH714-1, WH714H-1, WH716-1 Telescopic Handler Operation and Maintenance Manual WEAM005900

Komatsu WH609-1, WH613-1, WH713-1, WH714-1, WH714H-1, WH716-1 Telescopic Handler Operation and Maintenance Manual WEAM005900 - Image 2

Komatsu WH609-1, WH613-1, WH713-1, WH714-1, WH714H-1, WH716-1 Telescopic Handler Operation and Maintenance Manual WEAM005900 - Image 3

Komatsu WH609-1, WH613-1, WH713-1, WH714-1, WH714H-1, WH716-1 Telescopic Handler Operation and Maintenance Manual WEAM005900 - Image 4

Komatsu WH609-1, WH613-1, WH713-1, WH714-1, WH714H-1, WH716-1 Telescopic Handler Operation and Maintenance Manual WEAM005900 - Image 5

komatsu wh609 1 wh613 1 wh713 1 wh714 1 wh714h 1 wh716 1 telescopic handler operation and maintenance manual weam005900 2

komatsu wh609 1 wh613 1 wh713 1 wh714 1 wh714h 1 wh716 1 telescopic handler operation and maintenance manual weam005900 3

Komatsu WH609-1, WH613-1, WH713-1, WH714-1, WH714H-1, WH716-1 Telescopic Handler Operation and Maintenance Manual WEAM005900

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: WEAM005900
Format: PDF
Size: 20.7MB
Number of Pages: 254

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- WH609-1 Telescopic Handler
- WH613-1 Telescopic Handler
- WH713-1 Telescopic Handler
- WH714-1 Telescopic Handler
- WH714H-1 Telescopic Handler
- WH716-1 Telescopic Handler

1. FOREWORD
2. INFORMATION ON SAFETY
3. INTRODUCTION
3.1. INTENDED USES
3.2. IMPROPER OR UNAUTHORIZED USE
3.3. MAIN CHARACTERISTICS
3.4. RUNNINGIN
4. PRODUCT IDENTIFICATION
4.1. MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN)
4.2. MACHINE IDENTIFICATION PLATE
4.3. ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
4.4. FRONT AXLE SERIAL NUMBER
4.5. REAR AXLE SERIAL NUMBER
4.6. TRANSMISSION SERIAL NUMBER
4.7. CAB SERIAL NUMBER
4.8. SERIAL NUMBERS AND DEALERS ADDRESS
5. TABLE OF CONTENTS
6. SAFETY, NOISE AND VIBRATION PLATES
6.1. POSITION OF THE SAFETY PLATES
6.2. PICTOGRAMS AND RELEVANT MEANINGS
6.3. POSITION OF THE NOISE PLATES
7. GENERAL PRECAUTIONS
7.1. GENERAL SAFETY RULES
7.2. SAFETY DEVICES AND GUARDS
7.3. CLOTHING AND PERSONAL PROTECTION ITEMS
7.4. UNAUTHORIZED MODIFICATIONS
7.5. LEAVING THE OPERATORS SEAT
7.6. GETTING ON AND OFF THE MACHINE
7.7. CHECKING THE REARVIEW MIRRORS
7.8. PREVENTING FIRES DUE TO FUEL AND OIL
7.9. PREVENTING BURNS
7.10. PREVENTING DAMAGE DUE TO ASBESTOS POWDER
7.11. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
7.12. FIRE EXTINGUISHERS AND FIRST AID KIT
7.13. PRECAUTIONS CONCERNING THE CAB STRUCTURE
7.14. PRECAUTIONS CONCERNING THE EQUIPMENT
8. PRECAUTIONS TO BE TAKEN BEFORE STARTING WORK
8.1. SAFETY ON THE WORKSITE
8.2. FIRE PREVENTION
8.3. PRECAUTIONS CONCERNING THE DRIVING POSITION
8.4. ROOM VENTILATION
8.5. PRECAUTIONS CONCERNING THE LIGHTS
8.6. CLEANING THE WINDOWS AND THE REARVIEW MIRRORS CHECKING THE WINDSHIELD WIPER BLADES
9. PRECAUTIONS TO BE TAKEN DURING WORK
9.1. WHEN STARTING THE ENGINE
9.2. RULES FOR TRAVELLING ON ROADS
9.3. CHECKS FOR TRAVELLING IN REVERSE.
9.4. MOVING THE MACHINE
9.5. MOVING ON SLOPES
9.6. WORKING ON SLOPES
9.7. UNAUTHORIZED OPERATIONS
9.8. WORKING IN WINDY WEATHER CONDITIONS
9.9. MAIN OPERATING MODES
9.10. PREVENTING ELECTROCUTION
9.11. VISIBILITY
9.12. WORKING ON ICY OR SNOWCOVERED SURFACES
9.13. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
9.14. WORKING ON LOOSE GROUND
9.15. PARKING THE MACHINE
10. TRANSPORTING THE MACHINE ON OTHER VEHICLES
10.1. LOADING AND UNLOADING THE MACHINE
10.2. THE ROUTE
11. BATTERY
11.1. SAFETY PRECAUTIONS FOR WORK ON BATTERIES
11.2. STARTING WITH BOOSTER CABLES
12. PRECAUTIONS FOR EMERGENCY RECOVERY
13. PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
13.1. WARNING PLATES
13.2. TOOLS
13.3. PERSONNEL
13.4. EQUIPMENT
13.5. WORKING UNDER THE MACHINE
13.6. KEEPING THE MACHINE CLEAN
13.7. USE OF THE ENGINE DURING MAINTENANCE
13.8. PERIODICAL CHANGE OF THE PARTS THAT ARE CRITICAL FOR SAFETY
13.9. RULES TO BE FOLLOWED WHEN REFUELLING OR ADDING OIL
13.10. CHECKING THE COOLANT LEVEL IN THE RADIATOR
13.11. USING LAMPS
13.12. PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR
13.13. PRECAUTIONS CONCERNING THE STARTER
13.14. PRECAUTIONS CONCERNING THE GEAR LEVER
13.15. PRECAUTIONS CONCERNING HIGHPRESSURE HOSES AND FUEL PIPES
13.16. PRECAUTIONS TO BE TAKEN WHEN WORKING ON HIGH PRESSURE SYSTEMS
13.17. PRECAUTIONS FOR MAINTENANCE WORK INVOLVING HIGH TEMPERATURES AND PRESSURES
13.18. COOLING FAN AND FAN BELT
13.19. WASTE MATERIALS
13.20. PRECAUTIONS CONCERNING TECHNOPOLYMERS AND ELASTOMERS
13.21. PRECAUTIONS TO BE TAKEN WHEN INFLATING TYRES
13.22. PRECAUTIONS TO BE TAKEN WHEN USING SYNTHETIC BIODEGRADABLE OIL TYPE HEES
14. GENERAL VIEWS
14.1. RIGHT SIDE VIEW
14.2. LEFT SIDE VIEW
14.3. CAB INSIDE GENERAL VIEW
15. INSTRUMENTS AND CONTROLS
15.1. INSTRUMENTS
15.2. WARNING LIGHTS
15.3. SWITCHES AND PUSH BUTTONS
15.4. ELECTRIC ACCESSORIES
15.5. MACHINE CONTROLS
16. LIFTING LOADS
16.1. READING THE LOAD CHARTS
17. FUSES AND RELAYS
17.1. CENTRAL UNIT FUSES AND RELAYS
17.2. ENGINE LINE FUSES AND RELAYS
18. GUARDS, CAB AND DRIVERS SEAT
18.1. ENGINE HOOD
18.3. EMERGENCY EXIT
18.4. VENTILATION AND HEATING
18.5. AIR CONDITIONER (optional)
18.6. SEAT
18.7. STEERING WHEEL
18.8. SAFETY BELT
18.9. WINDOW SHADE
18.10. TECHNICAL DOCUMENTATION
18.11. FIRE EXTINGUISHER
19. USE OF THE MACHINE
19.1. CHECKS TO BE CARRIED OUT BEFORE STARTING THE ENGINE
19.2. STARTING THE ENGINE
19.3. WARMING THE ENGINE
19.4. HEATING THE HYDRAULIC OIL
19.5. HOW TO MOVE THE MACHINE
20. PARKING THE MACHINE
20.1. PARKING ON LEVEL GROUND
20.2. PARKING ON SLOPES
21. STOPPING THE ENGINE
22. TRANSPORTING THE MACHINE ON OTHER VEHICLES
22.1. LOADING AND UNLOADING THE MACHINE
22.2. TRANSPORT
22.3. LIFTING THE MACHINE
23. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON AND IN COLD PLACES
23.1. FUEL AND LUBRICANTS
23.2. ENGINE COOLANT
23.3. BATTERY
23.4. OTHER PRECAUTIONS
23.5. PRECAUTIONS TO BE TAKEN AT THE END OF WORK
24. PRECAUTIONS TO BE TAKEN IN THE WARM SEASON
25. EQUIPMENT
25.1. INSTALLING EQUIPMENT WITH HYDRAULIC QUICK COUPLING
25.2. INSTALLING EQUIPMENT WITH MANUAL COUPLING
25.3. INSTALLING EQUIPMENT REQUIRING HYDRAULIC POWER (4X1 BUCKET FORKS ROUND BALE GRIPPERS, ETC.)
25.4. ORGANIZING THE WORK AREA
25.5. OPERATING THE EQUIPMENT
25.6. OPERATING THE MACHINE FITTED WITH FORKS
25.7. PREPARING THE MACHINE FOR TRAVELLING ON ROADS
25.8. USING THE MACHINE AS A LOADER
26. LONG PERIODS OF INACTIVITY
26.1. PREPARING THE MACHINE FOR A LONG PERIOD OF INACTIVITY
26.2. PREPARING THE ENGINE FOR A LONG PERIOD OF INACTIVITY
26.3. MAINTENANCE DURING A PERIOD OF INACTIVITY
26.4. RESTARTING THE ENGINE
26.5. AFTER A LONG PERIOD OF INACTIVITY
27. OPERATIONS IN CASE OF FAILURE
27.1. IF THE ENGINE BREAKS DOWN WITH BOOM LOADED, LIFTED AND EXTENDED
27.2. REMOVING THE MACHINE IN CASE OF FAILURE
27.3. IF THE FUEL HAS RUN OUT
27.4. IF THE ENGINE FAILS TO START BECAUSE THE BATTERY HAS RUN DOWN
27.5. OTHER TROUBLES
28. GUIDE TO MAINTENANCE
29. MAINTENANCE NOTES
29.1. NOTES REGARDING THE ENGINE
29.2. NOTES REGARDING THE HYDRAULIC SYSTEM
29.3. NOTES REGARDING THE ELECTRIC SYSTEM
29.4. NOTES REGARDING LUBRICATION
29.5. PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING
30. FUEL, COOLANT AND LUBRICANTS
30.1. LUBRICATION WITH GREASE
30.2. HOMOLOGATED SYNTHETIC BIODEGRADABLE LUBRICANTS HEES
31. DRIVING TORQUES FOR SCREWS AND NUTS
31.1. STANDARD DRIVING TORQUES
31.2. SPECIFIC DRIVING TORQUES
32. LUBRICATION
32.1. LUBRICATION DIAGRAM (2SECTION BOOM)
32.2. LUBRICATION DIAGRAM (3SECTION BOOM)
33. PERIODICAL CHANGE OF THE SAFETYRELATED COMPONENTS
33.1. CRITICAL PARTS FOR SAFETY
34. MAINTENANCE PLAN
34.1. WHEN REQUIRED
34.2. MAINTENANCE EVERY 10 HOURS OF OPERATION OR EVERY DAY
34.3. MAINTENANCE EVERY 50 HOURS OF OPERATION OR EVERY 2 WEEKS
34.4. MAINTENANCE EVERY 100 HOURS OF OPERATION
34.5. MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION
34.6. MAINTENANCE EVERY 250 HOURS OF OPERATION OR EVERY 3 MONTHS
34.7. MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION (Only for machines in which synthetic biodegradable oil HEES is used)
34.8. MAINTENANCE EVERY 500 HOURS OF OPERATION OR EVERY 6 MONTHS
34.9. MAINTENANCE EVERY 1000 HOURS OF OPERATION OR EVERY YEAR
34.10. MAINTENANCE EVERY 2000 HOURS OF OPERATION OR EVERY 2 YEARS
34.11. MAINTENANCE EVERY 3 YEARS
34.12. MAINTENANCE EVERY 3000 HOURS OF OPERATION OR EVERY 3 YEARS
35. TECHNICAL DATA
35.1. DIMENSIONS WITH FORKS
35.2. TECHNICAL CHARACTERISTICS
35.3. VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED
35.4. LOAD DISTRIBUTION ON THE AXLES
35.5. OPERATING PERFORMANCE

Rate this product