Support
Email
admin@automanual.net
Follow us
Linde 1284-01 - E15B, E18B, E20B, E25B Production site Xiamen Operating Instructions SN B11284X00001 and up
Linde 1284-01 - E15B, E18B, E20B, E25B Production site Xiamen Operating Instructions SN B11284X00001 and up - Image 2
Linde 1284-01 - E15B, E18B, E20B, E25B Production site Xiamen Operating Instructions SN B11284X00001 and up - Image 3
Linde 1284-01 - E15B, E18B, E20B, E25B Production site Xiamen Operating Instructions SN B11284X00001 and up - Image 4
Linde 1284-01 - E15B, E18B, E20B, E25B Production site Xiamen Operating Instructions SN B11284X00001 and up - Image 5
linde 1284 01 e15b e18b e20b e25b production site xiamen operating instructions sn b11284x00001 and up 2
linde 1284 01 e15b e18b e20b e25b production site xiamen operating instructions sn b11284x00001 and up 3
linde 1284 01 e15b e18b e20b e25b production site xiamen operating instructions sn b11284x00001 and up 4
linde 1284 01 e15b e18b e20b e25b production site xiamen operating instructions sn b11284x00001 and up 5

Linde 1284-01 – E15B, E18B, E20B, E25B Production site Xiamen Operating Instructions SN B11284X00001 and up

$20.00

  • Type Of Manual: Operating Instructions
  • Manual ID: SN B11284X00001 and up
  • Format: PDF
  • Size: 32.2MB
  • Number of Pages: 174
  • Serial Number:
    SN B11284X00001 and up
Category:
  • Model List:

    • E15B
    • E18B
    • E20B
    • E25B
  • 1. Electric counterbalanced truckE15B, E18B, E20B, E25B, E30B, E35B
  • 1.1. Table of content
  • 1.2. Introduction
  • 1.2.1. General information
  • 1.2.2. Conformity marking
  • 1.2.3. Declaration that reflects the content of the declaration of conformity
  • 1.2.4. Nameplate
  • 1.2.5. Intended use
  • 1.2.6. Hazard assessment
  • 1.2.7. Improper use
  • 1.2.8. Symbols used
  • 1.2.9. Disposing of components and batteries
  • 1.2.10. Description of use and climatic conditions
  • 1.2.11. Technical description
  • 1.3. Safety
  • 1.3.1. Residual risks
  • 1.3.2. Stability
  • 1.3.3. In the case of tipover
  • 1.3.4. Operating company
  • 1.3.5. Drivers
  • 1.3.6. Competent person
  • 1.3.7. Regulations
  • 1.3.8. Fitting attachments
  • 1.3.9. Handling consumables
  • 1.3.10. Manually lowering the fork arms (3691 directional control valve optional)
  • 1.4. Overview
  • 1.4.1. General view
  • 1.4.2. Summary diagram of labels
  • 1.4.3. Controller and display unit
  • 1.4.4. Display unit
  • 1.4.5. Switch panel
  • 1.5. Operation
  • 1.5.1. Service plan before first start
  • 1.5.2. Instructions for runningin
  • 1.5.3. Preshift checks
  • 1.5.4. Daily inspection items
  • 1.5.5. Mounting.dismounting
  • 1.5.6. Seat belt status and performance checks
  • 1.5.6.1. Checking condition and performance
  • 1.5.6.2. Adjusting the seat and seat belt
  • 1.5.7. Horn operation
  • 1.5.8. Adjusting the steering column
  • 1.5.9. Emergency off switch
  • 1.5.10. Setting the display unit
  • 1.5.11. Switching the truck on and off
  • 1.5.12. RFID card reader (optional for LX)
  • 1.5.13. Driving (dual pedal operation)
  • 1.5.13.1. Driving (dual pedal)
  • 1.5.13.2. Forward and reverse movement (dual pedal)
  • 1.5.13.3. Changing the drive direction
  • 1.5.14. Driving (single pedal operation)
  • 1.5.14.1. Driving (single pedal)
  • 1.5.14.2. Forward and reverse movement (single pedal)
  • 1.5.14.3. Changing the drive direction
  • 1.5.15. Steering system
  • 1.5.16. Brake system
  • 1.5.16.1. Brake system information
  • 1.5.16.2. Foot brake.emergency brake
  • 1.5.16.3. Electronic regenerative braking
  • 1.5.16.4. Parking brake
  • 1.5.17. Lifting devices and attachments
  • 1.5.17.1. Operating the lifting device
  • 1.5.17.2. Operating attachments
  • 1.5.18. Transporting loads
  • 1.5.18.1. Load centre distance and load capacity
  • 1.5.18.2. Capacity rating plate
  • 1.5.18.3. Adjusting the fork spacing
  • 1.5.18.4. Loading
  • 1.5.18.5. Driving with a load
  • 1.5.18.6. Unloading
  • 1.5.18.7. Tow coupling
  • 1.5.18.8. Before exiting the truck
  • 1.5.19. Truck transport
  • 1.5.19.1. Removing the mast, towing regulations and procedure
  • 1.5.19.2. Driving without a lift mast
  • 1.5.19.3. Use a truck or flatbed trailer to carry the forklift truck
  • 1.5.19.4. Lifting the truck with a crane
  • 1.5.20. Truck storage
  • 1.5.20.1. Taking the truck out of operation
  • 1.5.20.2. Disposal of old trucks
  • 1.6. Maintenance
  • 1.6.1. Safety information for inspection and maintenance work
  • 1.6.2. Inspection and maintenance data
  • 1.6.3. Recommended fuels and oils
  • 1.6.4. Regular maintenance
  • 1.6.5. First service
  • 1.6.6. hour service plan
  • 1.6.7. hour service plan
  • 1.6.8. hour service plan
  • 1.6.9. Cleaning the truck
  • 1.6.10. Transmission system
  • 1.6.10.1. Checking for leaks and checking the mounting between the retarder case and the drive motor
  • 1.6.10.2. Checking for leakage and tightness between the retarder and drive axle
  • 1.6.10.3. Checking the retarder case and drive axle gearbox oil level
  • 1.6.10.4. Changing the retarder and drive axle gearbox oil
  • 1.6.10.5. Checking the fastening between the drive axle and chassis
  • 1.6.11. Steering axle and wheels
  • 1.6.11.1. Checking the tyres
  • 1.6.11.2. Checking the condition of the antistatic belt
  • 1.6.11.3. Tighten the wheel nuts
  • 1.6.11.4. Changing wheels
  • 1.6.11.5. Clean and lubricate the steering axle
  • 1.6.12. Chassis
  • 1.6.12.1. Checking seat belt condition and correct operation
  • 1.6.12.2. Battery cover
  • 1.6.12.3. Checking and tightening the bolts connecting the lift mast to the drive axle
  • 1.6.12.4. Checking other bearings and connections and lubricating
  • 1.6.13. Control system
  • 1.6.13.1. Checking the brake system
  • 1.6.13.2. Checking the horn is working normally
  • 1.6.13.3. Checking the joystick bellows
  • 1.6.13.4. Adjust joysticks
  • 1.6.13.5. Calibrating the accelerator pedal potentiometer
  • 1.6.13.6. Checking the pedal group for ease of movement and lubricating as required
  • 1.6.14. Electrical system
  • 1.6.14.1. Checking the power module for dirt and cleaning if necessary
  • 1.6.14.2. Checking the main contactor
  • 1.6.14.3. Checking fuses
  • 1.6.14.4. Checking electric cables
  • 1.6.14.5. Checking the operation of the fan and cleaning, if necessary
  • 1.6.14.6. Battery discharged
  • 1.6.14.7. Checking battery charging status
  • 1.6.14.8. Connecting the rechargeable battery to an external charger
  • 1.6.14.9. Preparing to change the battery
  • 1.6.14.10. Replacing the battery using a suspension arrangement (hoist)
  • 1.6.15. Hydraulics
  • 1.6.15.1. Checking the hydraulic oil level
  • 1.6.15.2. Checking the hydraulic system for leaks
  • 1.6.15.3. Checking the breather filter is working normally
  • 1.6.15.4. Checking the control valve unit is working normally
  • 1.6.16. Load lifting system
  • 1.6.16.1. Checking the fork arms and the fork arm quick release apparatus
  • 1.6.16.2. Checking the operation and installation of the lift mast, lifting chain and limit block
  • 1.6.16.3. Checking the fastening of the tilt cylinder eyebolt
  • 1.6.16.4. Lubricating the lift mast and chains with chain spray
  • 1.6.16.5. Adjusting the length of the lifting chains and lubricating using chain spray
  • 1.6.17. Special equipment
  • 1.6.17.1. Checking the preload of the double hoses (if equipped with attachments)
  • 1.6.17.2. Cleaning and lubricating the sideshift forks and checking connections
  • 1.7. Technical datasheet
  • 1.7.1. E15B.E18B Technical Datasheet
  • 1.7.2. E20B.E25B Technical Datasheet
  • 1.7.3. E30B.E35B Technical Datasheet
  • 1.7.4. Ecodesign requirements for electric motors and variable speed drives
Rate this product
You may also like
Linde 015-01 - V10 Operating Instructions

Linde Operator Manual PDF

Linde 015-01 – V10 Operating Instructions

$20.00
Add to cart
Linde 015-01 - V11-04, V11AC, V11N Operating Instructions

Linde Operator Manual PDF

Linde 015-01 – V11-04, V11AC, V11N Operating Instructions

$20.00
Add to cart
Linde 1120-01 - R-matic, R10, R12, R14, R16, R20, R25 Operating Instructions SN 10.12 and up

Linde Operator Manual PDF

Linde 1120-01 – R-matic, R10, R12, R14, R16, R20, R25 Operating Instructions SN 10.12 and up

$20.00
Add to cart
Linde 1111-01 - N20C, N20VI, N20VLI Operating Instructions SN W41110V00529 and up

Linde Operator Manual PDF

Linde 1111-01 – N20C, N20VI, N20VLI Operating Instructions SN W41110V00529 and up

$20.00
Add to cart
Linde 015-04 - V11, V12 Operating Instructions

Linde Operator Manual PDF

Linde 015-04 – V11, V12 Operating Instructions

$20.00
Add to cart
Linde 049-01 - R25F Operating Instructions

Linde Operator Manual PDF

Linde 049-01 – R25F Operating Instructions

$20.00
Add to cart
Linde 007-01 - K10 Operating Instructions

Linde Operator Manual PDF

Linde 007-01 – K10 Operating Instructions

$20.00
Add to cart
Linde 1103-02 - ETR50 Production site LMH-NA Operating Instructions SN A11103V00001 and up

Linde Operator Manual PDF

Linde 1103-02 – ETR50 Production site LMH-NA Operating Instructions SN A11103V00001 and up

$20.00
Add to cart
Linde 1110-01 - V08-01, V08-02 Operating Instructions SN 11.09 and up SN up to W41110V00528

Linde Operator Manual PDF

Linde 1110-01 – V08-01, V08-02 Operating Instructions SN 11.09 and up SN up to W41110V00528

$20.00
Add to cart
Linde 010-01 - K15-3 Operating Instructions

Linde Operator Manual PDF

Linde 010-01 – K15-3 Operating Instructions

$20.00
Add to cart