New Holland 65, 75 PowerStart Tractor Operation and Maintenance Manual 51519280

New Holland 65, 75 PowerStart Tractor Operation and Maintenance Manual 51519280 - Image 2

New Holland 65, 75 PowerStart Tractor Operation and Maintenance Manual 51519280 - Image 3

New Holland 65, 75 PowerStart Tractor Operation and Maintenance Manual 51519280 - Image 4

New Holland 65, 75 PowerStart Tractor Operation and Maintenance Manual 51519280 - Image 5

new holland 65 75 powerstart tractor operation and maintenance manual 51519280 2

new holland 65 75 powerstart tractor operation and maintenance manual 51519280 3

New Holland 65, 75 PowerStart Tractor Operation and Maintenance Manual 51519280

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 51519280
Format: PDF
Size: 20.3MB
Number of Pages: 280
Serial Number:
51519280

Category: New Holland Operator Manual PDF

Model List:
- 65 PowerStart Tractor
- 75 PowerStart Tractor

1. GENERAL INFORMATION
1.1. Note to the Owner
1.2. Introduction
1.3. Intended use
1.4. Electromagnetic interference (EMC)
1.5. International symbols
1.6. Identification plates
1.7. Machine orientation
1.8. Operators manual storage
1.9. Ecology and the Environment
2. SAFETY INFORMATION
2.1. Safety rules and signal word definitions
2.2. Safety rules General information
2.3. Safety rules Maintenance
2.4. Safety rules Wheels and tires
2.5. Safety rules Explosions and fires
2.6. Safety rules Fire extinguisher
2.7. Safety rules Battery
2.8. Safety rules Power TakeOff (PTO)
2.9. Safety rules Seat belts
2.10. Safety rules Operator protective structure
2.11. Safety rules HVAC system
2.12. Safety rules Personal Protective Equipment (PPE)
2.13. Safety rules Do not use sign
2.14. Safety rules Hazardous chemicals
2.15. Safety rules Near utilities
2.16. Safety rules In the event of electrical storms
2.17. Safety rules Mounting and dismounting the machine
2.18. Safety rules Lifting and overhead loads
2.19. Ecology and environment
2.20. Towing the tractor for recovery
2.21. Tractor jacking points
2.22. Burn prevention
2.23. Fire and explosion prevention
2.24. Access to operators platform
2.25. Safety signs
3. CONTROLS AND INSTRUMENTS
3.1. ACCESS TO OPERATORS PLATFORM
3.2. OPERATORS SEAT
3.3. INSTRUCTORS SEAT
3.4. FORWARD CONTROLS
3.5. LEFTHAND SIDE CONTROLS
3.6. RIGHTHAND SIDE CONTROLS
3.7. Power sockets
3.8. Settings and display
4. OPERATING INSTRUCTIONS
4.1. COMMISSIONING THE UNIT
4.2. STARTING THE UNIT
4.3. STOPPING THE UNIT
4.4. MOVING THE UNIT
5. TRANSPORT OPERATIONS
5.1. ROAD TRANSPORT
5.2. RECOVERY TRANSPORT
6. WORKING OPERATIONS
6.1. GENERAL INFORMATION
6.2. Transmission
6.3. FOUR WHEEL DRIVE (4WD)
6.4. DIFFERENTIAL LOCK
6.5. REAR POWER TAKEOFF (PTO)
6.6. REAR REMOTE CONTROL VALVE(S)
6.7. REAR HYDRAULIC LIFT
6.8. Threepoint hitch
6.9. Front loader
6.10. TOWBAR
6.11. WHEELS AND TIRES
6.12. GENERAL INFORMATION
6.13. MAINTENANCE CHART
6.14. As necessary
6.15. AT WARNING MESSAGE DISPLAY
6.16. Every 10 hours or daily
6.17. After the first 50 hours of operation
6.18. Every 50 hours
6.19. Every 100 hours
6.20. Every 300 hours
6.21. Every 600 hours
6.22. Every 1200 hours or annually
6.23. Every 1200 hours or two years
6.24. Every two years
6.25. Every 3600 hours or four years
6.26. Electrical system
6.27. STORAGE
7. TROUBLESHOOTING
7.1. FAULT CODE RESOLUTION
7.2. ALARM(S)
8. SPECIFICATIONS
8.1. Dimensions and weights
8.2. Maximum permitted loads on front and rear axle
8.3. Speed table for 8 x 8 gearbox
8.4. Speed table for 8 x 8 gearbox with additional reducer (12 x 12)
8.5. x 12 transmission speed table
8.6. Speed table for 12 x 12 gearbox with additional reducer (20 x 20)
8.7. Technical data
8.8. Consumables
8.9. Capacities
8.10. Engine oil temperature chart
8.11. Loader specifications
9. ACCESSORIES
9.1. Radio
9.2. Single piece ballast
9.3. Coolant immersion heater (where fitted)

Rate this product