Support
Email
admin@automanual.net
Follow us
Linde 1287-01 - E40 to E50B Production site China, LX Operating Instructions SN C11287X00009 and up
Linde 1287-01 - E40 to E50B Production site China, LX Operating Instructions SN C11287X00009 and up - Image 2
Linde 1287-01 - E40 to E50B Production site China, LX Operating Instructions SN C11287X00009 and up - Image 3
Linde 1287-01 - E40 to E50B Production site China, LX Operating Instructions SN C11287X00009 and up - Image 4
Linde 1287-01 - E40 to E50B Production site China, LX Operating Instructions SN C11287X00009 and up - Image 5
linde 1287 01 e40 to e50b production site china lx operating instructions sn c11287x00009 and up 2
linde 1287 01 e40 to e50b production site china lx operating instructions sn c11287x00009 and up 3
linde 1287 01 e40 to e50b production site china lx operating instructions sn c11287x00009 and up 4
linde 1287 01 e40 to e50b production site china lx operating instructions sn c11287x00009 and up 5

Linde 1287-01 – E40 to E50B Production site China, LX Operating Instructions SN C11287X00009 and up

$20.00

  • Type Of Manual: Operating Instructions
  • Manual ID: SN C11287X00009 and up
  • Format: PDF
  • Size: 33.7MB
  • Number of Pages: 208
  • Serial Number:
    SN C11287X00009 and up
Category:
  • Model List:

    • E40
    • E40-20
    • E40B
    • E45
    • E45-20
    • E45B
    • E50
    • E50-20
    • E50B
  • 1. Electric Forklift TruckE40, E45, E50E4020, E4520, E5020
  • 1.1. Table of content
  • 1.2. Introduction
  • 1.2.1. Introduction
  • 1.2.2. General information
  • 1.2.3. Conformity marking
  • 1.2.4. Declaration that reflects the content of the declaration of conformity
  • 1.2.5. Intended use
  • 1.2.6. Hazard assessment
  • 1.2.7. Improper use
  • 1.2.8. Symbols used
  • 1.2.9. Disposing of components and batteries
  • 1.2.10. Description of use and climatic conditions
  • 1.2.11. Technical description
  • 1.3. Safety
  • 1.3.1. Residual risks
  • 1.3.2. Noise level
  • 1.3.3. Frequency characteristics for vibrations imparted to the human body
  • 1.3.4. Stability
  • 1.3.5. In the case of tipover
  • 1.3.6. Operating company
  • 1.3.7. Drivers
  • 1.3.8. Competent person
  • 1.3.9. Regulations
  • 1.3.10. Handling consumables
  • 1.3.11. Fitting attachments
  • 1.3.12. Emergency exit from drivers cab with windows
  • 1.3.13. Manually lowering the forks
  • 1.4. Overview
  • 1.4.1. General view
  • 1.4.2. Controller and display unit
  • 1.4.3. Summary diagram of labels
  • 1.4.4. Display unit
  • 1.4.5. Switch panel
  • 1.5. Operation
  • 1.5.1. Service plan before initial commissioning
  • 1.5.2. Instructions for runningin
  • 1.5.3. Preshift checks
  • 1.5.4. Daily inspection items
  • 1.5.5. Mounting.dismounting
  • 1.5.6. Seat belt status and performance checks
  • 1.5.6.1. Checking condition and performance
  • 1.5.6.2. Adjusting the drivers armrest
  • 1.5.6.3. Adjusting the seat and seat belt (comfort)
  • 1.5.6.4. Seat belt monitoring and alarm function
  • 1.5.7. Operating the horn
  • 1.5.8. Adjusting the steering column
  • 1.5.9. Setting the display unit
  • 1.5.10. Emergency off switch
  • 1.5.11. Switching the truck on and off
  • 1.5.12. Using the RFID Keypad (China only)
  • 1.5.12.1. RFID Keypad installation position
  • 1.5.12.2. RFID Keypad
  • 1.5.13. Driving (dual pedal operation)
  • 1.5.13.1. Driving
  • 1.5.13.2. Forward travel
  • 1.5.13.3. Reverse travel
  • 1.5.13.4. Changing the drive direction
  • 1.5.13.5. Starting on a slope
  • 1.5.14. Driving (single pedal operation)
  • 1.5.14.1. Driving
  • 1.5.14.2. Forward travel
  • 1.5.14.3. Reverse travel
  • 1.5.14.4. Changing the drive direction
  • 1.5.14.5. Forward travel E4020.E4520.E5020
  • 1.5.14.6. Reverse travel E4020.E4520.E5020
  • 1.5.14.7. Changing the drive direction E4020.E4520.E5020
  • 1.5.14.8. Starting on a slope
  • 1.5.15. Steering system
  • 1.5.16. Brake system
  • 1.5.16.1. Brake system information
  • 1.5.16.2. Foot brake.emergency brake
  • 1.5.16.3. Electronic regenerative braking
  • 1.5.16.4. Electronic parking brake
  • 1.5.16.5. Manually releasing the electronic parking brake
  • 1.5.17. Battery cover Open Closed
  • 1.5.18. Checking battery charging status
  • 1.5.19. Connecting the rechargeable battery to an external charger
  • 1.5.20. Lifting devices and attachments
  • 1.5.20.1. Operating the centralised joystick for the lift mast
  • 1.5.20.2. Operating the centralised joystick for attachments
  • 1.5.20.3. Lift mast singlelever operation
  • 1.5.20.4. Singlelever operation of attachments
  • 1.5.20.5. Operating the joystick for the lift mast_E4020.E4520.E5020
  • 1.5.20.6. Operating the joystick for attachments_E4020.E4520.E5020
  • 1.5.21. Transporting loads
  • 1.5.21.1. Load centre distance and load capacity
  • 1.5.21.2. Adjusting the fork spacing
  • 1.5.21.3. Picking up a load
  • 1.5.21.4. Loading
  • 1.5.21.5. Driving with a load
  • 1.5.21.6. Unloading
  • 1.5.21.7. Tow coupling
  • 1.5.21.8. Leaving the truck temporarily
  • 1.5.21.9. Before exiting the truck
  • 1.5.22. Truck transport
  • 1.5.22.1. Dismantling.installing the lift mast
  • 1.5.22.2. Regulations for removing the mast and towing
  • 1.5.22.3. Driving without a lift mast
  • 1.5.22.4. Use a truck or flatbed trailer to carry the forklift truck
  • 1.5.22.5. Lifting the truck with a crane
  • 1.5.22.6. Description of lifting points
  • 1.5.23. Truck storage
  • 1.5.23.1. Taking the truck out of operation
  • 1.5.24. Disposal of old trucks
  • 1.6. Maintenance
  • 1.6.1. Safety information for inspection and maintenance work
  • 1.6.2. Inspection and maintenance data
  • 1.6.3. Recommended fuels and oils
  • 1.6.4. Regular maintenance
  • 1.6.5. Service plan table
  • 1.6.6. Cleaning the truck
  • 1.6.7. Drive mechanism and transmission system
  • 1.6.7.1. Checking the oil level of the reduction gearbox
  • 1.6.7.2. Changing the reduction gearbox oil
  • 1.6.7.3. Checking the reduction gearbox for leaks
  • 1.6.7.4. Checking for leaks and checking the mounting between the reduction gearbox and the drive motor
  • 1.6.7.5. Checking the fastening between the drive axle and chassis
  • 1.6.7.6. Checking the brake fluid level in the brake fluid reservoir
  • 1.6.7.7. Replacing the brake fluid in the brake fluid reservoir
  • 1.6.7.8. Checking the wheels
  • 1.6.7.9. Checking the condition of the antistatic belt
  • 1.6.7.10. Tighten the wheel nuts
  • 1.6.7.11. Changing wheels
  • 1.6.7.12. Lubricating the steering axle
  • 1.6.8. Chassis and bodywork
  • 1.6.8.1. Checking other bearings and connections and lubricating
  • 1.6.8.2. Checking the installation of the bearing connecting the lifting mast on the drive axle
  • 1.6.8.3. Checking and tightening bolts connecting the lift mast onto the drive axle
  • 1.6.9. Drivers cab
  • 1.6.9.1. Checking seat belt condition and correct operation
  • 1.6.9.2. Checking the brake system
  • 1.6.9.3. Checking the horn is working normally
  • 1.6.9.4. Checking the joystick bellows
  • 1.6.9.5. Adjust joysticks
  • 1.6.9.6. Calibrating the accelerator pedal potentiometer
  • 1.6.9.7. Checking the pedal group for ease of movement and lubricating as required
  • 1.6.9.8. Checking the battery cover locking devices
  • 1.6.10. Electrics.electronics
  • 1.6.10.1. Checking the power module for dirt and cleaning if necessary
  • 1.6.10.2. Checking the main contactor
  • 1.6.10.3. Checking the operation of the fan and cleaning, if necessary
  • 1.6.10.4. Checking electric cables
  • 1.6.10.5. Fuses
  • 1.6.10.6. Fuse box
  • 1.6.10.7. Leadacid battery discharge
  • 1.6.10.8. Changing the battery
  • 1.6.10.9. Replacing the battery using a suspension arrangement
  • 1.6.10.10. Inspecting and maintaining the lithiumion battery
  • 1.6.11. Hydraulic system
  • 1.6.11.1. Checking the hydraulic system for leaks
  • 1.6.11.2. Checking the hydraulic oil level
  • 1.6.11.3. Changing the hydraulic oil
  • 1.6.11.4. Checking the breather filter is working normally
  • 1.6.11.5. Replacing the breather filter, high pressure filter and suction filter
  • 1.6.12. Lifting system
  • 1.6.12.1. Checking the fork arms and the fork arm quick release apparatus
  • 1.6.12.2. Checking the working condition and installation of the lift mast, lifting chains and lift cylinder
  • 1.6.12.3. Lubricating the lift mast and chains with chain spray
  • 1.6.12.4. Adjusting the length of the lifting chains and lubricating using chain spray
  • 1.6.13. Special equipment
  • 1.6.13.1. Checking the preload of the double hoses (if equipped with attachments)
  • 1.6.13.2. Cleaning and lubricating the sideshift forks and checking connections
  • 1.7. Technical datasheet
  • 1.7.1. Dimensions overview
  • 1.7.2. Technical datasheet
  • 1.7.3. Technical datasheet load centre of gravity distance 600
  • 1.7.4. Ecodesign requirements for electric motors and variable speed drives
Rate this product
You may also like
Linde 015-01 - V11-04, V11AC, V11N Operating Instructions

Linde Operator Manual PDF

Linde 015-01 – V11-04, V11AC, V11N Operating Instructions

$20.00
Add to cart
Linde 009-01 - K15-4 Operating Instructions

Linde Operator Manual PDF

Linde 009-01 – K15-4 Operating Instructions

$20.00
Add to cart
Linde 015-01 - V12-04, V12AC, V12N Operating Instructions

Linde Operator Manual PDF

Linde 015-01 – V12-04, V12AC, V12N Operating Instructions

$20.00
Add to cart
Linde 015-04 - V11, V12 Operating Instructions

Linde Operator Manual PDF

Linde 015-04 – V11, V12 Operating Instructions

$20.00
Add to cart
Linde 1101-01 - EW27, EW36, EWR27, EWR36 Production site LMH-NA Operating Instructions

Linde Operator Manual PDF

Linde 1101-01 – EW27, EW36, EWR27, EWR36 Production site LMH-NA Operating Instructions

$20.00
Add to cart
Linde 1110-01 - V08-01, V08-02 Operating Instructions SN 11.09 and up SN up to W41110V00528

Linde Operator Manual PDF

Linde 1110-01 – V08-01, V08-02 Operating Instructions SN 11.09 and up SN up to W41110V00528

$20.00
Add to cart
Linde 011-01 - K Generation 1 2, K Generation 3, K Generation 4 Operating Instructions

Linde Operator Manual PDF

Linde 011-01 – K Generation 1 2, K Generation 3, K Generation 4 Operating Instructions

$20.00
Add to cart
Linde 033-01 - M10X, M25 Operating Instructions

Linde Operator Manual PDF

Linde 033-01 – M10X, M25 Operating Instructions

$20.00
Add to cart
Linde 008-01 - K13 Operating Instructions

Linde Operator Manual PDF

Linde 008-01 – K13 Operating Instructions

$20.00
Add to cart
Linde 1101-02 - EW30, EW40, EWR30, EWR40 Production site LMH-NA Operating Instructions SN A11101J00001 and up

Linde Operator Manual PDF

Linde 1101-02 – EW30, EW40, EWR30, EWR40 Production site LMH-NA Operating Instructions SN A11101J00001 and up

$20.00
Add to cart