Yanmar ViO80-1A Excavator Operation Manual

Yanmar ViO80-1A Excavator Operation Manual - Image 2

Yanmar ViO80-1A Excavator Operation Manual - Image 3

Yanmar ViO80-1A Excavator Operation Manual - Image 4

Yanmar ViO80-1A Excavator Operation Manual - Image 5

yanmar vio80 1a excavator operation manual 2

yanmar vio80 1a excavator operation manual 3

Yanmar ViO80-1A Excavator Operation Manual

$20.00

Type Of Manual: Operation Manual
Number of Pages: 226
Size: 24.6MB
Format: PDF

Category: Yanmar Operator Manual PDF

Model List:
- ViO80-1A Excavator

1. YANMAR COMPACT GERMANY GMBH THANK YOU FOR PURCHASING A YANMAR MACHINE
2. Introduction
3. Safety signals
4. A Description and illustration of the machine
4.1. Applications and regulations
4.1.1. Applications
4.1.2. Warranty
4.1.3. Driving permits
4.1.4. Lifting
4.2. Identification plates
4.2.1. Machine serial number plate
4.2.2. Engine serial number plate
4.2.3. EPA information plate
4.2.4. Spare parts order and intervention request
4.3. Warning labels
4.3.1. Location of the warning adhesive labels
4.3.2. Explanation of the warning adhesive labels
4.4. Identification of important parts
4.4.1. General view of the machine
4.4.2. Commands and switches
4.5. Description of the driving position
4.5.1. Operator display station
4.5.1.1. Indicator lights
4.5.1.2. Clock
4.5.1.3. Time counter
4.5.1.4. Diesel gauge
4.5.1.5. Cooling fluid temperature indicator
4.5.1.6. Preheating light
4.5.1.7. Displaying the fuel consumption
4.5.1.8. Navigation keys
4.5.1.9. Information and error icons
4.5.2. Switches
4.5.2.1. Start key
4.5.2.2. Headlight switch
4.5.2.3. Horn
4.5.2.4. Windscreen wiper switch and windscreen wiper
4.5.2.5. Engine rate setting
4.5.2.6. Speed movement switch
4.5.2.7. Engine slow down switch
4.5.2.8. Eco mode switch
4.5.2.9. Engine stop switch
4.5.2.10. Manual regeneration
4.5.2.11. Interior lighting switch
4.5.3. Joysticks and pedals
4.5.3.1. Locking lever
4.5.3.2. Right command lever
4.5.3.3. d hydraulic circuit control (P.T.O. 1)
4.5.3.4. Left command lever
4.5.3.5. h hydraulic circuit control (P.T.O. 2)
4.5.3.6. Travel levers and pedals
4.5.3.7. Blade lever
4.5.3.8. Boom rotation pedal
4.5.4. Power socket
4.5.5. Drivers seat
4.5.6. Location for the tools and user manual
4.5.6.1. Toolkit
4.5.6.2. User manual
4.5.7. Fuses
4.5.7.1. Fusebox
4.5.8. Cabin
4.5.8.1. Cab side door
4.5.8.2. Upper windscreen
4.5.8.3. Lower windscreen
4.5.8.4. Right hand cab window
4.5.9. Headlights
4.5.10. Fleet management system SMARTASSIST-REMOTE
4.6. Operation of the air conditioning
4.7. Covers
4.7.1. Bonnet
4.7.2. Cover B
4.7.3. Cover R
4.8. Using the electric fuel filling pump
4.9. Options
4.9.1. Long arm
4.9.2. Half-circuit
4.9.3. Circuit breaker
4.9.4. Additional counterweights
4.9.5. Lifting Kit
4.9.5.1. Safety valves
4.9.5.2. Lifting ring
4.9.5.3. Overload box
4.9.5.4. Lifting Tables
4.9.6. Protection grill FOPS 2
4.9.7. Separator/decanter alarm
4.9.8. Plug-in beacon and rear LED light
4.9.9. Fleet management system
4.9.10. Radio
4.9.11. Quick hitch
4.9.12. Centralized greasing system
4.9.13. Continuous pressure hydraulic line
4.9.14. Mechanical quick hitch
4.9.14.1. Mechanical quick hitch L-SYSTEM
4.9.14.2. Powertilt using the L-SYSTEM mechanical quick coupler
4.9.14.3. Mechanical quick hitch ACB
4.9.15. Quick hydraulic hitch L-SYSTEM
4.9.15.1. Dismantling the accessory (Quick hitch control unit)
4.9.15.2. Mounting the accessory (Quick hitch control unit)
4.9.15.3. Dismantling the accessory (Quick hitch control switch)
4.9.15.4. Mounting the accessory (Quick hitch control switch)
4.9.16. Quick coupler key housing
4.9.17. Rubber rollers for use with steel tracks
5. B Operating instructions
5.1. Basic precautions
5.1.1. Comply with your workplaces safety rules
5.1.2. Put the safety mechanisms in place
5.1.3. Wear suitable clothing and protective equipment
5.1.4. Do not drive under the influence of alcohol, drugs or medication
5.1.5. Provide adequate ventilation when working in an enclosed space
5.1.6. Protect plants from hot air and exhaust fumes
5.1.7. Keep fuel and oil away from sparks
5.1.8. Avoid removing the caps when the temperatures are high
5.1.9. Avoid crush injuries due to accessories
5.1.10. Have an extinguisher and a first aid kit
5.1.11. Avoid any unauthorised modifications
5.1.12. Precautions for optional parts and tools
5.1.13. Warning concerning the cab windows
5.1.14. Cabins emergency exit
5.1.15. Air conditioning system
5.2. Usage precautions
5.2.1. Precautions before starting the engine
5.2.1.1. Make sure that your workplace is safe
5.2.1.2. Clean the machine
5.2.1.3. Check the safety structures
5.2.1.4. Check the position of the blade
5.2.1.5. Accessing the machine
5.2.1.6. Fasten your safety belt and adjust the rearview mirror(s)
5.2.2. Movement precautions
5.2.2.1. Machines Danger Zone
5.2.2.2. Movement and accessories
5.2.2.3. Driving the machine on a slope
5.2.3. Working precautions
5.2.3.1. Precautions for using the equipment
5.2.3.2. Dangerous tasks
5.2.3.3. Working near electricity lines
5.2.3.4. Working near obstacles
5.2.3.5. Emergency stop and securing the machine
5.2.3.6. Working on a slope
5.2.3.7. Working in an area covered with snow
5.2.3.8. Working on unstable ground
5.2.3.9. Working in a submerged area
5.2.3.10. Working in a muddy area
5.2.3.11. Working in an area with reduced visibility
5.2.4. Parking precautions
5.2.5. Precautions for the accessories
5.2.6. Precautions for using optional accessories
5.2.7. Precautions for the battery
5.3. Precautions for the engine
5.4. Checks before starting the machine
5.4.1. Overall visual inspection
5.4.2. Checking and topping up the level of cooling fluid
5.4.3. Checking and topping up the engine oil level
5.4.4. Checking and topping up the fuel level
5.4.5. Checking and topping up the hydraulic oil level
5.5. Checks after start-up
5.6. Checks after use
5.7. Operator LCD display station interfaces
5.7.1. Indication of functions
5.7.2. User Interface
5.7.3. Maintenance interface
5.7.4. Machine usage management interface
5.7.5. Configuration interface
5.8. Using the machine in cold weather
5.8.1. Preparation for use in cold weather
5.8.2. Starting in cold weather
5.8.3. Precautions after use
5.8.4. When cold weather is over
5.9. Rubber tracks
5.9.1. Correct use of rubber tracks
5.9.2. Comparison between rubber tracks / steel tracks
5.9.3. Rubber track warranty
5.9.4. Precautions for using rubber tracks
5.10. Handling the bucket
5.10.1. Machine stability when using with a bucket or an accessory
5.10.2. Compatible accessories
5.10.3. Operation of the retro bucket
5.10.4. Digging trenches
5.10.5. Loading
5.11. Handling of accessories
5.11.1. Hydraulic hammer SOCOMEC
5.12. Accessory change by direct coupling
5.12.1. Dismantling the accessory
5.12.2. Mounting the accessory
5.12.2.1. Loading bucket
5.13. Load lifting
5.14. Implementing the 3rd hydraulic circuit
5.14.1. Description
5.14.1.1. d circuit selector
5.14.2. Mounting the accessory
5.14.3. Precautions for using the accessory
5.15. Using the particle filter
5.15.1. Auto-regeneration
5.15.2. Assisted regeneration
5.15.3. Launching the regeneration
5.15.4. Manual regeneration of the particulate filter
5.16. Transporting the machine
5.16.1. Loading/unloading the machine
5.16.1.1. Precautions for loading/unloading the machine
5.16.1.2. Procedure
5.16.2. Immobilising the machine on the truck
5.16.3. Tying down the machine
5.16.4. Slinging the machine
5.17. Detecting anomalies
5.17.1. Phenomena that do not constitute faults
5.17.2. Detecting anomalies
5.17.2.1. Engine
5.17.2.2. Electrical equipment
5.17.2.3. Machine structure
5.18. If the battery is discharged
5.18.1. Precautions for connecting and disconnecting the starter cables
5.18.2. Connecting the starter cables
5.18.3. Starting the engine
5.18.4. Disconnecting the starter cables
5.18.5. Charging the battery
5.19. Towing the machine
6. C Periodic maintenance programme
6.1. Maintenance precautions
6.1.1. Precautions before maintenance
6.1.1.1. Removing the residual pressure
6.1.1.2. Place a warning label
6.1.1.3. Establish a safety perimeter
6.1.1.4. Keep the machine clean
6.1.2. Precautions during maintenance
6.1.2.1. Oil and grease
6.1.2.2. Tools
6.1.2.3. Parts
6.1.2.4. Dismantling the accessory
6.1.2.5. Working under the machine
6.1.2.6. Lighting
6.1.2.7. Battery
6.1.2.8. Hoses
6.1.2.9. Radiator ventilator
6.1.2.10. Soldering
6.1.2.11. Waste processing
6.2. Recommended greases and fluids
6.2.1. Cooling fluid
6.2.2. Engine oil
6.2.3. Fuel
6.2.4. Hydraulic oil
6.2.5. Gear oil
6.3. Periodic inspections and upkeeps
6.4. Maintenance by the operator
6.4.1. Daily maintenance
6.4.1.1. Checking the machine before use
6.4.1.2. Checking and cleaning the radiator fins
6.4.1.3. Greasing points
6.4.1.4. Cleaning the separator/decanter
6.4.1.5. Rubber track maintenance
6.4.1.6. Steel track maintenance
6.4.1.7. Checks after using the machine
6.4.2. Maintenance every 50 hours
6.4.2.1. Greasing the pin and rotation crown
6.4.2.2. Checking alternator belt tension
6.4.2.3. Engine silent-bloc bracket
6.4.3. Non periodic maintenance
6.4.3.1. Fuse replacement
6.4.3.2. Top up the windscreen washer fluid
6.4.3.3. Replacing the windscreen wiper
6.4.3.4. Accessory state check
6.4.3.5. Purging the fuel tank
6.4.3.6. Maintenance of the particle filter
6.5. Maintenance by the dealer
6.5.1. After the first 50 hours of service
7. D Conservation and storage
7.1. Conservation
7.2. Storage
7.3. Recommissioning
8. E Technical data
8.1. Specifications
8.2. Working dimensions
8.3. Noise emitted by the machine
8.4. Vibrations emitted by the machine
9. F Lifting capacities
9.1. Lifting ViO80-1A
9.2. Lifting ViO80-1A, with rear counterweight
10. Appendices
10.1. A Notes
10.2. B Lashing record

Rate this product