new holland 25 workmaster tier 4b final compact tractor operation and maintenance manual 51414247 1

new holland 25 workmaster tier 4b final compact tractor operation and maintenance manual 51414247 2

new holland 25 workmaster tier 4b final compact tractor operation and maintenance manual 51414247 3

new holland 25 workmaster tier 4b final compact tractor operation and maintenance manual 51414247 4

new holland 25 workmaster tier 4b final compact tractor operation and maintenance manual 51414247 5

New Holland 25 Workmaster Tier 4B Final Compact Tractor Operation and Maintenance Manual 51414247

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 51414247
Format: PDF
Size: 18.6MB
Number of Pages: 198
Serial Number:
51414247

Category: New Holland Operator Manual PDF

Model List:
- 25 Workmaster Tier 4B Final Compact Tractor

1. GENERAL INFORMATION
1.1. Note to the Owner
1.2. Intended use
1.3. ElectroMagnetic Compatibility (EMC)
1.4. Product Identification Number (PIN)
1.5. Operators manual storage
1.6. Machine orientation
1.7. Emissions overview
2. SAFETY INFORMATION
2.1. Safety rules and signal word definitions
2.2. Safety rules
2.3. Do not operate tag
2.4. Ecology and the environment
2.5. Safety signs
2.6. Instructional signs
3. CONTROLS AND INSTRUMENTS
3.1. Operators seat
3.1.1. Seat belt
3.1.2. Seat controls
3.1.3. RollOver Protective Structure (ROPS)
3.2. Forward controls
3.2.1. Instrument cluster panel
3.2.2. Cruise control
3.2.3. Transmission shuttle shift lever
3.2.4. Clutch pedal
3.2.5. Brake pedals
3.2.6. Foot throttle pedal
3.2.7. Hand throttle lever
3.2.8. Horn switch (optional)
3.2.9. Power TakeOff (PTO) switch
3.2.10. Key switch
3.2.11. Differential lock pedal
3.2.12. Hydrostatic Transmission (HST) foot pedals
3.2.13. Multifunctional light switch
3.3. Lefthand side controls
3.3.1. Transmission range lever
3.3.2. Park brake lever
3.3.3. FourWheel Drive (4WD) lever
3.3.4. Mid Power TakeOff (PTO) lever
3.4. Righthand side controls
3.4.1. Hydraulic Power Lift (HPL) lever
3.4.2. Rear remote control valve(s) optional
3.4.3. Transmission speed shift lever
3.5. Exterior controls
3.5.1. Hood release lever
4. OPERATING INSTRUCTIONS
4.1. Commissioning the unit
4.1.1. Engine breakin procedure
4.1.2. Power TakeOff (PTO) Operation
4.1.3. Rear threepoint hitch
4.1.4. Attaching threepoint hitch equipment
4.1.5. Drawbar Operation
4.1.6. Top link adjustment
4.1.7. Hydraulic Power Lift (HPL) drop rate control valve
4.2. Starting the unit
4.2.1. Starting the engine
4.2.2. Cold starting aids
4.2.3. Starting the tractor with jumper cables
4.3. Stopping the unit
4.3.1. Stopping the engine
4.3.2. Service brakes
4.3.3. Emergency stopping
4.4. Moving the unit
4.4.1. Steering Operation
4.4.2. Hydrostatic Transmission (HST) Operation
4.4.3. Transmission operation at low ambient temperatures
4.4.4. x 12 transmission Operation
4.5. Parking the unit
4.5.1. Park brake Operation
5. TRANSPORT OPERATIONS
5.1. Road transport
5.1.1. External lighting Identification
5.1.2. Hazard warning light Operation
5.1.3. Turn signal Operation
5.1.4. Road light/work light Operation
5.1.5. Rear work light (optional)
5.1.6. Driving the vehicle
5.2. Shipping transport
5.2.1. Carrying the tractor on a transporter
5.3. Recovery transport
5.3.1. Towing the tractor for recovery
6. WORKING OPERATIONS
6.1. General information
6.1.1. Ballasting the tractor
6.1.2. Tractor ballasting weights
6.1.3. Operator presence system
7. MAINTENANCE
7.1. General information
7.1.1. General information
7.1.2. Safety rules
7.1.3. Biodiesel fuels
7.1.4. Refueling the tractor
7.1.5. Consumables
7.1.6. Engine cooling system Basic instructions
7.2. Maintenance planning
7.2.1. Maintenance chart
7.3. Every 8 hours or daily
7.3.1. Engine lubrication system Check
7.3.2. Engine cooling system Check
7.3.3. Transmission Check
7.3.4. Radiator screen cleaning
7.4. After first 50 hours
7.4.1. Engine lubrication system Change fluid
7.4.2. Fuel filters Replace
7.4.3. Hydraulic oil suction filter Replace
7.4.4. Hydrostatic Transmission (HST) oil filter Replace
7.4.5. Roll Over Protective Structure (ROPS) frame Check
7.4.6. Wheel hardware Check
7.5. Every 50 hours
7.5.1. Machine fittings Grease
7.5.2. Transmission Check
7.5.3. Tire pressure Check
7.5.4. Clutch Pedal Free Play Check
7.5.5. Hydrostatic transmission (HST) neutral adjustment Check
7.5.6. Belt Check
7.5.7. Mechanical service brakes Check
7.5.8. Front axle differential fluid level Check
7.5.9. Air cleaner Outer element Cleaning
7.6. Every 250 hours
7.6.1. Engine lubrication system Change fluid
7.6.2. Fuel filters Replace
7.6.3. Oil filter Replace
7.6.4. Oil filter Replace
7.6.5. Air cleaner Outer element Replace
7.6.6. Front wheels Tighten
7.6.7. Roll Over Protective Structure (ROPS) frame Check
7.7. Every 500 hours
7.7.1. Front axle and differential fluid Change
7.7.2. Transmission Change fluid
7.7.3. Air cleaner Inner element Replace
7.7.4. Valves Check
7.8. Every two years
7.8.1. Engine cooling system Drain fluid
7.9. As required
7.9.1. Fuel injection system Bleed
7.9.2. Roll Over Protective Structure (ROPS) frame Replace Possible damage
7.9.3. Battery Test
7.9.4. Fuses Check
7.9.5. Main fuse Check
7.9.6. Headlight Replace
7.9.7. Tail light and brake light bulb Replace
7.9.8. Turn signal and hazard bulb Replace
7.9.9. Front wheels toein Check
7.9.10. Belt Adjust
7.10. Storage
7.10.1. Storing the tractor
7.10.2. Removing the tractor from storage
8. TROUBLESHOOTING
8.1. Symptom(s)
8.1.1. Troubleshooting Foreword
8.1.2. Engine Troubleshooting
8.1.3. Clutch Troubleshooting
8.1.4. Mechanical service brakes Troubleshooting
8.1.5. Regulated/Low pressure system Troubleshooting
8.1.6. Steering Troubleshooting
8.1.7. Hydrostatic transmission Troubleshooting
8.1.8. Electrical system Troubleshooting
9. SPECIFICATIONS
9.1. Wheel tread settings
9.2. Tire inflation pressures
9.3. General specifications
9.4. Tractor dimensions
10. ACCESSORIES
10.1. Optional equipment
11. FORMS AND DECLARATIONS
11.1. Predelivery report Dealers copy
11.2. Predelivery report Owners copy

Rate this product