Support
Email
admin@automanual.net
Follow us
Linde 388-01 - E35 EX 3GD, E40 EX 3GD, E45 EX 3GD, E50 EX 3GD Operating Instructions SN H2X388G00674 and up
Linde 388-01 - E35 EX 3GD, E40 EX 3GD, E45 EX 3GD, E50 EX 3GD Operating Instructions SN H2X388G00674 and up - Image 2
Linde 388-01 - E35 EX 3GD, E40 EX 3GD, E45 EX 3GD, E50 EX 3GD Operating Instructions SN H2X388G00674 and up - Image 3
Linde 388-01 - E35 EX 3GD, E40 EX 3GD, E45 EX 3GD, E50 EX 3GD Operating Instructions SN H2X388G00674 and up - Image 4
Linde 388-01 - E35 EX 3GD, E40 EX 3GD, E45 EX 3GD, E50 EX 3GD Operating Instructions SN H2X388G00674 and up - Image 5
linde 388 01 e35 ex 3gd e40 ex 3gd e45 ex 3gd e50 ex 3gd operating instructions sn h2x388g00674 and up 2
linde 388 01 e35 ex 3gd e40 ex 3gd e45 ex 3gd e50 ex 3gd operating instructions sn h2x388g00674 and up 3
linde 388 01 e35 ex 3gd e40 ex 3gd e45 ex 3gd e50 ex 3gd operating instructions sn h2x388g00674 and up 4
linde 388 01 e35 ex 3gd e40 ex 3gd e45 ex 3gd e50 ex 3gd operating instructions sn h2x388g00674 and up 5

Linde 388-01 – E35 EX 3GD, E40 EX 3GD, E45 EX 3GD, E50 EX 3GD Operating Instructions SN H2X388G00674 and up

$20.00

  • Type Of Manual: Operating Instructions
  • Manual ID: SN H2X388G00674 and up
  • Format: PDF
  • Size: 30.2MB
  • Number of Pages: 293
  • Serial Number:
    SN H2X388G00674 and up
Category:
  • Model List:

    • E35 EX 3GD
    • E40 EX 3GD
    • E45 EX 3GD
    • E50 EX 3GD
  • 1. Electric forklift trucksE35EX E50EX
  • 1.1. Table of content
  • 1.2. Introduction
  • 1.2.1. Your industrial truck
  • 1.2.2. Intended use
  • 1.2.3. Impermissible use
  • 1.2.4. Basic information on explosion protection
  • 1.2.5. Description of use and climatic conditions
  • 1.2.6. Symbols used
  • 1.2.7. Technical description
  • 1.2.8. Receiving the industrial truck
  • 1.2.9. Legal requirements for marketing
  • 1.2.10. Disposing of components and batteries
  • 1.3. Safety
  • 1.3.1. Safety guidelines
  • 1.3.2. Residual risks
  • 1.3.3. Stability
  • 1.3.4. In the case of tipover
  • 1.3.5. Handling consumables
  • 1.3.6. Qualified person
  • 1.3.7. Periodic safety inspection
  • 1.3.8. Fitting attachments
  • 1.3.9. Emergency exit with attached rear window
  • 1.3.10. Emergency lowering
  • 1.3.11. Emergency lowering for trucks with an elevated drivers compartment
  • 1.3.12. Towing
  • 1.4. Overview
  • 1.4.1. Identification plate
  • 1.4.2. Nameplate
  • 1.4.3. Truck overview
  • 1.4.4. Operating devices
  • 1.4.5. Display unit
  • 1.4.6. Display unit
  • 1.4.7. Switch panel
  • 1.5. Operation
  • 1.5.1. Service plan before initial commissioning
  • 1.5.2. Instructions for runningin
  • 1.5.3. Preshift checks
  • 1.5.4. Regular maintenance
  • 1.5.5. Standard equipment
  • 1.5.5.1. Entering and exiting the truck
  • 1.5.5.2. Minimum distance between head and overhead guard
  • 1.5.5.3. Standard drivers seat and comfort drivers seat
  • 1.5.5.4. Adjusting the drivers seat armrest
  • 1.5.5.5. Adjusting the steering column
  • 1.5.5.6. Adjusting the time
  • 1.5.5.7. Adjusting the time, zone 22
  • 1.5.5.8. Seat belt
  • 1.5.5.9. Switching the truck on and off
  • 1.5.5.10. Driving (dualpedal operation)
  • 1.5.5.11. Driving (singlepedal operation)
  • 1.5.5.12. Steering system
  • 1.5.5.13. Brake system
  • 1.5.5.14. Horn
  • 1.5.5.15. Turn indicator
  • 1.5.5.16. Joystick Centrallever operation
  • 1.5.5.17. Joystick Singlelever operation
  • 1.5.5.18. Emergency off switch
  • 1.5.5.19. Battery discharged
  • 1.5.5.20. Checking the charging state of the battery
  • 1.5.5.21. Battery hoodOpening Closing
  • 1.5.5.22. Charging the battery using an external battery charger
  • 1.5.5.23. Replacing the battery
  • 1.5.5.24. Replacing the battery on a truck with an elevated drivers compartment
  • 1.5.6. Special equipment
  • 1.5.6.1. Adjusting the drivers seat with rotating device
  • 1.5.6.2. Mast positioning
  • 1.5.6.3. Steering angle display
  • 1.5.6.4. Depressurisation
  • 1.5.6.5. Lighting
  • 1.5.6.6. BlueSpot
  • 1.5.6.7. Windscreen wipers
  • 1.5.6.8. Heating system
  • 1.5.6.9. Truck data management (LFM)
  • 1.5.6.10. Reducingthe driving speed
  • 1.5.7. Working with a load
  • 1.5.7.1. Load capacity diagram
  • 1.5.7.2. Adjusting the fork arm distance
  • 1.5.7.3. Load pick up
  • 1.5.7.4. Driving under load
  • 1.5.7.5. Setting down loads
  • 1.5.7.6. Towing device
  • 1.5.8. Before exiting the truck
  • 1.5.9. Loading . transporting
  • 1.5.9.1. Removing.attaching the lift mast
  • 1.5.9.2. Driving without the lift mast
  • 1.5.9.3. Crane loading
  • 1.5.9.4. Transporting the truck using a lorry or flatbed trailer
  • 1.6. Service work
  • 1.6.1. Safety information regarding servicing work
  • 1.6.2. Inspection data and maintenance data
  • 1.6.3. Consumables
  • 1.6.4. Service plan
  • 1.6.5. Additional service plan for explosion protection
  • 1.6.6. Gearbox
  • 1.6.6.1. Checking the oil level in the planetary transmission
  • 1.6.6.2. Checking the planetary transmission for leak tightness
  • 1.6.7. Chassis, bodywork and fittings
  • 1.6.7.1. Cleaning the industrial truck
  • 1.6.7.2. Checking and lubricating the bearing points and joints
  • 1.6.7.3. Battery door and battery hoodLubricating the bolts, hinges and interlocks
  • 1.6.7.4. Battery door and battery hoodChecking and adjusting the interlocks
  • 1.6.7.5. Battery compartment Checking the battery side stop
  • 1.6.7.6. Checking the condition and correct function of the seat belt
  • 1.6.7.7. Washer system (special equipment) Topping up the container
  • 1.6.8. Chassis frame
  • 1.6.8.1. Wheel change
  • 1.6.8.2. Tightening the wheel fastenings
  • 1.6.8.3. Checking the wheels for damage, foreign objects and wear
  • 1.6.8.4. Lubricating the steering axle
  • 1.6.9. Operating devices
  • 1.6.9.1. Checking the brake system for correct function
  • 1.6.9.2. Checking and lubricating the pedal group and linkage
  • 1.6.10. Electrical enclosure
  • 1.6.10.1. Checking the condition of the electric cables and connections
  • 1.6.10.2. Checking the condition of the drive battery
  • 1.6.10.3. Checking the cables and the plugs on the drive battery
  • 1.6.10.4. Checking the heat sinks on the power modules for contamination and cleaning the heat sinks
  • 1.6.10.5. Cleaning the fans
  • 1.6.10.6. Checking the condition and secure attachment of electric cables, cable connectors, cable connections and explosionprotected screw joints
  • 1.6.11. Hydraulics
  • 1.6.11.1. Hydraulic systemChecking the oil level
  • 1.6.11.2. Hydraulic systemChecking for leak tightness
  • 1.6.11.3. Cleaning the radiator
  • 1.6.11.4. Checking that the bleeder valve on the hydraulic tank is functioning correctly
  • 1.6.11.5. Hose linesChecking the preload
  • 1.6.12. Load lift system
  • 1.6.12.1. Working on the lift mast and at the front of the truck
  • 1.6.12.2. Checking the condition of the lift mast
  • 1.6.12.3. Cleaning and spraying the lift mast chain
  • 1.6.12.4. Adjusting the lift mast chain
  • 1.6.12.5. Checking the fork arms and fork arm locking devices
  • 1.6.13. Checking and lubricating the sideshift (special equipment)
  • 1.6.14. Selfhelp
  • 1.6.14.1. Fuses Basic equipment
  • 1.6.14.2. Fuses Special equipment
  • 1.6.14.3. Diagnostic connector
  • 1.6.14.4. Malfunction displays
  • 1.6.14.5. Malfunctions, causes and remedies Hydraulic system
  • 1.6.15. Decommissioning
  • 1.6.15.1. Shutting down the industrial truck
  • 1.6.15.2. Disposal of old trucks
  • 1.7. Technical data
  • 1.7.1. Overview of dimensions
  • 1.7.2. Overview of type sheets
  • 1.7.3. Lift mast data
  • 1.7.4. Truck configuration
  • 1.7.5. Tyre variants andrim sizes
  • 1.7.6. Additional capacity rating plate for attachments
  • 1.7.7. Noise emission values
  • 1.7.8. Vibration characteristics for body vibrations
  • 2. Electric trucksE35 Ex, E40 Ex, E45 Ex, E50 ExH2X388V01505
  • 3. Leadacid battery charger 24V . 48V . 80V
Rate this product
You may also like
Linde 1110-01 - N20C, N20VI, N20VLI, V08-01, V08-02 Operating Instructions SN W41110V00529 and up

Linde Operator Manual PDF

Linde 1110-01 – N20C, N20VI, N20VLI, V08-01, V08-02 Operating Instructions SN W41110V00529 and up

$20.00
Add to cart
Linde 1110-01 - V08-01, V08-02 Operating Instructions SN 11.09 and up SN up to W41110V00528

Linde Operator Manual PDF

Linde 1110-01 – V08-01, V08-02 Operating Instructions SN 11.09 and up SN up to W41110V00528

$20.00
Add to cart
Linde 1120-01 - R14-R20 HD EX Operating Instructions

Linde Operator Manual PDF

Linde 1120-01 – R14-R20 HD EX Operating Instructions

$20.00
Add to cart
Linde 049-01 - R25F Operating Instructions

Linde Operator Manual PDF

Linde 049-01 – R25F Operating Instructions

$20.00
Add to cart
Linde 010-01 - K15-3 Operating Instructions

Linde Operator Manual PDF

Linde 010-01 – K15-3 Operating Instructions

$20.00
Add to cart
Linde 015-01 - V10 Operating Instructions

Linde Operator Manual PDF

Linde 015-01 – V10 Operating Instructions

$20.00
Add to cart
Linde 013-01 - K13-3 Operating Instructions

Linde Operator Manual PDF

Linde 013-01 – K13-3 Operating Instructions

$20.00
Add to cart
Linde 035-01 - L10AC, L12AC, L16AC Operating Instructions

Linde Operator Manual PDF

Linde 035-01 – L10AC, L12AC, L16AC Operating Instructions

$20.00
Add to cart
Linde 033-01 - M25 EX Production site Proplan Operating Instructions

Linde Operator Manual PDF

Linde 033-01 – M25 EX Production site Proplan Operating Instructions

$20.00
Add to cart
Linde 1103-01 - ETR45 Production site LMH-NA Operating Instructions

Linde Operator Manual PDF

Linde 1103-01 – ETR45 Production site LMH-NA Operating Instructions

$20.00
Add to cart