Support
Email
admin@automanual.net
Follow us
Linde 115-03 - R10C, R12C, R14C Operating Instructions SN 10.07 and up SN up to 12.09
Linde 115-03 - R10C, R12C, R14C Operating Instructions SN 10.07 and up SN up to 12.09 - Image 2
Linde 115-03 - R10C, R12C, R14C Operating Instructions SN 10.07 and up SN up to 12.09 - Image 3
Linde 115-03 - R10C, R12C, R14C Operating Instructions SN 10.07 and up SN up to 12.09 - Image 4
Linde 115-03 - R10C, R12C, R14C Operating Instructions SN 10.07 and up SN up to 12.09 - Image 5
linde 115 03 r10c r12c r14c operating instructions sn 1007 and up sn up to 1209 2
linde 115 03 r10c r12c r14c operating instructions sn 1007 and up sn up to 1209 3
linde 115 03 r10c r12c r14c operating instructions sn 1007 and up sn up to 1209 4
linde 115 03 r10c r12c r14c operating instructions sn 1007 and up sn up to 1209 5

Linde 115-03 – R10C, R12C, R14C Operating Instructions SN 10.07 and up SN up to 12.09

$20.00

  • Type Of Manual: Operating Instructions
  • Manual ID: SN 10.07 and up SN up to 12.09
  • Format: PDF
  • Size: 26.7MB
  • Number of Pages: 234
  • Serial Number:
    SN 10.07 and up SN up to 12.09
Category:
  • Model List:

    • R10C
    • R12C
    • R14C
  • 1. Electric reach truckR10C03, R12C03, R14C03, R1403, R14HD03, R14N03, R1603, R16HD03, R16N03, R2003, R20N03
  • 1.1. Table of content
  • 1.2. Introduction and general description
  • 1.2.1. Introduction
  • 1.2.2. EC declaration of conformity
  • 1.2.3. General description
  • 1.3. Safety
  • 1.3.1. Operator safety guidelines
  • 1.3.2. Residual risks
  • 1.3.3. Stability
  • 1.3.4. In the event of tipover
  • 1.3.5. Noise emission levels
  • 1.3.6. Frequency characteristic for human body vibrations
  • 1.4. Getting to know the truck
  • 1.4.1. Location of identification plates and labels
  • 1.4.2. Truck type.capacity plate
  • 1.4.3. General view of truck
  • 1.4.4. Operating controls and indicators
  • 1.4.5. Operators display
  • 1.4.6. Lift height indicator (LHI)
  • 1.4.7. Definition of direction of travel
  • 1.5. Operation
  • 1.5.1. Runningin instructions
  • 1.5.2. Preshift checks
  • 1.5.3. The battery
  • 1.5.4. Operator adjustments
  • 1.5.5. Braking twin pedal
  • 1.5.6. Braking single pedal
  • 1.5.7. Driving twin pedal
  • 1.5.8. Driving single pedal
  • 1.5.9. Travelling on an incline
  • 1.5.10. Operating the mast and attachments (with two joystick control)
  • 1.5.11. Operating the mast and attachments (with four joystick control)
  • 1.5.12. Handling loads
  • 1.5.13. Before leaving the truck
  • 1.5.14. Cold store cabin
  • 1.5.15. Ambient temperature cabin
  • 1.5.16. Steering (Option)
  • 1.5.17. Opposite direction steering (Option)
  • 1.5.18. Height preselector LPS (option)
  • 1.5.19. Operator code entry (Option)
  • 1.5.20. Data Logger (Option)
  • 1.5.21. Truck data management LFM (Option)
  • 1.5.22. Side guidance for drivein racking
  • 1.5.23. Closed circuit television
  • 1.6. Maintenance
  • 1.6.1. Maintenance safety guidelines
  • 1.6.2. Report of Thorough Examination
  • 1.6.3. Covers and cowlings
  • 1.6.4. Fuses
  • 1.6.5. Emergency lower
  • 1.6.6. Emergency steering and parking brake release
  • 1.6.7. Slinging the truck
  • 1.6.8. Securing for transportation
  • 1.6.9. Jacking the truck
  • 1.6.10. Towing procedure
  • 1.6.11. Mast unit
  • 1.6.12. Securing the mast against tilting (Compact version)
  • 1.6.13. Recommended lubricants
  • 1.6.14. Inspection and maintenance data
  • 1.6.15. Inspection and maintenance schedule
  • 1.6.15.1. Routine inspection and maintenance
  • 1.6.15.2. Preshift checks
  • 1.6.15.3. Inspection and maintenance after the first 50 hours of operation
  • 1.6.15.4. Inspection and maintenance as required
  • 1.6.15.5. Inspection and maintenance every 1000 hours (250 hours cold store version)
  • 1.6.15.6. Inspection and maintenance every 2000 hours (1000 hours cold storeversion)
  • 1.6.15.7. Inspection and maintenance every 5000 hours (2500 hours cold storeversion)
  • 1.6.15.8. Inspection and maintenance every 10000 hours or 5 years, whicheveris earlier (5000 hour or 30 months cold store version)
  • 1.6.16. Inspection and maintenance as required
  • 1.6.16.1. Clean the truck
  • 1.6.16.2. Check the battery electrolyte level and specific gravity
  • 1.6.16.3. Lubricate the lift chains and mast channels
  • 1.6.16.4. Adjust the lift chains
  • 1.6.16.5. Replace the hydraulic hoses and pipes
  • 1.6.16.6. Check the drive wheel nuts
  • 1.6.16.7. Replace the battery trolley slides
  • 1.6.17. hr Inspection and maintenance (250 hr cold store)
  • 1.6.17.1. Check the condition and security of the wheels and tyres
  • 1.6.17.2. Check the condition of the battery and battery cables
  • 1.6.17.3. Check the condition and security of electrical connections and cables
  • 1.6.17.4. Check the parking brake gap
  • 1.6.17.5. Check the hydraulic hoses and pipes for damage
  • 1.6.17.6. Check the lift chains for condition and security
  • 1.6.17.7. Lubricate the mast, mast rollers, lift chains and chain pulleys
  • 1.6.17.8. Lubricate the mast hose pulley assemblies (cold store only)
  • 1.6.17.9. Lubricate the reach channels and rollers
  • 1.6.17.10. Check and lubricate the battery trolley slides and associated mechanism
  • 1.6.17.11. Check the hydraulic oil level
  • 1.6.17.12. Lubricate the fork carriage and sideshift slider pad
  • 1.6.17.13. Check and lubricate the sideshift mechanism (Option on compact version)
  • 1.6.17.14. Check the pretension of the double hoses (Compact version)
  • 1.6.17.15. Lubricate the mast pivots (Compact version)
  • 1.6.17.16. Check the mast securing bolts (Compact version)
  • 1.6.17.17. Check condition of side guide rollers (option)
  • 1.6.17.18. Lubricate cold store cab hinges and door latch (option)
  • 1.6.18. hr Inspection and maintenance (1000 hr cold store)
  • 1.6.18.1. Check the brake fluid level
  • 1.6.18.2. Check the load wheel brake shoes for wear
  • 1.6.18.3. Replace the hydraulic tank breather filter
  • 1.6.18.4. Check the reach carriage rollers, adjust if required
  • 1.6.19. hr Inspection and maintenance (2500 hr cold store)
  • 1.6.19.1. Grease the load wheel bearings
  • 1.6.19.2. Check condition of brake pipes
  • 1.6.19.3. Change the hydraulic oil and suction filter
  • 1.6.20. hr Inspection and maintenance (5000 hr cold store)
  • 1.6.20.1. Change the brake fluid
  • 1.6.21. Taking the truck out of operation
  • 1.6.22. Decommissioning the truck
  • 1.7. Technical data
  • 1.7.1. Battery data
  • 1.7.2. Dimensions
  • 1.7.3. Technical data 1.4 tonne capacity
  • 1.7.4. Technical data 1.4 tonne capacity (heavy duty)
  • 1.7.5. Technical data 1.4 tonne capacity (narrow chassis)
  • 1.7.6. Technical data 1.6 tonne capacity
  • 1.7.7. Technical data 1.6 tonne capacity (heavy duty)
  • 1.7.8. Technical data 1.6 tonne capacity (narrow chassis)
  • 1.7.9. Technical data 2.0 tonne capacity
  • 1.7.10. Technical data 2.0 tonne capacity (narrow chassis)
  • 1.7.11. Mast variations
  • 1.7.12. Dimensions (compact version)
  • 1.7.13. Technical data 1.0 tonne capacity (compact version)
  • 1.7.14. Technical data 1.2 tonne capacity (compact version)
  • 1.7.15. Technical data 1.4 tonne capacity (compact version)
  • 1.7.16. Mast variations (compact version)
  • 1.8. Circuit diagrams
  • 1.8.1. Circuit Diagram (1 of 4)
  • 1.8.2. Circuit Diagram (2 of 4)
  • 1.8.3. Circuit Diagram (3 of 4)
  • 1.8.4. Circuit Diagram (4 of 4)
  • 1.8.5. Circuit diagram (Standard) keycode
  • 1.8.6. Circuit Diagram variable electric brake (1 of 4)
  • 1.8.7. Circuit Diagram variable electric brake (2 of 4)
  • 1.8.8. Circuit Diagram variable electric brake (3 of 4)
  • 1.8.9. Circuit Diagram variable electric brake (4 of 4)
  • 1.8.10. Circuit diagram (Variable electric brake) keycode
  • 1.8.11. Hydraulic circuit
  • 1.8.12. Hydraulic circuit keycode
  • 1.8.13. Hydraulic circuit (compact version)
  • 1.8.14. Hydraulic circuit (compact version) keycode
Rate this product
You may also like
Linde 1101-01 - EW27, EW36, EWR27, EWR36 Production site LMH-NA Operating Instructions

Linde Operator Manual PDF

Linde 1101-01 – EW27, EW36, EWR27, EWR36 Production site LMH-NA Operating Instructions

$20.00
Add to cart
Linde 1120-01 - R-matic, R10, R12, R14, R16, R20, R25 Operating Instructions SN 10.12 and up

Linde Operator Manual PDF

Linde 1120-01 – R-matic, R10, R12, R14, R16, R20, R25 Operating Instructions SN 10.12 and up

$20.00
Add to cart
Linde 1102-01 - ECR27, ECR36 Production site LMH-NA Operating Instructions

Linde Operator Manual PDF

Linde 1102-01 – ECR27, ECR36 Production site LMH-NA Operating Instructions

$20.00
Add to cart
Linde 033-01 - M25 EX Production site Proplan Operating Instructions

Linde Operator Manual PDF

Linde 033-01 – M25 EX Production site Proplan Operating Instructions

$20.00
Add to cart
Linde 015-01 - V10 Operating Instructions

Linde Operator Manual PDF

Linde 015-01 – V10 Operating Instructions

$20.00
Add to cart
Linde 1123-01 - R14SP, R16SP, R18SP Operating Instructions SN 12.09 and up

Linde Operator Manual PDF

Linde 1123-01 – R14SP, R16SP, R18SP Operating Instructions SN 12.09 and up

$20.00
Add to cart
Linde 008-01 - K13 Operating Instructions

Linde Operator Manual PDF

Linde 008-01 – K13 Operating Instructions

$20.00
Add to cart
Linde 1101-02 - EW30, EW40, EWR30, EWR40 Production site LMH-NA Operating Instructions SN A11101J00001 and up

Linde Operator Manual PDF

Linde 1101-02 – EW30, EW40, EWR30, EWR40 Production site LMH-NA Operating Instructions SN A11101J00001 and up

$20.00
Add to cart
Linde 049-01 - R25F Operating Instructions

Linde Operator Manual PDF

Linde 049-01 – R25F Operating Instructions

$20.00
Add to cart
Linde 1111-01 - N20C, N20VI, N20VLI Operating Instructions SN W41110V00529 and up

Linde Operator Manual PDF

Linde 1111-01 – N20C, N20VI, N20VLI Operating Instructions SN W41110V00529 and up

$20.00
Add to cart